Historical Public Release Notes for Standalone Altium Designer

Build: 18 Date: 16 July 2025

Schematic

65153	In some cases when annotating schematics, an Access Violation (at address 00000001403B6B00 in module "WorkspaceManager.DLL") would be encountered.
65691	In some cases, attempting to move a placed component off of a schematic sheet (beyond the sheet's border) was not possible, depending on the rotation of the component.
66246	When attempting to multi-select a placed sheet symbol's designator and file name, the error "Exception has been thrown by the target of an invocation..." would be encountered.

PCB

23643	The violation overlay was not being displayed over solid polygon pours detected to be in violation of a 'Modified Polygon' design rule.
53495	When attempting to copy and paste formatted text from Microsoft Outlook/Word into a PCB document, an Access Violation (in module 'ADVPCB.DLL') would be encountered.
64315	When copying and pasting a via (without keeping the same net), the subsequent dialog with which to choose a net (to apply to the via) would freeze for a considerable length of time.
65486	When entering an expression into the Filter region of the PCB/PCBLIB Filter panel, the sorting of entries in a pop-up listing is now correctly sequential "1, 2, 3, 4, 5,..." instead of "1, 10, 2, 20, 21,...".
65622	As part of the PCB.Performance.InteractivePropertyPanel.Optimization option (Advanced Settings), the Properties panel has been further enhanced when working with a selected Embedded Board Array object, to increase performance and optimize access to object properties, especially with larger designs.
65727	When generating IPC-2581 (revision B) fabrication output from a PCB, polygon cutouts placed on power plane layers were incorrectly interpreted and exported as solid copper regions.
65744	When generating IPC-2581 (revision B) fabrication output from a PCB, keepout regions placed on the Top and Bottom layers were incorrectly interpreted and exported as solid copper regions. (BC:20905)
65757	Export of a PCB document to 'Protel PCB 2.8 ASCII' format was not working. The exported file contained no board data. (BC:25468)
65821	As part of the PCB.Performance.InteractivePropertyPanel.Optimization option (Advanced Settings), the Properties panel has been further enhanced when working with PCB library properties (when no objects are selected), to increase performance and optimize access to properties, especially with larger designs.
65905	As part of the PCB.Performance.InteractivePropertyPanel.Optimization option (Advanced Settings), the Properties region of the Polygon Pour Manager dialog has been enhanced when working with a selected polygon pour, to increase performance and optimize access to properties, especially with larger designs.
65906	As part of the PCB.Performance.InteractivePropertyPanel.Optimization option (Advanced Settings), the Properties panel has been further enhanced when working with a selected OLE/connection line object, to increase performance and optimize access to object properties, especially with larger designs.
65987	The relative Delay for each type of primitive is now calculated and stored to cache, facilitating a performance boost in Delay calculation when reopening a design and selecting a primitive for the first time.
66011	When interactively routing a differential pair and switching from the current pad/track to the target pad/track (using the '9' keyboard shortcut), an infinite-looping error "Second differential pair primitive could not be found" would be encountered. (BC:25634)
66072	With the Trace Loop Removal feature enabled, routing from an existing track to an unconnected pad (of the same net) would incorrectly remove existing track-to-pad routing.
66099	The 'QR and Data Matrix Code Support' feature, delivered by the PCB.QRCodes option (Advanced Settings), is now officially made Public with this release (ON by default).
66162	The 'Optimized Online DRC Processing' feature, delivered by the PCB.DRC.OnlineOptimization option (Advanced Settings), is now officially made Public with this release (ON by default).
66163	Nets were not being included when exporting a PCB as a Specctra Design file. (BC:25718)
66200	When attempting to fix a micro-segment issue through the PCB Health Check Monitor and the micro-segment has already been manually removed, the error "Object accessed after being destroyed..." would be encountered.
66206	Pads with different countersink and counterbore hole sizes were incorrectly assigned the same diameter tool in the PCB panel (in its Hole Size Editor mode) and in generated NC Drill output. (BC:25445)
66234	With a Net Antennae rule scoping a specific net, the PCB Rules and Constraints Editor dialog's 'Test Queries' feature erroneously reported zero applicable objects.

Constraint Manager

64692	When defining constraints for a clearance rule, clearance values for Top Layer and Bottom Layer were incorrectly being inherited from Inner Layers instead of Outer Layers.
65614	When defining constraints for a clearance rule, custom clearance values set for Outer Layers were being reset to defaults when changes to values for Inner Layers were reset to their defaults.
65837	In some cases while working with the Constraint Manager, the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered.
65976	In the All Rules view of the Constraint Manager (when accessed from the PCB), a warning and related highlighting has been added for a rule that contains a syntactically incorrect custom query expression and is therefore deemed invalid.
66073	After switching from the 'Default Stack' to a specific PCB and defining a clearance set, it was not possible to subsequently remove any assigned constraint sets. While they could be removed in-session, saving-closing-accessing the Constraint Manager would show them still present.

Draftsman

62223	In some cases when working with a Draftsman document, the error "EOleException: Board not found" would be encountered.
65923	Row visibility settings for a placed transmission line table were incorrectly being changed when importing changes from the linked PCB document and also when generating PDF output through an OutJob file. (BC:21909)

CAMtastic

65878

For ODB++ fabrication output generated from a specific panelized board, some drill drawing data for the panel was not being presented in the CAMtastic document.

3D-MID Design

65823	After initially importing components into a 3D-MID document (via ECO), attempting to move multiple selected components from free space onto the 3D substrate would result in an Access Violation (in module 'A3dEntry.dll') being encountered and, in some cases, forced closure of Altium Designer.
66105	The commands to 'Show All' and 'Hide All' net connection lines (on the View » Connections menu) were no longer working.

Multi-board Design

64950	Added the ability to define an 'Inline Harness Connector' on a multi-board schematic, splitting an existing harness connection into two.
65591	In a specific case, attempting to remove an entry connected to a harness on a multi-board schematic document would result in the error "Object reference not set to an instance of an object" being encountered.

Harness Design

61560	When placing a linear dimension between connection points on a layout drawing view placed in a Harness manufacturing drawing (*.HarDwf), the value used for the 'Value' field (the length of the dimension) is now automatically filled with the corresponding bundle length.
65236	In some cases after freely positioning/rotating designators and parameters in the layout drawing (with their 'Autoposition' option disabled), they would be rotated/moved after importing changes from the wiring diagram.
65344	In some cases when working with a harness design's wiring diagram, the error "EOleException: One or more errors occurred. (Object reference not set to an instance of an object.)" would be encountered.
65723	Added full support for using Harness Wiring Templates (in a harness wiring diagram) and Harness Layout Templates (in a harness layout drawing), both local and Workspace-based, using the commands available from the respective editor's main Design » Sheet Templates menu.

Platform

66056	The command to access the Storage Manager was not always available from the right-click context menu for project documents in the Projects panel.
66161	When configuring synchronization options between schematics and PCB in the Differences between dialog, the 'Update Same Kind in...' commands were no longer functional.

Data Management

56236	Where a reuse block placed on a schematic contained a component where a pin had been mapped to multiple footprint model pins (pads), the block was not transferred correctly from the schematic to the PCB.
65339	For a variant of a design using an alternate component, when attempting to update that alternate component to its latest revision, through the Item Manager, the wrong component (base, non-varied component) would be updated. (BC:21074, BC:22150)
65699	When editing a Workspace component as a user with view-only permissions, the Component editor will now always open, giving you the ability to access component details and make local edits, but with the inability to save/release any changes back to the connected Workspace.
65711	When using a control to rename an entity anywhere in the software (e.g., a project or one of its documents), a couple of improvements have been made to the subsequent Rename dialog. Firstly, clicking OK without making a change to the current name will behave as though having clicked the Cancel button. The error "<Name> already exists" will no longer be encountered. Secondly, you can now change the case of characters in a name (e.g., renaming from 'Myexamplepcb.PcbDoc' to 'MyExamplePCB.PcbDoc').
65894	After renaming a Workspace project's PCB document and at some later stage reverting back to a revision of the document prior to the renaming, a subsequent attempt to compare the local document against the head revision in the remote (Workspace's Git) repository, would result in the error "Cannot find the common ancestor..." being encountered and data being lost.
65914	Added a notification for any issues relating to the WebSocket notification channel, when connected to a Workspace. Note that this notification appears only if the EDMS.ConnectivityMonitor option (Advanced Settings) is disabled. When this option is enabled, Altium Designer just disconnects from the Workspace when there is no Internet connection.
66278	With a variant selected in the Projects panel it was not possible, from the project's ActiveBOM, to update an alternate part to its latest revision using the 'Operations » Update to the Latest Revision' command from the right-click context menu (BC:22498)

Import/Export

63453	When importing a specific Allegro design, the solder and paste masks were missing for a few pads in the generated PCB document. (Requires the Importer.Allegro.ReadPadLayers advanced settings option to be enabled).
65409	When importing an OrCAD design with the 'Convert Orcad Off-Page connectors as Altium Ports' option enabled, a bidirectional off-sheet connector would be incorrectly imported as an 'Unspecified' port.
65924	In some cases when importing an OrCAD design, port names were being placed incorrectly on a generated schematic document.
66015	When exporting a PCB into Ansys EDB format, resistor values specified in MOhm were being incorrectly exported in mOhm.

Circuit Simulation

65346

In some cases when working with the Mixed-signal Circuit Simulation feature, the error "EOleException: Could not find a part of the path "C:\ProgramData\Altium\Altium Designer {0E86C1C9-72CF-4BA0-A887-5B3AC0C1E1D4}\Extensions\Mixed Simulation\Library\SPICE models"" would be encountered.

SI Analyzer by Keysight

65544

The SI Analyzer was not considering the Solder Mask in its calculations, when the 'Use Solder Mask' option was enabled as part of the Transmission Line properties for the Layer Stack Manager, leading to an incorrect impedance value when compared to that returned by the Layer Stack Manager (simulated by the Simbeor software).

Version 25.7.1

Build: 20 Date: 11 June 2025

Schematic

64824	In some cases after updating an outdated component through the Item Manager, attempting to cross-probe to the reference part (using the 'Cross Probe - Reference Part' command from the ECO dialog's context menu), an Access Violation (in module "WorkspaceManager.DLL") would be encountered.
65693	After placing a port and connecting to a wire (with direction towards the wire), renaming the port with a lengthier name would result in the port auto-sizing to accommodate but extend it over the wire, breaking the electrical connection (becoming disconnected from the wire). (BC:22330)
65876	The position of cross-reference information associated to a port (positioned to the right or above the port) was not automatically adjusted when the port was resized. (BC:25532)

PCB

55542	When using the auto-save feature (Data Management - Backup page of Preferences) and setting the Path to a directory for which there is no permission to create folders/files, the error "STG: Access Denied..." would occur when attempting to backup the open PCB document.
60957	The Properties panel has been enhanced when working with various types of selected objects, to increase performance and optimize access to object properties, especially with larger designs.
64846	In a specific case, it was not possible to open a project's PCB document, freezing at the stage of "Rebuilding connectivity database...". (BC:24986)
65341	Greatly improved the reaction time when activating/deactivating layers, one after the other or a whole group, within the Layers & Colors tab of the View Configuration panel.
65620	Donut-shaped pads were not mirrored in PDF output when the "Mirror layers" option was enabled as part of print properties. (BC:25241)
65708	In some cases after executing the initial ECO to push a design to the PCB, some components were being placed far from the board's origin.
65738	For a specific panelized board, the annular rings for pads on certain Mid layers were not being displayed.

PCB CoDesign

65319	The shortcut to enable the PCB CoDesign panel's 'Show on PCB' option has been changed from Shift+A to Ctrl+Shift+A with this release.
65321	The 'Zoom selected object' option is now disabled in the PCB CoDesign panel by default.
65965	In some cases when running a comparison, the error "Cannot get the latest revision..." or "Cannot find the common ancestor..." would be encountered.

Constraint Manager

64579	In the Clearances view (accessed from schematic), a cell whose value had been previously loaded with a chosen constraint set would not clear that 'set entry' when either setting the value for the constraint set to 'None Selected' or entering a custom value, and then saving/closing/re-accessing the Constraint Manager.
65340	The Constraint Manager is now automatically refreshed with changes made to rules/classes on schematics when pushing changes from the schematic to the PCB (at the time the ECO dialog is accessed), without having to access the Constraint Manager and perform a refresh there. Note that if the Constraint Manager view is already open, this synchronization will only occur provided no unsaved changes have been made. (I:23779)
65362	It was not possible to define a custom xNet topology within the Constraint Manager when accessed from the PCB.
65488	It was possible to resize the bottom section of a view in the Constraint Manager too far, resulting in the content of the top area appearing 'invisible' and therefore not editable. (BC:25699)
65611	When defining constraints for a clearance rule, custom clearance values set for Inner/Outer Layers were not being reflected correctly (the min-max range) in the upper section of the Clearances view.

Draftsman

59671	When placing linear dimensions within a Draftsman document, the hardcoded tolerance between parallel line segments has now been reduced from 0.8 degrees to 0.08 degrees.
65625	For a specific PCB design, attempting to save its manufacturing drawing document (*.PCBDwf) after placing a drill drawing view, transmission line table or drill table, would result in the error "Value cannot be null. (Parameter 'key')" being encountered.

Harness Design

59312	On the Wiring Diagram, dragging wires that have visible parameters (but Autoposition disabled) would create splices at the original parameter-wire connection points that could not be removed with Undo. (BC:25759)
65059	For a design including one or more harness components with undesignated pins, attempting to place a layout drawing view into the harness manufacturing drawing document (*.HarDwf) would result in the error "Value cannot be null. (Parameter 'key')" being encountered.
65140	In some designs, after importing changes from a wiring diagram into the layout drawing, from/to information for wires and cables would be lost.
65337	For a specific harness design, even though Strip Length information was present for defined crimps in the wiring diagram and layout drawing, after importing to the project's Draftsman document, no information was present for the 'FromCrimpStripLength' and 'ToCrimpStripLength' columns in the wiring list. (BC:25491)
65612	In the wiring diagram, a placed wire (of type 'Standard (No BOM)') was still being presented in the BOM if it was connected through a wire break.
65613	A wire would appear multiple times in a wiring list (in the harness manufacturing drawing) if it was connected through a wire break to multiple parts of a multipart harness component.

Platform

65849

When using the 'Open All' or 'Open All Schematic Documents' commands, a message and progress bar are now displayed.

Data Management

63891	In some cases when working with the Component editor, the error "EInvalidAccessToObject: Object accessed after being destroyed. Adapter class: TModelChoiceAdapter" would be encountered.
63928	Added support for multi-select fields when creating a Jira task through Altium Designer. Now, you are presented with checkboxes with a warning to select at least one option to continue.
65203	Added the ability to work with multiple Workspace components as a 'group' (from the Projects panel), in terms of opening, closing, saving locally, saving to the connected Workspace, or discarding changes (closing without modification).
65226	When browsing components in the Explorer panel, data on the 'Preview' aspect view did not update/refresh when switching between components using the up/down arrows on the keyboard. (BC:24578)
65444	The 'Leave Feedback' link has been removed from the bottom of the Comments and Tasks panel.
65589	After using a command to remove a Managed Output Job from a project locally, it was not being removed from the connected Altium 365 Workspace's 'Versioned Storage' Git repository. On saving the project back to the Workspace, there was no 'scheduled deletion' option in the Save to Server dialog.
65632	Altium Designer would 'freeze' for several minutes when attempting to delete a large number of selected components in the Components panel. (BC:25114)
65803	Added support for using commenting and tasks features in a Multi-board Assembly document (*.MbaDoc).

Import/Export

63452	When importing a specific Allegro design, free text objects on the a silkscreen layer were missing.
64974	Added the ability to import more detailed pad stack information when importing an Allegro design, using the advanced settings option 'Importer.Allegro.ReadPadLayers'.
65504	In some cases, importing multiple Allegro library files (*.dra) at once would result in silent termination of Altium Designer, without any libraries being imported.
65626	When importing a specific xDX Designer design, bus entries were being imported incorrectly.
65867	When importing an Allegro design, if a polygon pour is less than 2500 sq.mil in size, its ‘Remove Islands Less Than’ option will automatically be disabled.

Version 25.6.2

Build: 33 Date: 14 May 2025

Schematic

47721	When opening Altium Designer after closing with a schematic still open in the previous session, holding the right-hand Ctrl key down during launch would result in an Access Violation (in module 'AdvSch.dll') being encountered.
59536	When opening any schematic document in a PCB design, the whole document was not made to optimally 'fit' within the extents of the design window by default.
64649	After using the Properties panel's Smart Edit Batch Replace feature for multiple selected string-based objects of the same type (e.g., ports, text strings, etc.) on a schematic, clicking away from the selected objects would incorrectly replace them all with the name of the first object in the selection (the name displayed in the Properties panel after the batch replace). (BC:24501)

PCB

61438	Added support for generating a list of nets and copper primitives that are intentionally allowed to short ('Net-Ties') when generating ODB++ V8.1 output
61957	In some cases when interactively routing to connect 'hanging' ends of a differential pair in 'Any Angle' mode, artifacts would be present in the design space and an Access Violation (in module 'RouterEntry.dll') could be encountered.
64430	With the PCB.EnableTraceCentering option enabled (Advanced Settings) and the 'Disable Trace Centering When Dragging' option enabled (on the PCB Editor - Interactive Routing page of Preferences), noticeable lagging/delay was experienced while sliding a diffpair (in HugNPush Obstacles mode) toward a cluster of other diffpairs.
64960	In some cases, component custom pad copper regions were being removed when interactively sliding associated track.
65225	The 'ODB++ v8.1 Intentional Shorts' feature, delivered by the ODB.IntentionalShorts option (Advanced Settings), is now officially made Public with this release (ON by default).
65270	In a specific design when applying teardrops, the straight Line style would be applied instead of the chosen Curved style.
65411	In some cases when interactively routing with all loop removal options enabled, a loop would be removed but associated vias would incorrectly remain. (BC:25286)
65422	In some cases when re-routing differential pairs in 'Line 45/90 With Arc' mode, an Access Violation (in module "ADVPCB.DLL") would be encountered. (BC:25260)
65462	After turning off the visibility of one or more objects for a PCB in Altium Designer, those objects were not being presented in the 2D PCB view, when viewing the board through the connected Workspace's browser-based Web Viewer. (BC:25196)
65528	When adding shielding to a net using µVias, µVias were being skipped (not placed) if they overlapped µVias in shielding on the opposite side of the board. (BC:23639)
65603	The 'Enhanced Layer Stack Report' feature, delivered by the PCB.ModernBoardStackGenerator option (Advanced Settings), is now officially made Public with this release (ON by default).
65633	After placing a dimension object on any layer other than the Top Layer, double-clicking on it and then pressing Esc, would result in its layer changing to the Top Layer.
65710	While viewing the properties for a board, deleting a grid and then clicking on the Properties button for the Grid Manager section, would result in an Access Violation (in module ‘ADVPCB.DLL') being encountered.
65761	After saving a PCB, restarting Altium Designer and reopening the PCB, the value for the Delay field (in the Net Information region of a selected track's properties) would no longer be calculated. (BC:25482)

PCB CoDesign

64798	Enhanced working with the differences and conflicts sections of the PCB CoDesign panel. In both sections, keyboard shortcuts are now available for traversing the list (Up Arrow/Down Arrow) and expanding/collapsing a section (Spacebar). In addition, and for the conflicts section, switching between Local/Remote is now possible using Left Arrow/Right Arrow.
65322	In the PCB CoDesign panel, when choosing whether to apply a local or remote change, you now have the ability to quickly set 'Local' or 'Remote' for all changes in a specific category. In addition, you can also quickly apply the desired setting to all currently selected change entries.

Constraint Manager

63370	Improved the way in which a Clearance rule is imported to the Clearance Matrix when migrating from the old design rules system for a project. When first and second scope expressions are set to 'All', the net scope / connective checking option (Different Nets Only/Same Net Only/Different Differential Pair/Same Differential Pair) is now taken into account.
64061	Added the ability to Undo/Redo changes made within the Constraint Manager.
64394	For a differential pair directive that is attached to a blanket, after syncing/importing with/to the Constraint Manager, it is now possible to toggle the display of diff pair class and associated rules information in the design space.
64489	Values for clearance rules in the All Rules view (accessed from PCB) were not synchronizing correctly with clearances specified by constraint sets (assigned to nets, net classes and rooms) in the Physical view.
65432	The units of measurement presented for new constraint changes in the ECO dialog did not follow the units of measurement defined for the PCB, when passing changes from schematic to PCB.

3D-MID Design

65276

Routing on a 3D substrate would become noticeably slower after enabling the alignment grid (and remain so after disabling it again).

Harness Design

61029

For a specific harness design featuring wire breaks and splices, validating the project would result in erroneous duplicate designator and orphaned wire violations. (BC:24832)

63103

Added a new advanced settings option 'HarnessDesign.Embed3DModel' that, when enabled, embeds 3D models (Parasolid format) in the layout drawing document. Each 3D model is created when adding a Physical View for a harness component or connection point. Any missing 3D models (existing but not embedded) will be embedded after saving the layout drawing. This feature facilitates improved integration when using Altium MCAD CoDesigner with harness design projects.

Platform

65204	The 'Purchased' tab of the Extensions and Updates view has been renamed to 'Available', to better reflect that this tab presents additional functionality and features (delivered by extensions) that are available to you, but have not yet been installed. Similarly, the option 'Purchased but not installed' has been renamed to 'Available but not installed'. Note that while all extensions can be installed, some functionality may require additional purchase/licensing to fully use.
65306	Updated the link text - from 'Learn More' to 'Contact Us to Discuss Your Options' - in warning messages that appear in, for example, the License Management UI for perpetual licensing whose subscription is expiring (or has expired). To reiterate, subscription renewals are no longer available for perpetual licenses. After expiration, a perpetual license can still be used, but you won't have access to later updates for Altium Designer beyond that point (no new features/functionality), nor will you have access to cloud capabilities delivered through, and by, the Altium 365 platform.
65309	Perpetual licenses, irrespective of their subscription state, are now always displayed on the License Management view and are no longer hidden when the 'Hide Expired Licenses' option is enabled.
65314	In some cases when connecting to an Altium 365 Workspace, the error "System.ServiceModel.Security.SecurityNegotiationException: Could not establish trust relationship for the SSL/TLS secure channel with authority..." would be encountered.
65315	In some cases when connecting to an Altium 365 Workspace, the error "System.ServiceModel.CommunicationException: The SSL connection could not be established, see inner exception..." would be encountered.

Data Management

59692	The number of characters that can be entered into a standard comment and task is now limited to 2000. In addition, and when posting/replying to a Jira-related comment, the number of characters has been extended to 20,000.
63220	In some cases when working with comments, the error "EOleException: Object reference not set to an instance of an object" would be encountered.
65082	When editing an existing Workspace component in the Component editor (in its Single Component Editing mode), it was not possible to save changes back to the Workspace if the editor had been opened in a separate window.
65130	In some cases when connecting to an Altium On-Prem Enterprise Server whose session has expired, "401/unauthenticated" errors would be encountered. As a result, any opened projects (from the Enterprise Server) were not getting refreshed correctly with respect to showing which collaborators were actively reading/editing documents.
65155	In some cases when saving a part from the Manufacturer Part Search panel to a connected Workspace, changing the parameter mapping of a unit-aware parameter to something that is not correct unit-wise, would result in Altium Designer silently crashing without message or warning. (BC:25341)
65160	In some cases when working with the ActiveBOM, the error "ERangeError: Range check error" would be encountered.
65208	When using the Project Releaser and generating assembly data for a variant of a design containing a component with a specified alternative part, the 'Children' aspect view of the released Assembly item (as viewed through the Explorer panel) was incorrectly including the main component (in addition to the alternative part).
65338	Using the Item Manager, it was not possible to update to the latest revision of an alternate Workspace component used in a variant of a design. The ECO would always fail to execute. (BC:24393)
65398	With local file locking applied ('Enable File Locking' option enabled on the Data Management - File Locking page of Preferences), attempting to save changes to an existing Workspace component from the Component Editor resulted in a catastrophic failure "The process cannot access the file because it is being used by another process" being encountered. (BC:25017)

Import/Export

63510	After importing a specific xDX Designer design, its Title page was missing a logo image and associated template information (containing title block, zone information, etc.).
64093	When importing a specific xDX Designer design, power ports were being imported incorrectly.
64161	After importing a specific xDX Designer design, it was not possible to resolve "Missing Harness Type on Signal Harness" validation errors.
64211	For a specific Allegro design, after importing and generating a PCBLib from the PCB, updating particular placed components from that library would result in their footprints becoming rotated by 180 Degrees, causing short circuits.
64645	When importing an xDX Designer design, a new option has been added that allows you to import 'off-page' connectors in the source design as ports on the generated schematic documents, rather than default off-sheet connectors.
65132	When importing an Allegro design and library, the generated PCB used the center of each footprint as the origin, while the generated library used the center of a footprint's pin 1 as the origin. When using the 'Update From Libraries' command, components would be incorrectly positioned as a result.
65253	For a specific xDX Designer design, sub-parts of a multi-part component were missing after import.

Version 25.5.2

Build: 35 Date: 16 April 2025

Schematic

50893	The use of the left square bracket character ([) in a text string was not being evaluated correctly in a text string placed on the schematic. (BC:18861)
64732	In some cases in a multi-channel design, with the 'Ports' option enabled in the 'Compiled Names Expansion' region of the Schematic - Compiler page of Preferences and the 'AutoSize' option enabled for a placed port, the size of the port would change after switching to the compiled schematic (physical) tab and back to the Editor (logical) tab.
64869	For a selected graphic image on a schematic sheet and with the 'X:Y Ratio' option enabled in the Properties panel, changes to the image’s width or height from within the panel were not being automatically detected, resulting in the aspect ratio not being kept 1:1. (BC:24890)
65330	The feature to provide a clear display of text and other drawing objects that overlap a graphic image when generating a PDF from your schematics, delivered by the Schematic.ExportPDF.UseBitmapTransparency option, and the 'Auto-addition of Supply Nets Rule' feature, delivered by the Schematic.AutoGenerateSupplyNetsRule option (Advanced Settings), are now officially made Public with this release (both ON by default).
65352	For a specific PCB design project, attempting to select multiple objects on a schematic when the Properties panel was open, would result in the error "Exception has been thrown by the target of an invocation..." being encountered. (BC:25148)

PCB

56173	In some cases, an Access Violation (at address 00007FFBBD5E84DE in module "Altium.PCB.DataModel.X.dll") would be encountered.
61497	Added an Advanced Settings option (PCB.DRC.OnlineOptimization) that when enabled, optimizes Online DRC processing.
64117	In some cases when applying teardrops, the straight Line style would be applied instead of the chosen Curved style. (BC:24557)
64138	In the specific case of a large design, via selection and panning within the design space were considerably slow, with moments of severe 'lag' being experienced.
64462	The Applicable Binary Rules dialog now shows the relevant net classes applicable to a clearance constraint, as configured in the Constraint Manager, in the form "<NetClass> to <NetClass>".
64719	A PCB layer mismatch would result when copying-pasting vias/pads between PCB-to-PCB (and where signal layers have been moved in the target PCB layer stack) or between PCBLib-to-PCB (and where signal layers have been moved in the source PCBLib layer stack). Data for the pasted vias/pads was not respecting the layer stack configured in the source document in each case. (BC:20707)
64752	Net information (Length and Delay) is now stored with the PCB document, allowing for better performance when opening the PCB and when accessing information through the Properties panel and heads-up display.
64964	When exporting a PCB document to STEP 3D format, if the PCB includes a Route Tool Path layer with zero-width arcs placed on it, an Access Violation (at address 00000001A1E10BBC in module 'OUT_ExportStep.dll') would be encountered. (BC:24989)
65058	With the 'Allow variation for paste mask' option enabled for a project variant, custom-shaped pads for a 'Not Fitted' component were still being included in Gerber output for the paste layer. (BC:25007)
65106	In some cases when switching active document to the PCB, an Access Violation (at address 0000000178B71550 in module "ADVPCB.DLL") would be encountered.
65151	In a specific case while interactively routing with the Auto Shrinking option enabled, a trace would not shrink to its minimum allowed width (per applicable constraint) when passing between BGA pads. (BC:25143)
65366	The 3D preview for a component footprint would not be visible (e.g., in Schematic Library editor, PCB Model dialog, Components panel) if that footprint contained a bond wire primitive.
65439	When exporting a single layer PCB to Parasolid format, with Copper Export Options set to 'Export All' or 'Export Copper Only', the error "Item not found" would be encountered and Altium Designer would terminate.
65466	In some cases when placing vias from a Pad/Via Template library, the error "COM object that has been separated from its underlying RCW cannot be used" would be encountered.
65483	With the 'PCB.SingleLayerStack.Support' option enabled (Advanced Settings), signal/plane layers were getting renamed 'Top Side'/'Bottom Side' when moving a signal/plane layer down/up within the Layer Stack Manager.

PCB CoDesign

63798

In a specific case, after changing the layer for a component with wire bonding in one PCB instance, when that change was merged into another PCB instance, one of the bond wires was not attached to that component's corresponding die pad.

Constraint Manager

60767	In some cases and with the Constraint Manager accessed from the schematic, it was not possible to set a 'Tolerance' or 'Matching Target' value for specific xSignal classes.
63736	Introduced the notion of an 'xNet diff pair', an element that exists only within the Constraint Manager. With this feature, you now have the ability to create diff pairs from xNets, from within the Physical view or the Diff Pairs tab of the Electrical view of the Constraint Manager (when accessed from either a schematic or PCB).
64743	In some cases when working with the Constraint Manager, the error "System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection. (Parameter "index")" would be encountered.
64875	Added support for exporting/importing Advanced Rules (when accessing the Constraint Manager from the PCB). When imported, associated custom scopes are applied automatically. (Delivers on point 2 of I:22944)
64876	Added a warning to the ECO dialog for the situation where scopes of some classes have changed but are unsynchronized between the source schematics and the Constraint Manager.
64904	New and unique icons have been implemented to distinguish the Constraint Manager when accessed from the schematic and PCB respectively.
64930	With the Constraint Manager open on both sides (schematic and PCB), constraint data changes on one side were not apparent after pushing changes from the other side (through an ECO) and it was not possible to synchronize manually (the Refresh button was disabled). A similar situation also arose when the Constraint Manager was open (from the PCB) and a new clearance rule was being created from the Polygon Pour Manager (in the PCB editor). The new rule was not apparent and, again, the Refresh button was disabled.
64940	When pushing changes to the PCB, the ECO dialog would incorrectly keep including an entry for changes to the clearance matrix (scopes), when no changes had been actually made.
65171	Added 'Expand All' and 'Collapse All' commands to the right-click context menu for an xSignal Class, on the xSignals tab of the Electrical view.

Draftsman

64149	When changing the source for a PCB design's manufacturing drawing document (PCBDwf) from the PCB to the panelized PCB, the error "Object reference not set to an instance of an object" would be encountered.
65305	The list of document parameters is now sorted by default (by Name).

Wire Bonding

63354	Not all bond wires were being displayed when viewing the PCB through Altium 365's Web Viewer interface.
64929	With a PCB in 3D View mode, attempting to select any bond wires would result in the wires not being highlighted immediately, instead requiring a pan or zoom action first.
64941	The 'Wire Bonding' feature, delivered by the PCB.Wirebonding option (Advanced Settings), is now officially made Public with this release (ON by default).
64970	With a PCB in 3D view, after moving a component (with a footprint featuring wire bonding) an additional (and long) bond wire would suddenly appear in the design space.

Multi-board Design

64714	After selecting multiple connections on a multi-board schematic, attempting to cross-probe to the multi-board assembly document would result in the error "Object reference not set to an instance of an object" being encountered.
64766	Where a rotated image has been added to a multi-board schematic and the project saved to a connected Workspace, that image was incorrectly displayed (as not being rotated) through the Workspace's Web Viewer.
64886	The 'Support for External Peripherals/Components' feature, delivered by the MBS.PlacePart and MBS.UseGeometryMaker options (Advanced Settings), is now officially made Public with this release (both options are ON by default).

Harness Design

61279	Added, for the harness covering object, the ability to define Start/End offsets. Using these offsets, in conjunction with the bundle length (segment enclosed), the actual covering length is then calculated, for display in the main design space and the BOM. (I:25002)
62453	Added import of layout drawing document parameters into the associated harness manufacturing drawing document (HarDwf), including calculated parameter values such as '=ItemRevision' and '=ItemRevisionLevel1'. (I:24175)
63923	With the 'Enable Auto Pan' option disabled on the Schematic - Graphical Editing page of the preferences, placing a cable component onto the wiring diagram from a connected Workspace, using the Place command on the Components panel's right-click context menu, resulted in the component being incorrectly placed as a single harness component, rather than separate harness objects.
64077	Harness covering objects were being ignored when running one of the Layout Drawing editor's automated annotation commands (e.g., 'Annotate Harness Layout Drawings Quietly').
64265	Added the ability to define 'Strip Length' and 'Pull Off Length' termination parameters for a 'no connect' object.
64631	In some cases when using the cross-probing functionality in a harness wiring diagram, the error "EOleException: The method or operation is not implemented" would be encountered.

Platform

55153

After choosing a license to use from the License Management view, if network connection was subsequently lost, trying to refresh the view or release the license would result in a hard crash of Altium Designer.

65316

With the Microsoft Windows 'Beta: Use Unicode UTF-8 for worldwide language support' option enabled in the Region Settings dialog, Altium Designer would encounter the start-up error "Load file error: The type initializer for 'Altium.Sch.DataModel.Serialization.Types.StrUtils' threw an exception". Once running, attempting to access any schematic would result in the document opening 'empty', with the error "Failed to load project: Value cannot be null. (Parameter 'encoding')" presented in the Messages panel. (BC:25239)

Data Management

58076	In some cases, loading the footprints of a chosen PCBLib in the Components panel would take a considerable time, with an information dialog ("Please wait a moment...") repeatedly appearing. (BC:21992)
63236	When placing a comment on an applicable document and assigning it as a task, posting it and then resolving it while it was still processing, would result in the error "The HTTP status code of the response was not expected (500)..." being encountered.
63633	In some cases when working with comments, the error "Altium.Services.Comments.Client.ApiException: The HTTP status code of the response was not expected (502)..." would be encountered.
63991	Searching for a component through the Components panel would send too many search requests to the connected Workspace, impacting performance.
64073	When using the BOM CoDesign feature, the Related BOMs section (on the Related BOMs tab of the Properties panel, when accessed from the ActiveBOM document) is now resizable.
64074	When using the BOM CoDesign feature, the 'Show More' control (associated with the Details section, on the Related BOMs tab of the Properties panel) is no longer presented if the full text is already displayed.
64591	When creating a new component without use of a component template, it was not possible to change the component's Id.
64634	In some cases when working with comments, the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered.
64763	Added the ability to preview compressed ODB++ data, generated as part of release preparation using the Project Releaser.
64775	Attempting to search for a component using the Components panel and including a comma in the search string, would fail to return that component in the search results. (BC:21907)
64778	Where a project was shared with a user/group whose name was very long, the 'Copy Link' control in the Share dialog would disappear. (BC:23411)
64779	When migrating a PCB design project including a LibPkg file, from an external Git repository to a connected Altium 365 Workspace's internal Git repository, the migration process would fail, resulting in missing files and data loss.
64815	In a specific case and when trying to add a part choice during creation of a new Workspace component, the error "Object reference not set to an instance of an object" would be encountered.
64844	For a displayed VCS Revision in the Storage Manager panel, any comment included at the time of commit no longer presents with an extra, redundant line.
64915	In some cases when attempting to update a project with the latest revision in the connected Workspace, the error "System.ArgumentException: An item with the same key has already been added" would be encountered.
64978	When processing an operation involving a design project in a Git repository, the 'Overall Progress' dialog now appears without adding an additional 'Altium Designer' icon to the Windows Taskbar.
65019	It was not possible to access the 'Project View' for any chosen project in the Explorer panel. (BC:25059)
65105	When using the BOM CoDesign feature and comparing a design project's ActiveBOM with a chosen Related BOM, the DesignItemId is no longer displayed in the Differences section (within the Related BOMs tab of the Properties panel).
65111	When a specific document in a Workspace project has conflicts, the 'Conflict Detected' pop-up now shows the author and timestamp of the user who last modified that document, rather than the user who last committed the project to the connected Workspace.
65125	When attempting to save a design to a connected Workspace and the design includes documents in the 'Ahead of server' state only, these documents are now pushed to the Workspace (instead of committed and pushed), ensuring no 'empty commits' (commits with no real changes).
65511	The 'Part requests' folder is now visible again in the Explorer panel, irrespective of whether access to managed process workflows functionality is available or not. Note that this reverts the functionality implemented by '#64072' in Altium Designer 25.4.

Import/Export

61046	When importing a specific xDX Designer design, ports and power ports were positioned incorrectly on a generated schematic document.
65013	The Xpedition Importer now adds the correct offset when importing an Xpedition design, so that the full design is available for editing in Altium Designer.
65080	For a specific design exported to Ansys EDB (direct or using Ansys CoDesigner), custom-shaped pads in component footprints were being incorrectly exported (flipped vertically) when viewed in Ansys Electronics Desktop.
65162	Added support for the import of essential thermal reliefs (defined in the Allegro Constraint Manager) when importing an Allegro design, facilitating better connection assignment.

Version 25.4.2

Build: 15 Date: 13 March 2025

Schematic

53367	Minor update to the graphics for a device sheet symbol that employs the 'Repeat' keyword (in a multi-channel design). The set of stacked device sheet symbols are now drawn with rounded corners.
57373	Concatenation of special strings with numeric (integer) values would result in unexpected arithmetic operations and ultimately an incorrect overall string being presented. A note has been added to the documentation to clarify that such a parameter value must be placed in single quotes, thereby preventing it from being interpreted as a number and excluding it from any arithmetic operation. (BC:14889)
64110	After using the Alt+click shortcut over a net object (to select that object and to highlight all objects associated to that net across all sheets of the active design project), all other objects on the schematic would remain in a greyed-out state, with no way to clear the highlighting, save for restarting Altium Designer. (BC:24098)
64347	In some cases when working with the Properties panel for a schematic document, the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered.
64443	Added visibility of dynamic parameters in the Properties panel for a placed (and selected) component on a schematic, using a combination of two advanced settings options - 'Schematic.UI.ShowMoreOrLessParameters' and 'Schematic.ForceLoadDynamicParametersInIPP'.
64445	For a component parameter whose value includes one or more concatenated special strings, display of the value in a chosen variant would change from real value to "#NAME?" when the component variation was toggled from 'Fitted' to 'Not Fitted' in the Variant Management dialog. (BC:24472)
64549	The 'Report Project Hierarchy' command (on the Schematic editor's main Reports menu) was not functional and did not generate a .rep file, as expected.

PCB

64053	After creating a single layer PCB and placing a layer stack table in the design space, the signal layer would disappear from the table after closing and reopening the PCB document.
64300	For a Rigid-Flex PCB with multiple Flex sub stacks, one on top of another (e.g. Flex Top stack above Flex Bottom stack), the routing width for the Flex Top stack region was not following the applicable design rule value. Instead, the Rigid stack routing width rule value was being used. (BC:23279)
64313	For a specific design, Altium Designer would freeze when attempting to move/drag a particular track.
64567	With the option 'Remove Net Antennas' enabled (PCB Editor - Interactive Routing preferences), net antennas were not being removed as part of the automatic trace loop removal feature. (BC:24867)
64584	Backdrills were being ignored when interactively routing, leading to clearance violations with backdrill vias.
64676	For a specific and large RF design, interactive routing performance was found to be considerably slow.
64699	When exporting a design to DXF format, the paste mask was missing for any pad set to use a predefined or custom shape.
64707	For a specific design with complex outline and large number of cutouts, routing performance was very slow.
64771	In some PCB designs and using the Interactive Router in its 'Follow Mode', track being routed would not actually follow the contour of the board.
64922	It was not possible to access the Edit Room Definition dialog for a placed room, either by double-clicking on the room or by using the Properties command on the associated right-click context menu.
65016	In a specific case and when starting to interactively route a diff pair, an Access Violation (at address 00007FFA06D76588 in module 'RouterEntry.dll') would be encountered.

PCB CoDesign

64624	After a merge failure an error was being encountered, rather than changes being rolled-back and the document being returned to its pre-merge state.
64745	After reverting a merge the document is left in the 'Merged' state, rather than changes being rolled-back and the document being returned to the 'Locally modified' state.

Constraint Manager

63914	For a specific design project, accessing the Constraint Manager from the PCB would take a long time and switching to the Physical view would take far longer still.
64336	The schematic constraints document (Constraints.xml) is now added to the project (on first save of the Constraint Manager) and made available through the Projects panel (in the Settings/Constraints sub-folder). In addition, constraints data in the document is reloaded/refreshed after updating the project from the connected Workspace.
64396	For a PCB design that showed no differences when performing an update to the PCB or running the Differences report output from an OutJob, the Differences report would incorrectly fail during the validation stage of the release process (when using the Project Releaser), flagging changes existing in constraints.
64464	Values for clearance between diff pairs and the gap between sides within a diff pair were incorrect in the Applicable Binary Rules dialog, compared with the values in the Constraint Manager.
64465	For a parameter set directive including a defined net class, after syncing/importing with/to the Constraint Manager, it is now possible to rename the net class from the Properties panel, when the directive is selected on the schematic.
64537	The 'Graphical Custom Topology view' feature, delivered by the ConstraintManager.TopologyGraphAvailable option and the 'Migrate Project to Constraint Manager Flow' feature, delivered by the ConstraintManager.ProjectMigrationWizard option (Advanced Settings), are now officially made Public with this release (both ON by default).
64592	Added support for the auto-creation of custom topologies for xNets that traverse discrete elements with more than 2 pins (e.g., a bank of resistors in a single part).

Draftsman

64359

When specifying the Units and Dual Units for a Draftsman-based document (as part of Document Options in the Properties panel), the entries in the corresponding drop-down menus are now presented in short form (e.g., 'cm' instead of 'Centimeters').

Wire Bonding

64122	Where a diff pair was being routed to a die that uses bond wires, the bond wires were violating the applicable diff pair routing rule (for width).
64301	For a wire bonding component placed within a cavity on an internal layer, die pads and bond wires were not rendering correctly ('floating in air') when viewing the PCB in 3D.

Harness Design

64264	When configuring cavities, values for 'Strip Length' and 'Pull Off Length' can now be defined for rows where no cavity type has been specified.
64324	Parameters defined for cavity parts and associated parts were not being propagated to the ActiveBOM document. (BC:24438)
64358	After changing the units for a HarDwf document at the document level (Document Options), the chosen units were reflected in the Length Units field for a selected wiring list, but the values were not being updated in the Length column.
64989	In a specific case, removing a particular harness covering from a harness design's layout drawing document resulted in the error "Index was out of range. Must be non-negative and less than the size of the collection..." being encountered.

Platform

63612	In some cases when working within an OutputJob document, an Access Violation (at address 000000014101CB39 in module "WorkspaceManager.DLL") would be encountered.
64262	In some cases when first starting Altium Designer, the vertical scrollbar for the Projects panel was not being drawn correctly and could not be accessed/used until after collapsing/expanding some entry in the panel itself.
64594	The 'Harness & Multi-board View Only Mode' feature, delivered by the System.ViewOnlyMode.Support option (Advanced Settings), is now officially made Public with this release (ON by default).
64595	After placing a TActionList component and drawing the required button on a script Form, attempting to access the ActionList Editor would result in an Access Violation (in module 'EditScript.DLL') being encountered.

Data Management

57403	After editing and releasing multiple components (from the Component editor in its Batch Component Editing mode), the data was not being refreshed automatically in the Explorer panel.
61385	In some cases for multi-channel designs using managed sheets, the Project Releaser would ignore applied Board Level Annotation, resulting in generation of a BOM with incorrect designators.
63784	When creating a comment for an alternative item in an ActiveBOM, the comment window would open partially off-screen and also appear with the header 'Row was removed'.
63851	After choosing a replacement alternate component for a component entry in a defined variant, the parameters were not being directly updated to those of that newly-chosen replacement. (BC:24598)
64072	In the Explorer panel, the 'Part requests' folder is now hidden if access to managed process workflows functionality is available.
64114	With multiple users working on a project in an Altium On-Prem Enterprise Server under SVN control, after one user migrates the project to the Server's built-in Git repository, another user, using the 'Update from Server' control (and subsequent 'Update local project folder' option), would encounter the error "Failed to update local project".
64173	When defining a Harness Wiring model (for a Harness Wiring component), attempting to 'Add Supplier Link And Parameters to Component' from an SPN tile of a chosen part in the Manufacturer Part Search panel, would cause Altium Designer to freeze. (BC:24737)
64227	When creating a new item through the Explorer panel, the Create New Item dialog's Revision ID field would present the ID using the revision naming scheme manually chosen for the last created item of that type, instead of the correct ID based on the item's actual default naming scheme.
64363	When saving a new component to a connected Workspace (with the Component editor in its Single Component Editing mode), the release would fail if a release note was entered of more than 255 characters. (BC:24819)
64381	For a defined project template in a connected Workspace whose Item Naming for project release uses custom project and variant parameters, release of a new project created from that template would result in generated data sets (Source, Fabrication, Assembly, Custom) not obeying that defined naming. Several custom parameters were being replaced with built-in parameters or removed entirely.
64431	The 'Save to Server' command was not available on the context menu associated with the VCS status icon, for the project document entry in the Projects panel.
64659	In some cases, SiliconExpert data in an Excel BOM exported from a Project's ActiveBOM, was not the same as the original data in the ActiveBOM itself.
64765	In some cases and for a very large project with a considerable number of documents, it would take a very long time to update the VCS status of the project.
64961	Placing a managed schematic sheet onto a schematic in a Workspace project and saving the project to the Workspace would result in incorrect operation of VCS statuses in the Projects panel, with the status for some documents stuck at 'refreshing'.

Import/Export

63627	When importing a specific xDX Designer design, a multi-part component was incorrectly being imported as separate parts.
63664	Added the ability to quickly toggle the inclusion state of multiple selected layers on the 'Current User Layer Mappings' page, when importing a Mentor Xpedition design.
64160	When importing an xDX Designer design, bus entries were being imported incorrectly on the generated schematic document(s).
64497	When attempting to export a rigid-flex design to STEP 3D or PARASOLID format and the design included routing tool path primitives, export would fail if, in the Export Options dialog, the 'Export Folded Board - Rate' slider was set to anything other than 0%. (BC:24858)
64531	Enhanced the progress indicator to better reflect the actual progress when importing a Mentor Xpedition design.
64586	Disabled unnecessary processing to significantly improve performance when importing a Mentor Xpedition design.

Power Analyzer by Keysight

64355	Surface layers were incorrectly being included into the internal layer max. current density simulation, causing the specified limit to be exceeded and the analysis to therefore fail.
64485	It was not possible to see all Pin Loads in the Load Properties dialog, as there was no ability to scale the dialog or scroll the listing.
64552	If more than 32 loads were configured for a single source, the error "Exception has been thrown by the target of an invocation. ---> System.InvalidOperationException: Sequence contains no elements" would be encountered.
64553	When viewing the details for any network in an analysis report, the value presented for the 'Power Consumption for This Network' field was always displayed as "0 Watts", instead of the actual power consumption.
64554	When viewing an analysis report, the value for 'Max Via Current Density' (in the Global Settings section) and 'Max Current Density' (in the Failed Via Summary) was always displayed as "0 A/mm^2", instead of the value defined in the configuration.
64555	When configuring the load properties for a load component, Altium Designer would freeze if the Total Load Current was set lower than the Pin Load Current.
64709	If a layer was renamed for a board in the Layer Stack Manager, an error would be encountered when next attempting to open the design's associated Power Analyzer Keysight document (<ProjectName>.pdnaK).

Version 25.3.3 HotFix

Build: 18 Date: 17 February 2025

Schematic

59658	In some cases, junctions would disappear from a schematic. (BC:22687)
62926	A junction would disappear when moving a component across to the other side of that junction.
63185	In some cases when moving a component, the feature to show a visual indication of auto-junction connectivity would falsely display a tick when a short would be created, instead of an error. Note that the feature will now work exactly the same as it did in the past and known issues will be resolved in a future update. (BC:19438)
63718	It was no longer possible to reference a local folder of documents using the HelpURL parameter.
63722	After toggling the 'Fitted / Not Fitted' state of a component on the compiled tab of a schematic sheet, the project was not being marked as 'modified'. (BC:24535)
63843	In some cases with a compiled tab active on a schematic and switching to the PCB, selecting a component and then switching the active variant would result in the properties becoming empty.
63972	In some cases when opening a schematic document residing along a directory path ending with the '.' character, the error "System.AggregateException: One or more errors occurred. (Error reading the C:\Altium\git\ExamplePath\. directory..." would be encountered.

PCB

60875	For a specific design exported to Ansys EDB (direct or using Ansys CoDesigner), the component pin assignment for 3 chokes in the design were incorrect when viewed in Ansys Electronics Desktop.
62769	Export of board data to ODB++ v8.1 format now includes components that have been placed on a mid layer. (I:24432)
63926	For a specific design, attempting to export the PCB to Ansys EDB format resulted in the error "Cannot create component".
63960	After configuring a keyboard shortcut to access the Selection Filter, using that shortcut would open the filter in an area where most of its controls could not be seen/accessed.
64014	Added support for generating and placing QR and Data Matrix codes into a PCB design. (I:895)
64017	The 'User-defined Footprint Parameters' feature, delivered by the PCB.FootprintParameters option (Advanced Settings), is now officially made Public with this release (ON by default).
64154	When using the 'PadIsPlated' query language keyword (without Boolean qualifier) in an expression in the PCB Filter panel, objects other than plated thru-hole pads were also returned. (BC:24473)
64191	The 'Improved ODB++ Support' functionality, delivered by the ODB.Improvement option (Advanced Settings), is now officially made Public with this release (ON by default).
64390	For a design reuse block that includes a component with a custom-shaped pad connected to a net, after placing the reuse block on a schematic and pushing changes through to the PCB, attempting to drag the component into position would result in an Access Violation (at address 0000000194A9C17F in module 'ADVPCB.DLL') being encountered. (BC:24784)

PCB CoDesign

63963	It is now possible to select individual, multiple or all modification entries within any comparison category on the PCB CoDesign panel.
64104	In a specific case, changing one rule in the Physical view of the Constraint Manager resulted in more than 70K rule changes in the PCB CoDesign panel, making it impossible to keep working with Altium Designer due to the lengthy processing time of so many changes.
64113	In a specific case, detected changes to via types in the Layer Stack Manager were not being merged correctly, resulting in repeated changes being flagged in the PCB CoDesign panel.

Constraint Manager

61930	Polygonal-shaped rooms were being reset to become rectangular in shape after saving the Constraint Manager when accessed from the PCB (irrespective of whether changes were made to a room's definition or not). (BC:24592, BC:24641)
62928	After assigning a constraint set to a net class or diff pair class (in the Physical or Electrical views) and saving-closing-reopening, that assignment was not being saved.
62999	Clicking the 'New Clearance Rule' and 'New Connect Style' buttons (Polygon Pour Manager dialog) and the 'Create new clearance rule' button (Add Stitching to Net dialog) now create applicable advanced rules in the Constraint Manager. Note that the Constraint Manager is not automatically opened as part of this creation.
63075	When browsing the applicable binary rules between a net and a diff pair (members of respective classes), the Applicable Binary Rules window showed only the default Clearance rule and not correct query scoping for the Net Class and Diff Pair Class.
63121	Added horizontal auto-scrolling (where appropriate) in the bottom section of the Constraint Manager, when selecting multiple entities in, for example, rows of a table.
63242	Width constraints of nets and net classes are now validated in the top grid of the Physical view and highlighted using red text if values are found to be invalid.
63385	Defined Clearance rules in parameter set directives were being ignored by the Constraint Manager's 'Import from Directives' feature.
63656	After migration from the old rules system to the Constraint Manager, basic clearance rules (Net Class to Net Class, Net Class to All Differential Pairs, Net Class to All, Diff Pair Class to Diff Pair Class, Diff Pair Class to Net Class, Diff Pair Class to All Differential Pairs, Diff Pair Class to All) were incorrectly brought in as Advanced Rules, rather than into the Clearance Matrix.
63783	When using the context menu to copy and paste data between cells in the Constraint Manager's Physical view, the pasted data would be in XML format.
63814	After importing a constraint set, it was not available for use until after saving and reopening the Constraint Manager.
63958	It was not possible to create the same xNet once it had been removed.
64063	For a specific design, attempting to push changes from PCB to schematic through an ECO resulted in failure, with all nets showing "Net with name "<NetName>" doesn't exists".
64656	In some cases when working with the Constraint Manager, the error "System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection..." would be encountered.
64807	In some cases, changing between views or expanding sections within the scope area (e.g. a net class) would take a considerable length of time.

Wire Bonding

63868

In a specific case, moving a track to which a bond wire was connected caused the bond wire to break in two and its direction become reversed. (BC:24661)

Multi-board Design

63671

Where a multi-board schematic document featured multiple connectors and connections (of any type) between modules, there was very noticeable performance lag when attempting to move modules/connections.

Harness Design

58543	If a crimp component assigned to pins of a harness connector had no referenced symbol, the values for its defined parameters were not being displayed in the ActiveBOM. (BC:23079)
59685	The units defined for a harness manufacturing document (HarDwf) were not being applied to wires that were not part of a cable, in a placed wiring list and connection table.
61278	Added the ability to specify desired units for use with element lengths in the Wiring Diagram and Layout Drawing of a harness design. Supported units are: mm, cm, m, in, and ft, and can be specified at both the preferences (on a new 'Harness Design - General' page) and document level. In addition, and also part of the same new preferences page, you now have the ability to specify the 'Default Blank Sheet Size', used when creating a new wiring diagram or layout drawing document. (BC:23900, I:20186, I:23688)
61557	Standardized the list of units for use in a harness manufacturing document (HarDwf). Supported units are: mm, cm, m, in, ft, and mils. In addition, Length Units can be specified for a BOM table, connection table and wiring list (overriding units specified at the document level).
63938	In some cases when working with a harness design, the error "EOleException: Object reference not set to an instance of an object" would be encountered.
63955	Added the ability to display only 'no connect' objects in a connection table within a harness manufacturing document (HarDwf).
63974	A wire break associated to a white wire was white without a border color, making it invisible on a printed document.
64109	Where a Layout Drawing contained many harness coverings, opening the project's HarDwf document would take a long time. In addition, generation of PDF output through an OutJob would be very slow and the resulting file size considerably larger.

Data Management

62956	When the connected Workspace was changed during configuration of a CmpSync document, the subsequent error message incorrectly advised connection to the currently connected Workspace, instead of the previous Workspace.
63001	With the Component editor in 'Batch Component Editing' mode, you now have the ability to quickly set ranking for part choices automatically for any or all components, while keeping the order for any part choices already ranked.
63040	Improved login to an external Git repository. Now if you enter the incorrect credentials, Altium Designer will not attempt to login using those for your Altium On-Prem Enterprise Server. A login window will now appear with which to check and re-enter the correct credentials for your external repository.
63893	In some cases when browsing component part choices through the Components and Explorer panels, a "System.InvalidCastException: Unable to cast object..." error would be encountered.
63956	When comparing the ActiveBOM with a selected Managed BOM using the BOM CoDesign feature, if the alternates for a component are the same but only ordering of Part Choices was updated, such modifications are ignored and not listed in the Differences section.
63965	It was not possible to create a local project in a network folder location. An "Invalid project location" error would be encountered.
64057	When creating a new component in a connected Workspace with 'Standard' level of feature access, it was not possible to edit the Id for the component.
64209	When changing the lifecycle state of a component, the software now checks that its referenced models are in an applicable state to do so.
64303	In a specific case, attempting to open a design's ActiveBOM document would result in the error "Arithmetic operation resulted in an overflow..." being encountered.
64892	Returned the ability to Commit and Release projects that use SVN for version control in a connected Enterprise Server, where that Server still supports internal SVN repositories.

Import/Export

62273	When importing a specific Allegro design, width-related rules were being imported with incorrect values.
63364	When importing a specific Allegro design, an object of type 'mechanical component' was not being imported on the generated PCB document.

Power Analyzer by Keysight

63959	In some cases, vias were being reported as "not being able to withstand the current loads", even though the load current was below the configured maximum and no violations were present when using the 'Show on PCB' feature.
64006	When attempting to analyze all nets for a specific design, and with the 'Skip Ground' option disabled, the error "Failed! Something went wrong please try again" would be encountered.

SI Analyzer by Keysight

63680	When setting the 'Up to Frequency' value for Insertion Losses, it was possible to enter a value beyond the 20 GHz limit (not ultimately used), since the field was not validated against this limit.
64484	For a specific design, when attempting to analyze nets with overlapped pads, the error "An item with the same key has already been added. Key: SIAnalyzer.DataModel.Objects.NetPadItemDataModel" would be encountered.

Version 25.2.1

Build: 25 Date: 14 January 2025

Schematic

61772	For a multi-part component having primitives defined in only one sub-part, it was still (incorrectly) possible to switch sub-parts using the 'Increment Part Number' command, or change display mode through the SCH List panel.
63647	After using the Properties panel's Smart Edit Batch Replace feature for multiple selected strings on a schematic, clicking away from the selected items would incorrectly replace them all with the string of the first item in the selection (the string displayed in the Properties panel after the batch replace). (BC:24501)
63692	Improved speed of selecting multiple objects on a schematic document.
63863	During sequential placement of text strings on a schematic, the value of the Text field was not being selected in the Properties panel after pressing the Tab key.

PCB

61438	Added support for generating a list of nets and copper primitives that are intentionally allowed to short ('Net-Ties') when generating ODB++ V8.1 output
62767	Improved speed of opening large PCBs containing a very large number of regions.
63182	In some cases, the 'Unrouted (Manhattan)' parameter value for a net (PCB panel) would display as '0', even though an Un-routed Net violation for that net existed.
63188	In some cases when applying teardrops, the straight Line style would be applied instead of the chosen Curved style. (BC:24557)
63525	The 'Dynamic Phase Matching for DiffPairs' feature, delivered by the PCB.Rules.DiffpairPhaseMatching option (Advanced Settings), is now officially made Public with this release (ON by default).
63644	For some designs and with the PCB.Wirebonding option enabled (Advanced Settings), there was a negative impact on performance when switching between 2D and 3D views of the board, and with 3D Body visibility disabled in 2D.
63709	Improved selection speed for nets with via shielding and via stitching, especially on larger designs.
63745	In some cases, the bounding box for a selected component was not being displayed correctly if its footprint contained custom shaped pads whose shape had been edited.
63773	In the PCB Rules and Constraints Editor dialog, if a Matched Lengths rule's scope targeted an xSignal class, the Test Queries feature would always return '0' matching items. (BC:24434)
63774	Further improved PCB loading times, especially on larger designs, through internal optimization of pad registration.
63852	The Interactive Router would ignore cavities, allowing a trace to be placed despite the presence of a Clearance Boundary.
63874	The 'Auto-shrinking During Interactive Routing' feature, delivered by the PCB.Routing.EnableAutoShrinking option (Advanced Settings), is now officially made Public with this release (ON by default).
63881	The 'Routing Neck-Down Rule' feature, delivered by the PCB.Rules.RoutingNeckdown option (Advanced Settings), is now officially made Public with this release (ON by default).
64050	It was not possible to drag tracks close to desired objects (in HugNPush Obstacles mode). Dragging/sliding would lag or stop altogether.
64099	In some cases when routing between two vias, an Access Violation (in module 'RouterEntry.dll') would be encountered.
64124	In some cases when trying to open a PCB document (any PCB document), the error "E3DError: E_INVALIDARG" would be encountered. (BC:24742)
64185	In some cases while rerouting an incomplete connection, an Access Violation (in module 'RouterEntry.dll') would be encountered.

PCB CoDesign

60872	The 'ChannelOffset' property is now ignored when listing the detected conflicts for components.
63625	Conflicts on mechanical layers were incorrectly being presented in the PCB CoDesign panel as part of the 'Copper' category.
63628	For detected copper changes (Arc, Connection, Pad, Track, etc), the associated net name is now presented in the PCB CoDesign panel. In addition and for a connection, all layers on which that connection is represented are also now displayed.
63811	The 'RulePriority' property is now ignored when listing the detected conflicts for rules.
63847	Improved usability of the PCB CoDesign panel. Expanding and collapsing a category now keeps consistent presentation of conflict information and without displaying double scroll bars.
63858	Improved performance in comparison of connections, considerably reducing the overall time to perform a board comparison.

Constraint Manager

62483	From the PCB, after creating new Clearance rules (in the Clearance Matrix or Physical view for example), those rules would not appear in the All Rules view until after closing and re-accessing the Constraint Manager.
62986	After pushing 'Routing Neck-Down' constraints through to the PCB for a specific design, accessing the Constraint Manager's Physical view and changing the units to 'mm', the values for the Routing Neck-Down entries were still presented in 'mil' until saving and reopening.
63168	Added the ability to add a comment to a constraint/rule, across any of the views in the Constraint Manager.
63193	After choosing the Custom routing topology type, xSignals are now automatically created for simple xNets (those with one source, one destination and one discrete component between each pair of nets).
63226	After migrating from the old rules system to the Constraint Manager, the value of the 'Direction From Pad' constraint, for the default Fanout_BGA rule, was incorrect.
63538	Custom scopes defined and assigned to advanced rules in the All Rules view (when accessed from the PCB) were becoming unassigned after saving, closing and reopening the constraints and PCB.
63610	In some cases when adding a scope within the Clearances view, the error "System.Collections.Generic.KeyNotFoundException: The given key "ConstraintsManager.Module.DataModels.Scopes.ScopeData" was not present in the dictionary" would be encountered.
63655	Added the ability to remove multiple selected classes, xNets and differential pairs when working within the Physical and Electrical views.
63688	For a parameter set directive attached to a single wire, added the ability to display associated data from the Constraint Manager (net/diff pair class name and rule settings) near to that directive on the schematic sheet.
63732	Added the ability to delete multiple advanced rules from the All Rules view (when accessed from the PCB). Delete one or more selected advanced rules or all advanced rules of a particular type.
63735	Generation of xNets now supports serial components with more than two pins. The following serial components are supported: Single/Dual-inline component with an even number of pins; component with an odd number of pins.
64094	After importing a net class from a parameter set directive and then deleting that class from the Constraint Manager, the class would be added again on a subsequent refresh, with no way to delete it from the parameter set itself.
64125	After enabling the Creepage option (with a value) for an entry in the Clearances Matrix, copying and pasting any further cell values in the matrix would not be saved.
64136	After importing a parameter set directive, attached to a wire (net) and with a defined rule, moving that directive between wires (nets) would result in the rule becoming replicated within that directive. (BC:24143)
64137	For a parameter set directive including defined Net Classes, that is attached to a blanket, after syncing/importing with/to the Constraint Manager, it is now possible to toggle the display of Net Class directive information in the design space.

Draftsman

57464	When accessing the properties of a particular text object in a specific Draftsman document, the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered.
63657	For a selected Diametral or Radial dimension on a PCBDwf, enabling the 'Override Value With' option and adding a value (in the Properties panel) would change the text value of the dimension in the design space, but its graphical display would remain unchanged.

Wire Bonding

62068	Added support for using the 'IsBondWireConnected' and 'IsBondFinger' query keywords when constructing query expressions to use in the filtering of objects in a PCB/PcbLib.
63687	Enhanced the binding of a die pad to an overlapping 3D body placed on the Die layer (referred to as a 'Die Body'). A die pad will now be linked to this overlapping die body, inheriting its height. Any geometric modifications to the die pad or die body (location, size, etc) will update the link, keeping the height of the die pad in-sync with its linked die body.

Harness Design

55163	In a Layout Drawing, after deleting a bundle with a covering and then using the Undo feature, the bundle would be restored but the covering would not be displayed in the design space (just its designator and comment).
61166	In some cases, the names of wires and cables in a BOM table (in a HarDwf document) were being reset if the ActiveBOM document was closed during the import of changes from the Layout Drawing.
63104	In some cases when adjusting a wire/bundle coming out of a main bundle on a Layout Drawing, any covering associated with the main bundle would disappear.
63329	In the Wiring Diagram, where a selected harness component had an alternate display mode defined, the Cavities tab (in the Properties panel) would present duplicated pin entries. (BC:24584)
63613	In some cases when choosing an associated part to use for the Physical Model for a selected connection point in a layout drawing, the error "System.InvalidOperationException: Sequence contains no elements" would be encountered.

Platform

63623

Changed the name of the dialog that appears when trying to use on-demand services and you are currently disconnected from Altium. Now titled 'On-demand Services Disabled', the information text has been made clearer, with a link provided to the System - Account Management page of Preferences.

63751

The ability to enable the use of self-signed certificates, delivered by the System.AllowSelfSignedCertificates option (Advanced Settings), is now officially made Public with this release (OFF by default). If enabled, it is advised to verify with your IT department. When using an Altium On-Prem Enterprise Server, it is recommended to generate your own certificate (using your standard/preferable tools) and then configure this certificate in IIS. For more information, see Configuring a Certificate.

Data Management

63482	In some cases when working with comments in an ActiveBOM, the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered.
63495	Data shown in the Flat view for an Output Job's BOM output, with an alternatives group for a component defined, was not correct and did not match with the data in the same view mode in the ActiveBOM. (BC:24183)
63573	After deleting a Workspace component (through the Explorer panel), the 'Deleting...' pop-up window would not close after confirmation that the deletion was successful. (BC:24693)
63693	After releasing a specific and large PCB design multiple times using the Project Releaser, a memory leak would occur. (BC:23712)
63777	Enhanced the Manufacturer Part Search panel with more detailed information about a part's models, including whether they are considered 'Generic' or 'ECAD Ready'. In the latter case, such models have been 'qualified' by the manufacturer as being ready for use in CAD designs, with qualification the result of following a dedicated validation flow, in combination with adherence to a specific manufacturer datasheet, IPC standard and applicable revision of the publicly available 'CAD Model Style Guide'. This same information is made available in the Use Component Data dialog, when saving a part to a connected Workspace. For parts with Generic models, you have the ability to vote to get qualified models made/added.
63820	In a specific case after momentarily losing internet connection, the error "SearchTemplateService not found for current vault" was encountered in a 'looping' fashion, essentially freezing the software.
63828	In a specific case, attempting to generate PCB prints from an Output Job file, to a physical printing device configured as part of a Hard Copy Print Job, resulted in a hard crash (with no message) of Altium Designer.
63834	When importing components from a specific database library into a connected Workspace using the Library Importer, part choices were not being migrated correctly, instead becoming mixed up between components.
63837	When configuring a variant for a design, any specified alternate part for a component was missing the base (non-varied) footprint for that component when viewing that variant in 3D, and generating manufacturing (fabrication and assembly) outputs for it, when the option 'Do not overwrite PCB footprint' was enabled.
63890	In specific versions of Altium Designer (24.8.2, 24.9.1, 24.10.1) and when using a specific Excel BOM template uploaded to a connected Workspace, it was not possible to generate BOM output using the file format "Generic XLS". The error "Failed to open Excel Template – The template file may be corrupted or in unsupported format" would be encountered.
64080	Search filter range fields ('From:' and 'To:') in the Manufacturer Part Search panel, and some search filters in the Components panel, were presenting in imperial (mil) but not metric (mm).
64086	In some cases, trying to place a component from a newly-created DbLib would result in the error "DocView is not available" being encountered. In other cases, this same error would appear when trying to add a new DbLink file to a project. (BC:24775)

Import/Export

61990	Added support for custom ports, custom power ports and custom off-sheet connectors, when importing an xDX Designer design.
62256	When importing a specific Allegro design, spacing/clearance rules were being imported with incorrect values in the clearance matrices of the applicable design rules for the generated PCB document.

Power Analyzer by Keysight

63700

After making a change to a component's designator in the design, the Power Analyzer Keysight document (<ProjectName>.pdnaK) would become corrupted, leading to the error "VemEngine failed" being encountered when attempting to perform an analysis.

SI Analyzer by Keysight

64082	When attempting to analyze a specific design, the error "An item with the same key has already been added. Key: SIAnalyzer.DataModel.Objects.NetPadItemDataModel" would be encountered.
64115	For a specific design, performing an analysis would never run to completion.

Other

60387

In some cases, the error "EAccessViolation: Access violation at address 0000001400A60D2D in module "X2.EXE"" would be encountered.

Version 25.1.2

Build: 22 Date: 12 December 2024

Schematic

62598	For a design with alternate parts specified in variants, using the 'Update Parameters From Database' command would lead to an Access Violation (at address 00000001420CB80F in module ‘WorkspaceManager.DLL') being encountered in the ECO dialog. (BC:23993, BC:24337)
62914	The arithmetic functions CEIL, FLOOR, FRAC, INT, MAX, MIN, POWER, SIGN, SQR, SQRT, TRUNC, and ZERO were not being resolved when used within a placed special string on a schematic.
62968	In some cases, the error "EOleException: The method or operation is not implemented" would be encountered.
63190	When placing a reuse block with a blanket, as a sheet symbol, the blanket was moved 50mils to one side.
63198	When using the new Variant Manager (UI.ModernVariantsManager ON), the error "Value cannot be null. (Parameter 'key')" would be encountered if a component parameter was named '*'.
63371	Switching between schematic documents was sending too many requests to the connected Workspace, impacting performance.

PCB

59813	For a specific and large design, selecting various pads throughout the board would take a long time, effectively 'freezing' Altium Designer.
61919	In some cases when using the Automatic Length Tuning feature with multiple selected traces, performance was noticeably slow, with tuning taking in excess of a minute to complete.
62460	With a specific PCB open and the PCB panel set to its 'Hole Size Editor' mode, switching to and changing a parameter in the Layer Stack Manager, then coming back to the PCB again, would result in an Access Violation being encountered.
62893	As part of automatic loop removal when using the Interactive Router, connections to polygon pours are no longer severed.
62940	Improved support for exporting a panelized PCB (Embedded Board Array) to Parasolid format. A Route Tool Path is now cut through all board layers in the exported file, and cavities and board cutouts from a source board are now also taken into account on the panelized PCB.
63110	In a specific case when making changes to the layer stack for a board and then switching back to the PCB and saving, an Access Violation (in module ADVPCB.DLL) would be encountered.
63262	The feature to improve performance of PCB loading by using regions triangulation cache, delivered by the PCB.Performance.UseRegionTriangulationCache option (Advanced Settings), is now officially made Public with this release (ON by default).
63399	When using the Automatic Length Tuning feature with phase matching for differential pairs enabled (PCB.TraceTuning.PhaseTuning option ON), the field for 'Actual Height' was missing from the Sawtooth tab of the Auto Tuning Process dialog. (BC:24376)
63466	When running a Component Rule Check for a PcbLib featuring wire bonding components, incorrect warnings regarding 'Shorted Copper' (between die pads and a ground pad) would be reported.
63517	The 'Enhanced Return Path Rule' feature, delivered by the PCB.Rules.CheckReturnPathVia option (Advanced Settings), is now officially made Public with this release (ON by default).
63543	For a specific design, switching between 2D and 3D viewing modes would take several minutes.
63583	The 'Enhanced Automatic Loop Removal' feature, delivered by the Legacy.PCB.Routing.LoopRemoval option (Advanced Settings), remains in Open Beta (OFF by default) with this release, but now applies to all routing modes.
63601	For a specific PCB design containing differential pairs, attempting to export into Ansys EDB format would result in the error "Object reference not set to an instance of an object" being encountered.
63661	For some outlines composed of lines and arcs, the "Create Region From Selected Primitives" feature did not work, and there was no message to offer automated resolution. (BC:24031)
63672	Updated terminology in the 'Auto Tuning Process' dialog to better reflect control actions. Pattern -> 'Tuning Goal', Accordion -> 'Min/Max/Group Matching', Sawtooth -> 'Within Pair Matching'.
63865	When generating a PDF from a panelized board, custom pad shapes were incorrectly being shown printed with an offset and rotated. (BC:24230)

PCB CoDesign

63255	When viewing changes to components in the PCB CoDesign panel, components are now sorted by designator rather than alphabetically.
63340	Improved performance when comparing and merging changes made to very large designs.
63487	The 'PourIndex' property is now ignored when listing the detected conflicts for polygon pours.
63502	For a specific design, unexpected conflicts were being presented after running a comparison.
63563	In a specific case after running a comparison, attempting to resolve conflicts using the Remote design (latest commit in the connected Workspace) would result in an error being encountered upon merging.
63650	When performing a Compare and Merge for a specific design, the primitives within one component were being duplicated.
63654	When performing a Compare and Merge for a specific design and repouring all polygon pours, some polygons would not repour, while others would partially disappear from a particular layer.

Constraint Manager

61226	Additional layers of clearances defined for All Nets in the Clearances view, were not being correctly transferred to the Clearance entry for All Nets in the Physical view.
62309	When creating a new class from expanded xNets (with both xNets and nets selected), the class contained duplicate entries for those xNets and nets.
62745	When importing a constraint set into which Clearance rules were exported, those Clearance rules were missing in the 'Constraint Sets to Import' dialog, and therefore not imported.
62961	After removing all rule values for an entity with a constraint set assigned (Physical/Electrical view), the name of the set itself was not being removed.
63125	When attempting to access the Constraint Manager from a specific PCB, the error "An item with the same key has already been added" would be encountered.
63143	With a Routing Via Style advanced rule selected (All Rules view when accessed from PCB), choosing 'Template preferred' in the lower section did not display a table of via templates from which to enable.
63195	When creating a new Workspace project from a project template in which constraints have been defined (using the Constraint Manager), those constraints were not being presented until the newly-created project was closed and reopened.
63221	Export/import of constraints/constraint sets is now handled by a single Export/Import command respectively. In addition, when importing a constraint and constraint set with the same scope, the constraint set will be used.
63398	For rules added to a parameter set directive that are not presented in the Physical and Electrical views, those rules will automatically be created as Advanced Rules, upon completion of either import of directives or migration from the older rule management system, and subsequent ECO from the schematic through to the PCB.

Draftsman

62618	When attempting to open a specific PCB manufacturing file (PCBDwf), the document would not open and was consuming 80% RAM.
63501	When defining a custom sheet size for a Draftsman document, the maximum Width and Height that can be entered is now 20000 mm.

Wire Bonding

61402	When using the 'Align Bond Finger with Bond Wire' feature, the bond finger pads are now correctly oriented, with the longer side of a pad always kept in parallel with the bond wire.
63404	Improved the Find Similar Objects dialog in the context of bond wires, to now include 'Diameter', 'Die Bond Type', 'Length 3D', and 'Loop Height' object-specific parameters.

3D-MID Design

63396

While routing on the substrate of a specific design, Altium Designer would suddenly freeze.

Multi-board Design

53686	When trying to open a specific multi-board schematic document, the error "Unable to load drawing document..." would be encountered.
63114	When selecting a harness object in a specific multi-board schematic document, the error "Unable to cast object of type..." would be encountered.

Harness Design

63099	When importing changes into a manufacturing document (HarDwf), the ECO process was not detecting any changes to the capitalization of parameters.
63120	Changed the color used for text in the 'Length Value' and 'Offset Length' columns (Bundle Objects section of the Properties panel, with a bundle selected in the Layout Drawing) to improve readability when an entire row/column is selected.
63609	In some cases when performing interactive actions on some object types in a Wiring Diagram/Layout Drawing (e.g., copying a wire), and where the Properties panel was active, but not visible, the error "System.ArgumentNullException: Value cannot be null. (Parameter "source")" would be encountered.

Platform

58194	In some cases when opening the Explorer panel, the error "EOleException: EndInit. Must call BeginInit before EndInit" would be encountered.
59094	In some cases, Altium Designer would freeze when working with Database Library (DbLib) and Database Link (DbLink) files. (BC:22438)
62639	Added an Advanced Settings option (System.UnifiedLogin) that when enabled, provides a single location for signing in to your Altium Account via an external browser, using direct email credentials, a linked Facebook or Google account, or through configured SSO.
62792	The option to use CefSharp v.126 for browser-related elements within Altium Designer, delivered by the System.UseCefSharp123 option (Advanced Settings), is now officially made Public with this release (ON by default).
62965	Altium Designer would terminate when trying to open/close a project and its documents if the third party application "Sticky Password" was also running.
63327	The ability to enable the use of self-signed certificates, delivered by the System.AllowSelfSignedCertificates option (Advanced Settings), remains in Open Beta but is now OFF by default with this release. If enabled, it is advised to verify with your IT department. When using an Altium On-Prem Enterprise Server, it is recommended to generate your own certificate (using your standard/preferable tools) and then configure this certificate in IIS. For more information, see Configuring a Certificate.
63381	The option "Unified Sign In" is now enabled by default in the Advanced Settings window of the Altium Designer installer. When enabled, it replaces login to your Altium Account by UserName\Password with unified login via an external browser.
63749	When running a specific script to generate output files, there was an error generating schematic prints in a PDF file.

Data Management

54731	In some cases when grouping and sorting results in the Components panel, the error "System.AggregateException: One or more errors occurred..." would be encountered.
59781	After saving changes to a specific design to a connected Altium 365 Workspace, the Web Viewer was not updating to reflect those changes.
60191	'Shared with Me' projects did not receive real-time updates to comments and replies in AD, where changes were being made through the Workspace's browser interface or by another user.
62984	Hidden pins were not being taken into consideration as part of the 'Number of Pads exceeds Number of Pins' validation check for a Workspace component. (BC:24190)
63003	When editing a Workspace component and copying a symbol or footprint model, the name of the copied model is now given the prefix 'Copy of'. (BC:24196)
63004	When editing a Workspace component and copying a footprint model, it is now possible to choose whether to keep the original model and the copy or to replace the original with the copy. (BC:24196)
63013	Added support for variants as part of the 'Where Used' feature in the Components panel.
63061	Search filters in the Components and Manufacturer Part Search panels were available in imperial (mil) but not metric (mm).
63062	When viewing a BOM in ActiveBOM's Consolidated View mode, items were being presented on different lines, even when their DesignItemId was the same.
63063	For a project with a large number of variants, memory leaks with the Project Releaser would result in an error and eventual termination of Altium Designer during release preparation. (BC:24207)
63106	Reporting levels for ActiveBOM SiliconExpert-related BOM Checks now observe the levels defined for the SiliconExpert Integration app, through the connected Workspace's browser interface.
63123	If, with a Component Template still actively open for editing, Altium Designer is closed and reopened, the Lifecycle Definition and Revision Naming fields would disappear.
63131	When more than one copy of the same Workspace project was open (from different local folders), trying to revert a commit in one would lead to the error "There are more then one project opened...".
63138	Changed control text from 'Show less filters' to 'Show fewer filters' at the bottom of the Filters pane, in both the Components and Manufacturer Part Search panels.
63147	It was possible to add a 'Web Review' output to an Output Job for an empty design project. Generating output would lead to the error "Error while initializing DesignReview Support CLR Host: Unable to create .Net object Altium.OutputJobFactory..." being encountered. (BC:24272)
63156	For a 'Shared with Me' project, it was not possible to work with comments assigned as tasks without being connected to the source Workspace.
63162	In some cases when opening a document supporting comments in a 'Shared with Me' project, the error "Response status code does not indicate success: 403 (Forbidden)" would be encountered.
63203	In a specific case, Altium Designer would hang indefinitely on opening if a VCS-controlled document was open when the software was last closed.
63218	After making a copy of an existing component in the Component editor (in its Batch Component Editing mode), an error would be encountered when trying to assign the original component's datasheet to the copy. (BC:24280)
63268	When viewing a project in Classic mode in the Explorer panel, the "View" sub-menu would disappear from the top-right Settings menu after changing the state for any other option above the menu.
63341	For the error dialog that appears when insecurely signing in to an Altium 365 Workspace on the GovCloud, the portion of text "is ITAR compliant" has been changed to "is supporting export regulated data".
63356	When deleting a Managed OutJob from a Project (Projects panel -> Remove from Project), it was not removed from the local project folder structure. As such, it was not possible to add it back to the project without deleting the physical folder (under Managed\OutputJobs).
63507	The 'Compare' menu was missing from the right-click History & Version Control sub-menu for a Workspace project, when connected to an on-premises Workspace via the HTTPS protocol.
63553	Introduced 'BOM CoDesign', enabling the designer and procurement expert to interact using 'Related BOM' snapshots (created from and/or linked to the design), including web-based comparison.
64106	In some cases when attempting to access the Project menu for a project under external VCS control, the error "This operation is not supported for a relative URI" would be encountered. (BC:24729)

Import/Export

61022	When importing an Allegro design, pads were being imported with a Thermal Relief connection to polygon pours instead of a Direct Connection, as per the original design.
62416	When importing an OrCAD design, power ports were imported with the 'Custom' style. Attempting to change this to a standard style would result in the custom graphic remaining, superimposed. (BC:23886)
62585	When importing a KiCad design, nets connected to buses were not being imported correctly.
63241	Minimized load times for the PCB editor UI to greatly improve import speed for Allegro designs (in .alg format).

SI Analyzer by Keysight

63555

When trying to access the SI Analyzer for a specific board, the error "System.Collections.Generic.KeyNotFoundException" would be encountered in relation to a specific diff pair.

Other

62723

In some cases, an Access Violation (in module 'PinSwapper.DLL') would be encountered.

Version 25.0.2

Build: 28 Date: 12 November 2024

Schematic

62145	Improved the speed when selecting any object type on a schematic for the first time and displaying its associated properties in the Properties panel.
62312	In some cases when working with a schematic, the error "System.NullReferenceException..." would be encountered.
62611	When opening a specific PCB design, the error "An item with the same key has already been added..." would occur during initial background compilation.
63223	In some cases when using multi-part components, a false violation "Component <Designator> <Name> has unused sub-part(s) (0)" would be encountered, since there is no sub-part number '0'. (BC:24458, BC:24462)
63373	Changing the style used for a selected power port (through the Properties panel) was not being correctly reflected on the schematic in the design space. (BC:24343)

PCB

61336	In some cases, placed text using a TrueType font would have characters missing. (BC:22685)
61705	An AV would be encountered when using the PCB Rules and Constraints Editor dialog to create a new rule using the Wizard, then creating a different new rule from the right-click menu, followed by clicking the 'Create Default Rules' button.
61956	In some cases when adding teardrops, an irregular shape would be generated where a trace entered a pad at an angle. (I:21090)
62587	When opening a design containing Donut-shaped pads in a version of Altium Designer without the PCB.Pad.CustomShape.Donut option, the pad shape diameter was incorrectly greater than the hole diameter. (I:18588)
62783	When exporting to DXF format, copper regions with arcs were being exported unfilled.
62888	Antennas with vias are now always preserved during automatic loop removal, when using the Interactive Router (irrespective of the state of the Legacy.PCB.Routing.LoopRemoval option).
62931	For a specific design, false Minimum Annular Ring DRC violations would be encountered when the PCB.Rules.MinimumAnnularRingConnected option (Advanced Settings dialog) was enabled.
62975	It was not possible to edit a pad, with custom pad shape, when placed on a Die Pad layer.
63010	With the 'Double Click Runs Interactive Properties' option disabled (PCB Editor - General Preferences), changing the layer for a selected pad in the Pad dialog, then pressing Esc, resulted in the pad no longer being selectable.
63011	The 'Single Layer PCB Support' feature, delivered by the PCB.SingleLayerStack.Support option (Advanced Settings), is now officially made Public with this release (ON by default).
63045	When generating a PDF from a panelized board, custom pad shapes were either missing or incorrectly showing an offset. (BC:24008)
63090	For a Component Clearance rule in the PCB Rules and Constraints Editor dialog, the 'Test Queries' feature would return no results when using "ObjectKind ='3D Body'", "IsComponentBody", "Id ='..'", or "Identifier ='..'" in the scoping query expression. (BC:24002, BC:24103, BC:24165, BC:24193)
63132	The 'True Round Donut Pad Support' feature, delivered by the PCB.Pad.CustomShape.Donut option (Advanced Settings), is now officially made Public with this release (ON by default).
63154	In some cases when working with properties for a selected component (through the Properties panel), the error "EOleException: Exception has been thrown by the target of an invocation" would be encountered.
63233	In some cases when working with the Selection Filter in the Properties panel (from a PCB), the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered.
63402	For a rigid-flex design, a free 3D body (STEP file) would incorrectly be shown multiple times as the board was folded. (BC:24373)
63571	Right-clicking did not always end an interactive command in the PCB editor (e.g., when using the Interactive Routing tools). Note that this reverts the fix for issue #62140, made in the Altium Designer 24.10 release.

PCB CoDesign

62973

Added an 'Undo Merge' control to the PCB CoDesign panel, allowing you, if needed, to revert merge results after performing a successful merge.

Constraint Manager

58652	In some cases and for certain selected entities, it was not possible to see all of the settings in the bottom section of the Constraint Manager.
62465	Cross-probing from a clearance constraint in the Applicable Binary Rules dialog was not working correctly, with the applicable cell within the Constraint Manager's clearance matrix not being highlighted.
62625	The ability to 'Import from Directives' has been made part of the refresh functionality (when clicking the Refresh button in the Constraint Manager). Changes within net classes, diff-pairs and diff-pair classes (new/removed elements) imported from directives before are now detected, with indication of any inconsistencies requiring synchronization (between schematics and Constraint Manager). (BC:23822, BC:24227)
62921	When viewing the Clearance Matrix (Clearances view) with filtering applied, a defined clearance value would not be applied to the correct cell in the filtered view
62947	In some cases when working with the Polygon Pour Manager dialog, clicking the 'New Clearance Rule' or 'New Connect Style' buttons would lead to an Access Violation being encountered, freezing Altium Designer.

Draftsman

62395

For a placed linear dimension, it is now possible to define an Override Value greater than 9525 mm (375 Inches, 37500 mil). (BC:23900)

CAMtastic

56248

For a specific .Cam document, attempting to export to ODB++ format would result in an external exception being encountered.

Wire Bonding

62268	Die chip pins are now bound, by height, to the 3D body they are placed on, with the ability to select which body in a set of overlapping bodies.
63007	In the Wire Bonding Table Report, bond wires are now sorted by component and pad number.
63152	When preparing a release using the Project Releaser, an included Wire Bonding Table Report was incorrectly being opened (automatically) after its generation.

3D-MID Design

62609	If a footprint contains custom pads, those pads are now recognized when the footprint is placed onto a 3D substrate.
63258	For a specific 3D-MID design, attempting to export to STEP, IGES or Parasolid format would result in an Access Violation (in module 'c3d_routing.dll') being encountered. (BC:24309)

Multi-board Design

59872	Added support for adding and connecting external peripherals/components to a multi-board schematic document. (I:9589, I:22859)
62658	It is now possible to use the Commenting and Tasks features with a Multi-board Draftsman document (*.MbDwf) that is part of a fully-managed project.

Harness Design

61319	Added the ability to override the calculated length for a wire on the Layout Drawing, either by manually defining the required absolute length, or by adding an offset to calculated data. If the design is synchronized with MCAD (using MCAD CoDesigner), length data is obtained on pulling the design from MCAD, with the ability to manually override if needed.
62179	It was not possible to split a cable using splices on selected wires of that cable.
62340	Beyond initial import, component orientation in the layout drawing was incorrectly still following that in the wiring diagram, on subsequent imports of the latter.
62342	When connecting two wires of differing gauge, an 'Unnecessary Splice' violation would incorrectly arise.
62818	When adding an associated part to a connection point and changing the latter's designator, the BOM was not correctly displaying this designator, leading to duplicate entries.
63042	The 'Harness Design Project Release' feature, delivered by the HarnessDesign.ProjectReleaser option (Advanced Settings), is now officially made Public with this release (ON by default).

Platform

59570	Altium Designer would terminate when attempting to create a new project with invalid characters in the Folder name.
61277	When attempting to access a drop-down list when configuring filtering for a column in the Components or Manufacturer Part Search panels, an error would be encountered.
62591	In some cases, the error "System.Net.Sockets.SocketException: No such host is known" would be encountered.
62596	Added a new advanced settings option 'System.AllowSelfSignedCertificates' to enable the use of self-signed certificates. If enabled, it is advised to verify with your IT department.
62749	The icon used for an extension is now updated when updating to a new version of that extension (either when updating the extension only or when updating the Altium Designer platform and extensions).
62780	The 'Redesigned License Management Page', delivered by the System.LicenseManagement2023 option (Advanced Settings), is now officially made Public with this release (ON by default).
62781	The 'Harness & Multi-board View Only Mode' feature, delivered by the System.ViewOnlyMode.Support option (Advanced Settings), remains in Open Beta but is now ON by default with this release.

Data Management

57262	It was possible for a user with viewing rights only to edit symbol and footprint models in a Workspace Library, although they could not save any changes.
60388	In some cases when working with the Component editor, an Access Violation (at address 0000000180CCAE98 in module "UnifiedComponent.DLL") would be encountered.
60493	Updating the VCS statuses of documents in a project took a very long time, after another user had previously made a sizable number of commits (100+) across documents in the same project.
61059	When browsing Generic Components on the Components panel, the icon used for the 'JFET n-channel' component was the same as that for the 'JFET p-channel' component.
62384	Parameters for a component in one variant were being overwritten by those defined for a chosen alternate component in a second variant, where the second variant was created as a copy of the first. (BC:23861)
62463	The 'Configure Pin Swapping' command was missing from the Tools menu of the schematic symbol editor, when accessed from the component editor (single and batch editing modes) and Explorer panel.
62710	The 'Show only matching with template' option was incorrectly presented in the Use Component Data dialog (when creating a new component), when connected to an Altium 365 Workspace with 'Standard' level of access.
62761	Fully implemented solution to the Git error that a 'file could not be removed because it was in use by another process', extending to other document types.
62842	In some cases, cloning a component and adding/removing parameters to/from the clone, would result in an Access Violation (in module 'UnifiedComponent.DLL'). (BC:23906)
62858	Defined variant parameters are now included when releasing assembly data using the Project Releaser.
62876	When creating a new component using the Component editor (in Single Component Editing mode), the 'Allow override' option for applicable fields in a referenced component template was being ignored, preventing field values from being changed in the editor.
62901	In a specific case, the error "EStringListError: List index out of bounds (2)" would be encountered.
62937	When clicking 'Save to Server', update of the VCS project is now skipped if the local repository is up to date.
62945	For an Item type in a connected Workspace that supports upload of data into a new revision, it was not possible to access the 'Advanced' region of the Create New Revision dialog. (BC:24173)
62950	When generating Ansys EDB data through an Output Job, the error "Error while initializing Ansys EDB Support CLR Host: Unable to get address: GetDotNetHost" would be encountered.
62953	Where a project was already open in the Projects panel when closing Altium Designer, its status was not being automatically refreshed upon reopening the software again.
62954	The Open Project dialog has been improved with messaging for, and a control to open, non-Altium Designer projects (existing in the connected Workspace) in Altium 365's Web Viewer only.
62963	For a project stored in a connected Workspace, the 'database' part of its icon has been removed from all relevant places in the UI (e.g., Projects panel and Open Project dialog).
63078	When opening the history for a project from within the Explorer panel (project not open in Projects panel), using the 'Revert To' feature would cause a hard crash.

Requirements Management

62874

Added ability, while placing a requirement within Altium Designer, to click on its ID to open that project requirement within Altium 365.

Import/Export

62070	When importing a specific Xpedition library, an 'assertion failure' error would be encountered, with the entire import taking a long time and consuming >90% of computer memory.
62662	When importing a specific xDX Designer design, the template for each generated schematic sheet was incorrectly shifted.

SI Analyzer by Keysight

63556

In some cases when attempting to analyze nets for the active PCB from the SI Analyzer by Keysight document, the error "The given key <KeyName> was not present in the dictionary" would be encountered.

Other

62725

In some cases, an Access Violation (at address 000000014CB04ACE in module "EDMSInterface.dll") would be encountered.

Version 24.10.1

Build: 45 Date: 10 October 2024

Schematic

61654	Instances of managed sheets placed within a design are now presented in the Web Viewer.
62392	Improved single/multi-part symbol handling, extending the same features and functionality available for Alternate display modes, to the 'Normal' display mode. (I:9891)
62663	In a specific case, a company logo graphic (in SVG format) was no longer being displayed on the schematic.
62869	When editing the values of multiple parameters for a selected component (one after another) in the Properties panel, a second click into a field was needed to edit its value. (BC:24126)
63054	In some cases when working with the Properties panel, the error "System.Runtime.InteropServices.InvalidComObjectException: COM object that has been separated from its underlying RCW cannot be used" would be encountered.

PCB

55389	In some cases when trying to change parameters for a region placed on a plane layer, through the PCB List panel, an Access Violation would be encountered.
59269	SVG geometry generated for the solder mask layer did not include cutouts (openings) for route tool paths.
59866	Added Dynamic Phase Matching support for differential pairs, including Matched Lengths rule expanded with dynamic phase matching constraints, batch DRC support and automatic length tuning with phase compensation. (I:14281)
60119	Added Routing Topology design rule as part of DRC, checking custom topologies (essentially that all From-Tos have the correct implementation).
60464	In some cases with the 'Component pushing' option set to 'Push', moving a rotated component (or a component with an irregular courtyard) would result in the component 'jumping' rather than moving smoothly.
60663	Added the ability to enable phase matching between the sides of a differential pair as part of automatic diff pair length tuning.
60883	Added support for designing hybrid boards with chip-on-board (CoB) technology using Wire Bonding. (I:3207)
61404	In some cases with the 'Component pushing' option set to 'Avoid', a component would become stuck when attempting to move it, not able to be moved smoothly as expected.
61409	With the 'Component pushing' option set to 'Avoid', moving a component did not observe the applicable clearance rule.
61587	For a polygon pour with 'Remove Necks Less Than' and 'Obey Rules' options enabled, thermal connections to pads in the polygon were incorrectly allowed to become smaller than the allowable width rule.
62084	When rerouting from an existing diff-pair using a '45/90 with arc' corner style, the arcs were not concentric.
62140	There was a noticeable delay when starting to pan within the design space, when an interactive command (e.g. Move Object, Interactive Routing, etc...) was running.
62316	For a specific design, generation of ODB++ data in either v8 or v7.1 format would result in an arc in the design being generated as a full circle.
62434	When changing the shape of a pad to 'Custom Shape', the shape used for that pad immediately before was not being applied/inherited.
62442	For a specific footprint, flipping it to the bottom layer and back resulted in a shifting of copper objects within the footprint.
62617	The Test Queries feature, in the PCB Rules and Constraints Editor dialog, was not working correctly. (BC:24002, BC:24087)
62716	The 'Footprint Mirroring Prevention' and 'Enhanced Hole Clearance Detection' features are now officially made Public with this release (both ON by default).
62788	When editing polygon and solid region corners, information for 'Radius' and 'Angles' was missing from the heads-up display. (BC:24095)
62848	The 'Enhanced Return Path Rule' feature, delivered by the PCB.Rules.CheckReturnPathVia option (Advanced Settings), remains in Open Beta but is now ON by default with this release.
62883	The 'Auto-shrinking During Interactive Routing' feature, delivered by the PCB.Routing.EnableAutoShrinking option (Advanced Settings), remains in Open Beta but is now ON by default with this release.
62899	The 'Routing Neck-Down Rule' feature, delivered by the PCB.Rules.NeckDown option (Advanced Settings), remains in Open Beta but is now ON by default with this release.
63051	Staggered vias were not being displayed correctly in 2D/3D View modes.
63057	In some cases when working with the Health Check tab on the Properties panel (for the board itself), the error "System.ArgumentNullException: Value cannot be null. (Parameter "source")" would be encountered.

PCB CoDesign

62226	Deleted primitives were not being displayed in the Conflicts region of the PCB CoDesign panel.
62457	Display of conflicts between primitives of group objects has been enhanced in the PCB CoDesign panel, with the primitive name now included before its property.
62458	Online DRC is now suppressed when merging, making the merge process faster.
62478	Changing the origin of the board would cause component coordinates to change, leading to conflicts when running a comparison.
62536	Added the ability to merge object properties, where there are no conflicts in value, significantly reducing the number of object conflicts.

Constraint Manager

61707	It was possible to add a net class with the same name as a differential pair class (e.g. in the Physical view), leading to an error being encountered when trying to add the second class to the Clearances matrix.
61829	Added the ability to perform a one-time, one-way migration, from using the old rules management system to using the Constraint Manager.
62623	For an already-imported directive, it is now possible to add, update and remove constraints for it through the Properties panel, with changes made directly to the data in the Constraint Manager.
62626	When preparing the ECO to pass changes from the schematic to the PCB, a warning is now presented if there are directives that exist on the schematics that were not imported into the Constraint Manager.
62635	In the Physical and Electrical (Nets) views, when accessed from the Schematic, the 'Remove rule', 'Remove rules from scope' and 'Delete unmatched object' commands did not work correctly for multiple selected entities.
62785	When accessing the Constraint Manager (from PCB) for a project in Altium Designer 24.7/24.8/24.9, the All Rules view was empty. (BC:24081)
62955	In a specific case, after updating the PCB from schematics and enabling the 'Remove Clearance Constraint [xxx] All' entry in the ECO, the Clearances view in the Constraint Manager (accessed from the PCB) was empty, and subsequent attempts to synchronize (add clearance constraints from schematic side) was not possible. (BC:24181)
62966	In some cases when updating the PCB from the schematics, an Access Violation "EOleException: Value cannot be null. (Parameter "input")" would be encountered. (BC:24258)

Draftsman

62832

In some cases when importing changes from a project's PCB to its Draftsman document, Altium Designer would close unexpectedly if the PCB.OpenCascadeLatestVersion option (Advanced Settings dialog) was enabled.

3D-MID Design

62240

Improved performance when working with designs containing regions.

Harness Design

61563	For the Bulkhead Connector (connector with the largest number of cavities), automatic grouping is applied to the wiring list in a harness manufacturing document, ensuring that all of its cavities are correctly grouped in the From column.
61913	In some cases when working with a Wiring Diagram, the error "EOleException: An item with the same key has already been added" would be encountered.

Platform

61714	When using Altium Designer with Standard Subscription or a Viewer license, Harness and Multi-board design projects (and their associated documents) will now present in 'View Only' mode
62657	In some cases, the highlighting boundary was partially absent for a selected field on the System - Account Management page of the Preferences dialog.
62773	Altium Designer would disconnect from the active Altium 365 Workspace whenever exiting Windows Hibernation mode. (BC:23671)
62859	When configuring layers on the Pages tab of the new Print dialog (UI.Unification.PrintPreviewDialog option enabled in Advanced Settings) to generate prints through an OutJob file (e.g., Assembly Drawings), it was not possible to change layer ordering or disable visibility of layers. (BC:24244)

Data Management

59115	Part choice data was not presented correctly in the ActiveBOM, if a component was sourced from the Altium Content Vault.
61248	Removed a secondary, redundant dialog that was appearing when migrating a local project (under external VCS) to a connected Altium 365 Workspace's native Git repository.
61295	In some cases when working with comments, the error "System.NullReferenceException..." would be encountered.
62052	An error would be encountered when trying to make a copy of a component (through the Components panel), if the Pins panel was also docked and visible.
62182	In some cases, there was a noticeable performance degradation when conducting the first search in the Manufacturer Part Search panel.
62406	Filtering by 'Assignee' was not functioning correctly in the Comments and Tasks panel. (BC:23892)
62482	When adding a comment within the Altium 365 Web Viewer, an included apostrophe (') would incorrectly appear in HTML form (') when viewing that comment in Altium Designer.
62489	The checkbox associated with the Explorer panel's 'Show Hidden Revisions' option would disappear when switching Workspaces. (BC:22587)
62490	When placing a comment with the < character, followed by text other than a space, the error "System.ServiceModel.FaultException: Potentially unsafe input detected" would be encountered. (BC:23563)
62499	When cloning a schematic template through the Explorer panel, multiple clones would appear in the Projects panel if a free document was open in the panel. (BC:23781)
62504	Added the ability, for PCB design projects stored in a connected Altium 365 Workspace, to work with system requirements defined through the Requirements and Systems Portal.
62597	Using the Explorer panel, it was not possible to drag-and-drop a project between sub-folders in a connected Altium 365 Workspace's projects folder structure. (BC:23971)
62636	When editing a Workspace component (in Batch Component Editing mode), removing a default model (taken from the associated component template) and attempting to save, would result in an Access Violation (in module 'UnifiedComponent.DLL').
62660	Within the contextual commenting window, there were no icons associated to the commands (Cut, Copy, Paste) on the right-click context menu.
62673	Attempting to drag a Workspace component entry from within the Explorer panel would result in a "System.NullReferenceException" error. (BC:23971)
62698	Added the ability to view and modify parameters for a local project template, when creating a new project in the Create Project dialog.
62729	In some cases, attempting to save a component to a Workspace (from the Manufacturer Part Search panel) would result in the "Runtime error 231" being encountered, when the user had disconnected from that Workspace on a second instance of Altium Designer.
62887	Parameters from local project templates were missing when creating a new project. (BC:24164)

Additional Note: In the near future, SVN will no longer be supported in the Altium On-Prem Enterprise Server product. We will update you during the next few releases regarding the timeline as to when support will end. Learn more about how you can migrate a project from an SVN repository to the Enterprise Server's built-in Git repository.

Import/Export

61660	Altium Designer would unexpectedly close when trying to import PADS library files, on a computer running Windows 11 Pro (64-bit). (BC:23889)
61964	When importing a KiCad v8 design, component designators in replicated hierarchical sheets were not being annotated correctly.
62339	When attempting to import a specific KiCad design, the Import Wizard would crash with a "Catastrophic Failure".
62362	When attempting to import a specific PADS ASCII file (and associated .c, .d and .p library files), Altium Designer would crash and close.

SI Analyzer by Keysight

62333

Added an enhanced approach to signal integrity analysis directly within the Altium Designer environment, using the SI Analyzer by Keysight.

Other

62464

For components in a specific Altium 365 Workspace, the system parameter 'Description' was not being pushed to the MCAD side when using Altium MCAD CoDesigner.

Version 24.9.1

Build: 31 Date: 11 September 2024

Schematic

59348	In some cases when releasing a project, the exception "Index was outside the bounds of the array" would be encountered. In addition, and for a specific project, attempting to configure a BOM in an OutJob would result in an "Ambiguous match found" error being encountered. (BC:24021)
61606	Empty sub-parts in alternate views of a multi-part component are now omitted during placement. (I:9891)
61822	The list of component parameters was not being automatically refreshed after choosing a replacement component through the Properties panel.

PCB

56380	In some cases when opening Altium Designer with a PCB and the (pinned) PCB Rules And Violations panel visible, right-clicking on the 'Component Clearance Constraint' entry in the panel would result in an Access Violation (in module ADVPCB.DLL).
59683	In some cases when editing an object or using an interactive command, an Access Violation (at address 000000015CEEC132 in module "ADVPCB.DLL") would be encountered.
61376	In some cases after copying/pasting an error-free union of precisely placed components elsewhere in a design, some of the replicated groups of components would produce component clearance violations.
61955	It is now possible to place components close enough that their courtyard outlines exactly overlap. To disable clearance checking (when a design requires overlapping components) enter a negative value for the Minimum Horizontal Clearance in the applicable Component Clearance rule. (BC:3247, BC:22953, I:21187)
62115	For a selected Workspace component, it is now possible to select and copy its footprint name, from the Footprint Name field in the Properties panel.
62407	A Clearance design rule scoped with InStructureClass vs InStructureClass was not generating DRC violations. (BC:23901)

PCB CoDesign

62134	Rule priorities were being inadvertently changed after a new rule was added.
62185	It was not possible to revert local changes when a local commit was not pushed.
62195	In some cases after using the Update from Server command, documents were not being reopened to present the latest data pulled from the connected Workspace.
62323	An error would be encountered when trying to merge a design that contained unions with duplicate names.

Constraint Manager

61643	From the Physical view (accessed from PCB), it was not possible to remove impedance-based width values, edit Preferred Width fields, or change the Impedance Profile constraint to 'No Impedance', after removing all Impedance Profiles from the Layer Stack Manager.
61754	With the 'Altium Dark Gray' theme active, the incorrect coloring was being used for the 'Constraint set intersection found' dialog.
61828	It is now possible to enable/disable basic rules defined in the All Rules view (when accessed from the PCB).
61832	Enhanced the entries and level of detail presented in the ECO dialog, when passing changes made to the Clearances Matrix.
61833	Improved presentation of the Clearances Matrix on the All Rules view (when accessed from the PCB), with all custom values now displayed as separate lines.
61834	Added an option to 'Apply zero Keepout clearance', as part of the Constraint Manager's 'Clearances Settings' properties.

Draftsman

60237	In some cases, it was not possible to save a Draftsman document (PCBDwf) using the regular save controls. (BC:9186)
61051	For a specific PCB design, some components on the paste mask layer, for a specific variant, were missing from the placed Board Fabrication View.
62373	In the Draftsman document of a specific design, the fills on a particular layer of a placed Board Assembly View were incorrectly rotated.

3D-MID Design

61575	Added the ability to edit a track by clicking and dragging on one of its vertices, and to create a new vertex by clicking and dragging part way along an existing track segment.
61984	Added support for the 'Net Color Override' feature when working with a 3D-MID document (PcbDoc3D).

Harness Design

59678	Introduced high-integrity harness design release management using the Project Releaser. (BC:23627)
61057	After updating a Workspace component in the Layout Drawing to its latest revision, its physical models would have their rotation reset to 0 if they had been previously rotated using the Spacebar.
61827	In a specific case, opening a HarDwf document that included a Wiring Diagram View or Layout Drawing View containing a text frame with an empty line, would result in the error "Object reference not set to an instance of an object".

Platform

57606	In some cases when accessing the Columns Editor for a TListView object in a scripting Form, an Access Violation (in module 'EditScript.DLL') would be encountered. (BC:21877)
61421	Updated text throughout the License Management UI to make it clear that subscription renewals are no longer available for perpetual licenses. After expiration, a perpetual license can still be used, but you won't have access to later updates for Altium Designer beyond that point (no new features/functionality), nor will you have access to cloud capabilities delivered through, and by, the Altium 365 platform.
62546	With the advanced settings option 'System.UseCefSharp123' ON, a crash would be encountered when opening a second instance of Altium Designer.
62555	In some cases after updating to Altium Designer 24.8, launching the software would result in the crash "An error occurred during loading dynamic resources" being encountered.

Data Management

56824	When using the Project Releaser, the revision of the Source Data set was incorrectly being used in the generated data of other data sets. (BC:18641)
61387	In some cases when adding a freehand drawing to an existing comment (e.g. on a schematic or PCB), the error "ImageBase64 must include mime type" would be encountered. (BC:23737)
61760	With Altium Designer set to use Japanese localization, attempting to switch the Component editor to its Batch Editing mode would result in the error "Could not convert variant of type (Null) into type (OleStr)".
61938	The ability to share a read-only snapshot of a Workspace project, hidden since Altium Designer 24.4, has been brought back in this release.
62014	When creating a new project in a connected 'On-Prem' server, an error would be encountered when trying to change the Repository Folder using the ellipsis (...) button.
62041	Added the ability to copy Workspace-side project-level parameters (on the Parameters tab of the Project Options dialog).
62141	In some cases when connected to an on-prem server and working with a project in an external Git repository, '401 errors' would be encountered and sometimes a lockout from that repository.
62177	Added the ability to view and modify parameters for a Workspace project template, when creating a new project in the Create Project dialog.
62600	When using the 'Component Database to Workspace Data Synchronization' feature, attempting to add a DbLib (connected to a MySQL database) to the .CmpSync document would result in an error being encountered.

Import/Export

58206	In some cases when defining Allegro library files to be imported through the Import Wizard, an Access Violation (in module "LoadAllegro.IWZ") would be encountered.
61722	When importing a specific Allegro design, the generated PCB document was empty.

Other

60385	In some cases, an Access Violation (in module "X2.EXE") would be encountered.
61005	In some cases when accessing a menu that included a network printer (using IPP protocol, port WSD set as default), an Access Violation (in module "X2.EXE") would be encountered.

Version 24.8.2

Build: 39 Date: 21 August 2024

Schematic

60624	In some cases, the error "Cannot set Visibility or call Show, ShowDialog, or WindowInteropHelper.EnsureHandle after a Window has closed" would be encountered.
61353	When using Board Level Annotation, a document channel set to not use 'Designator Index Control' had incorrect designator indexing applied.
61429	Parameter update settings defined in the Library Update Settings dialog (Item Manager advanced update options) were not being retained.

PCB

56711	The Interactive Routing tools now support the ability to configure and apply "Trace Centering", allowing for traces to be centered between obstacles as you route.
57986	Interactive Routing tools now support true "Zero Mitering". If the Miter Ratio = 0, no miter will be created (previously, a short miter fully covered by adjacent traces was created).
59164	Added a new 'Routing Neck-Down' rule enabling you to define the maximum allowed length of a Neck-Down trace when its width is less than the Preferred Width. (I:11512)
59341	Added the ability to create a single layer PCB, with corresponding support in the PCB editor, Layer Stack Manager and generated outputs. (I:10797)
59835	Added a round 'Donut' shape to the listing of predefined pad shapes available when defining the padstack. (I:18588)
60366	An 'Auto-Shrinking' option has been added to the Interactive Router (single-ended routing), allowing a trace to be narrowed to the applicable width in tight places as you route.
60618	After exporting a PCB to EDB format, opening the file in Ansys revealed arcs not to be very smooth in places.
61062	After importing a DXF file, attempting to select and convert all individual shapes into a single region (Tools » Convert » Create Region from Selected Primitives) would only convert one of them.
61083	When selecting holes through the PCB panel's Hole Size Editor, only one via from each selected group (in the Unique Holes section) was getting selected within the main design area. (BC:23361)
61208	For a specific design, Altium Designer would hang when running a DRC if the advanced option PCB.Rules.Width.CopperLoopsCalculation was enabled and when the 'Check Min/Max Width for Physically Connected' option was also enabled in a Width rule. (BC:23283)
61418	When using the Constraint Manager with a project, specific clearances defined for net classes were not being observed when interactively routing and dragging. (BC:23164)
61448	Different clearances were being applied between a component's SMD pads and a polygon pour if the SMD pads had their 'Plated' property incorrectly set to ON. (BC:20733)
61610	Removed the '[nOhm]' entry from the label for the Copper Resistance field (when configuring Layer Stack properties through the Properties panel). Value entered is in nΩ.
61729	When routing a differential pair between existing routed parts of the pair, it was not possible to end the route at any point on existing Diffpair track.
61748	The Interactive Router would ignore a closed region as being an obstacle, resulting in a dragged track (within the region) suddenly being pushed outside of it.
61916	In some cases when using the Automatic Length Tuning feature (with default parameters), the resulting tuning patterns would create short-circuit violations.
62025	For a Workspace component referencing a PCB Footprint with an empty Name, using the Update From PCB Libraries feature would show this as a failed match item and "Component Is Not Properly Linked And Synchronized. No Comparison Data Available."
62030	The feature to control whether or not drill symbols are automatically updated (live update) is now officially made Public with this release (OFF by default).
62232	When viewing a board in 3D, clicking to select a component would select the 3D body instead, presenting information for the latter in the Properties panel instead of that of the component.
62345	While interactively routing, it was not possible to change the Via Diameter or Via Hole Size through the Properties panel.

PCB CoDesign

61267

Added support for 'Copper Resistance' and 'Via Plating Thickness' parameters (defined as part of Layer Stack Manager properties).

Constraint Manager

57002	In some cases after successfully passing changes from the schematic to the PCB through ECO, accessing the ECO again would list the same 'Change Rules' actions.
59635	Values set (on the PCB side) for Min Width/Preferred Width/Max Width for inner layers were being reset to defaults, after executing an ECO to update the PCB with changes made on the schematic. (BC:23198)
60732	Added the ability to export and import constraints between designs.
60823	Some of the icons used within the UI were inconsistent.
61024	When accessing the Constraint Manager from the schematic, it is now possible to choose and configure specific width constraints (per layer) for any PCB document in the same design project, and independently across layer stacks defined for that chosen board. This applies when configuring Width and Differential Pairs Routing constraints (from the Physical view). (BC:23866)
61082	After saving a selected cell as a constraint set from the Clearances view (accessed from PCB), the constraint set was not being displayed after saving changes and then closing/reopening the Constraint Manager.
61195	In a specific case, changing a value for a cell in the Clearances view (accessed from PCB) and then clicking another cell, would result in the AV "The given key was not present" being encountered.
61200	The constraint UI for the Clearance rule when accessed from the All Rules tab has been corrected, now matching that seen from the main Clearances view.
61227	The command to access the Constraint Manager, from the Schematic side, has been moved up in the main Design menu to make it positionally similar to that on the PCB side.
61320	In some cases, changing the layer stack for a PCB and then accessing the (already open) Constraint Manager would result in the error "An item with the same key has already been added" being encountered.
61629	After changing the size of a room on a PCB and saving, making and saving any subsequent change in the Constraint Manager would result in the room being set back to its previous size.
61702	It is now possible to enable/disable advanced rules defined in the All Rules view (when the Constraint Manager is accessed from the PCB).
61791	By default, directives imported from read-only documents (device sheets, managed sheets) cannot be modified unless the 'Make Device Sheets in Projects Read-only' option is disabled (Data Management - Device Sheets page of Preferences).
61836	Added the ability to enable use of a chosen Impedance Profile, when configuring a Width or Differential Pairs Routing rule on the schematic side (through the Edit PCB Rule (From Schematic) dialog).

Draftsman

60961

In some cases after deleting merged cells in a placed table, the error "Index was outside the bounds of the array" would be encountered. The document could not be opened again if saved after this.

3D-MID Design

56593	The menus for the 3D PCB environment are now loaded correctly from the outset, without any manual configuration required.
61576	Added the ability to select and drag multiple components on the substrate.
61580	The name of (and full path to) the 3D substrate file is now presented in the Properties panel.

Multi-board Design

60594	After swapping pin numbers of a mated part, the net name of the System Connector and Mated part were not matching, making it look like two different nets were getting shorted together.
61035	In some cases, importing changes from a child project into the multi-board schematic resulted in the repetitive error "The Reference Pin is in the net" being encountered.
61479	Changes to Module Net naming was not preserved in the Connection Manager, nor visible in the Properties panel, but was transferred to child projects through the ECO process.

Harness Design

60593	Added ability to specify 'Strip Length' and 'Pull Off Length' when defining a crimp-type cavity in the Wiring Diagram. These properties are included in the wiring list and connection table objects in a HarDwf document.
60765	Added support for splitting a cable by adding splices to selected wires of the cable.
61137	'No Connect' objects placed within a Wiring Diagram were displayed with the generic 'NC' entry in the HarDwf's Wiring List and Connection Table, instead of real designator naming.
61331	Added the ability to display the text value for a layout label in the BOM.
61684	Added support for using commenting and tasks features in a Harness Draftsman document (.HarDwf).

Platform

61372	In some cases when changing the main monitor display (and with Altium Designer open with a Draftsman document active), the error "UCEERR_RENDERTHREADFAILURE (Exception from HRESULT:0x88980406)" would be encountered. (BC:20761)
61422	The 'Open Any Existing Document' button would disappear from the Quick Access Bar when connected to a Workspace.
61704	It was not possible to enter a space character in the Project Name field when creating a new project.
62073	With this release, Altium Designer switches from using .NET Framework 4.8 to .NET 6.

Data Management

60805	'History & Version Control' right-click context menu (Projects panel) updated with minor terminology changes and comparison commands in context with the document under the cursor when accessed.
61213	When cloning a component with defined part choice(s) in the Component editor's Batch Editing mode, the part choice data was not being included.
61216	For an opened Workspace design, trying to make a schematic or integrated library when not connected to the Workspace would result in the error "Access denied! User login required for this service". (BC:23254)
61299	The 'Save Project as Template to Server' command has been removed from the File menu for a Scripting project, since it is not applicable to this type of project.
61527	In some cases, using the Window » Close All command right after connection to a Workspace, would result in the error "Unable to cast COM object of type "System.__ComObject"...".
61604	It was not possible to assign a default OutJob document through the Defaults tab of the Data Management - Templates page of Preferences. (BC:23553)
61608	Added a new violation type 'Number of Pads exceeds Number of Pins' as part of the validation checks that can be configured for a Workspace component. (I:17154)
61692	When defining a Components Synchronization Configuration document (*.CmpSync) for Database to Workspace component synchronization, you can now map a database parameter to the Workspace component's Item ID.
61693	In some cases and for some suppliers, ActiveBOM was not able to find supplier data for file-based components with linked supplier data. (BC:23454)
61694	When batch releasing changes to components (Batch Component Editing), all components were being disabled for release by default, if a part choice for at least one had been changed through the preview window.
61941	It was not possible to choose the native Git repository as the target, when making a local project available on a connected Altium On-Prem Enterprise Server.
61973	In some cases when working with the Components panel, the following error would be encountered "System.AggregateException: One or more errors occurred. ---> System.ServiceModel.FaultException: Access denied! User login required for this service".
62277	In some cases when generating a report of exported comments through an OutJob, the error "Object reference not set to an instance of an object" would be encountered.
62367	When creating a new component in a connected Workspace, switching to Batch Component Editing mode would see the defined target folder path truncated to a maximum of '2 child folders' below the 'Components' parent folder.

Import/Export

58148	When importing a specific xDX Designer design, the 'Symbol name' parameter was missing for all imported parts.
60290	When importing an Xpedition design/library, support has been added for round 'Donut' pads.
60990	When importing an xDX Designer design, active low net labels were being imported as active high (net label negation was not supported), causing different nets (with same name) to be incorrectly connected.
61337	When importing a specific Allegro design (brd + dcfx), clearance values for Fill-Fill, Poly-Poly and Region-Region were incorrect, when compared to the 'Shape To Shape' value defined in Allegro.
61338	When importing a specific Allegro design (and dcfx file), the imported Routing Width rule referred to the physical CSet name instead of the actual Net name.
61803	When importing a KiCad v.8 design, designators were not being imported correctly on the generated PCB, instead appearing as 'Unx', which broke component linking to the schematic-side components.

Circuit Simulation

60625

In some cases when opening a project and the Simulation Dashboard panel was active, the error "ValueFactory attempted to access the Value property of this instance" would be encountered.

Other

56818

Altium Designer would freeze when connected to an Altium On-Prem Enterprise Server and attempting to publish custom extensions using the Altium DXP Developer interface.

Version 24.7.2

Build: 38 Date: 23 July 2024

Schematic

59542	In some cases when using Smart Paste to paste an object in an array, the row spacing value would lead to incorrect placement of the object in relation to defined columns for the array. (BC:22584)
60079	Added the ability to choose a component as an alternate part in a variant, without changing the symbol on the schematic or adding a footprint to the PCB. (I:4369, I:18678)
60725	Improved single/multi-part symbol handling. If a multi-part component only has primitives defined in one sub-part, the designator suffix is now hidden. No longer possible to select a sub-part (or alternate display mode) when that sub-part / mode is empty (has no primitives).
61121	Added a new 'Port with no matching ports' violation type to the Error Reporting tab (Project options) for detecting, in a flat design, a port that has no corresponding/matching port across source schematics. (I:5885)
61122	There was a visual bug with Port names on compiled sheets (and generated PDF output) in multi-channel designs not being displayed correctly. The channel suffix was being used, rather than taking the higher level naming.
61124	For a project using a managed sheet and a defined variant with an alternate component, running Board Level Annotation loaded the alternate as an additional component each time.
61214	In some cases when adding an alternate part for a variant, the error "Illegal characters in path..." would be encountered.
61659	In some cases, Altium Designer would 'freeze' when moving objects on schematics in a large design, and where the Properties panel was open.

PCB

59354	When entering a value (without units) for a pad's Corner Radius, the default unit was being unexpectedly changed, so the expected value (in %) would instead be added as that value in mil. (BC:23124)
59993	Extended the Return Path rule, with ability to specify a 'Max Stitch Via Distance', with Batch DRC support to flag a violation if this distance is exceeded. (I:12747)
60682	Introduced a new implementation of automatic loop removal in the Interactive Router, improving behavior in the case of any angle routing and laying the foundation for future enhancements.
61026	The Gap value, for a Clearance rule shown in the Applicable Binary Rules dialog, did not match the value defined in the Constraint Manager.
61037	With PCB.Pad.CustomShape.CornerRadiusAbsolute enabled, the corner radius (%) defined in a PvLib created with a previous version of the software (<24.3), would be displayed as 0%.
61054	In a specific case and where multiple design documents were open in a tiled style, a hard crash would be encountered when dragging a trace on the design's PCB document.
61055	Added 'Copper Resistance' and 'Via Plating Thickness' parameters to Layer Stack Manager properties, for inclusion when exporting into Ansys EDB format. 'Via Plating Thickness' also supported by the Power Analyzer by Keysight tool.
61086	In some cases when adding teardrops, an irregular shape would be generated where a trace entered a pad at an angle. (I:21090)
61201	In a specific case, import of a DXF file into a new PCB resulted in several source arcs having different start and end angles.
61209	Polygons were not being poured with the specified distance defined by the applicable Creepage Distance rule, when multilayer pads (TH Pads) were part of the nets covered by that rule. (BC:18273)
61262	For a specific design utilizing Advanced Rigid-Flex and nested regions, Top copper pads in a specific location on the board were absent in the generated Gerber files.
61290	In some cases when performing single-sided length tuning for a trace, an Access Violation (in module "RouterEntry.dll") would be encountered.
61316	With advanced option PCB.RigidFlex.SubstackPlanning OFF, exporting a PCB into Ansys EDB format would result in the error "External component has thrown an exception" being encountered.
61333	Using the Properties panel, it was not possible to apply a manual paste expansion to multiple selected pads. (BC:23117)
61399	In some cases when exporting to DXF format, polygons and copper regions were exported unfilled. (I:3918, BC:14157)
61480	The 'Absolute Value for Pad Corner Radius/Chamfer' feature is now officially made Public with this release.
61494	The values for unrouted net lengths (when browsing nets in the PCB panel) were displayed as 'n\a' for power nets.
61515	In some cases when exporting to DWG format (with 'Export with polylines' option enabled), slot holes were either incorrectly shaped or had copper on them. In other cases, slot holes were incorrectly round and pads incorrectly located (when offset from hole locations). (BC:20855)
62015	Right-clicking did not always end an interactive command in the PCB editor (e.g. routing). Note that this fix essentially reverts the fix for issue #60489, made in Altium Designer 24.6.

PCB CoDesign

60984	Added a 'Leave Feedback' control to the PCB CoDesign panel, allowing you to quickly send feedback directly to Altium Developers, with suggestions/issues related just to the PCB CoDesign feature.
61066	The appearance of the '!!' icon in the Action Required dialog was incorrect when using the 'Altium Light Gray' theme.
61067	The banner that appears at the bottom of the PCB document when in the 'Document is Out Of Date' state had a 'close cross' that was barely visible when using the 'Altium Light Gray' theme.
62040	In some rare cases, the PCB CoDesign panel would not show any differences to be merged, leading to changes already saved by one user being overwritten by those made by another.
62069	In some cases, an invalid revision would be saved to the server when multiple users pushed their changes at the same time, with one user getting the Git Error "Request failed with status code: 500".

Constraint Manager

59755	When accessing rule information from within the PCB (e.g. applicable Unary/Binary rule or violations for an object) the Constraint Manager will open with the applicable rule cell highlighted.
60073	The 'All Differential Pairs' scope present in the 'Electrical - Diff Pairs' view was treated as the 'All' one underneath and, thus, was completely unrelated to the 'All Differential Pairs' one present in the 'Physical' view.
60100	Changes made solely within the Constraint Manager were not being detected as having modified the parent project, with no offer to 'Save to Server' presented in the Projects panel.
60243	Added the ability to export and import constraint sets.
60324	Advanced Rules, supported only in the PCB-side Constraint Manager, would be incorrectly suggested as missing on the Schematic side during the ECO process from the PCB.
60997	A value specified in the All Nets - Min Width field (Physical view) was not being inherited by the child nets (those not having had a custom value already defined for them).
60999	There was a synchronization issue between having made changes in the Constraint Manager and subsequent changes on a schematic, where the latter were not synced and the Refresh button was grayed out.
61025	Added support for a global 'Ignore Pad to Pad clearances within a footprint' option as part of the Constraint Manager's properties, for quick application to all defined clearance rules.
61107	When editing the width rule for an entity on the Physical tab, the bottom table now supports single-click to edit a cell's value, as well as multi-cell editing.

Draftsman

60782	Improved performance when working with a Draftsman document whose source PCB has a high number of 3D models.
61199	Improved dragging of views within a document. You can now move views around without experiencing any detrimental lag.
61294	In some cases when trying to add a comment to a Draftsman document, the error "An item with the same key has already been added. Key: PageId" would be encountered. (BC:23752)

3D-MID Design

60898

For a specific design, dragging an antenna footprint over the substrate led to an Access Violation.

Multi-board Design

60731

The graphical line type defined for a harness on a multi-board schematic was not being faithfully reflected when viewing that document through the connected Workspace's Web Viewer.

Harness Design

59913	It was not possible to set the length for a bundle to be greater than 5454 mm.
60166	Added the ability to control what cavity information appears in a placed Connection Table within a HarDwf document.
60585	Pasted copies of a harness covering were not visible on the Layout Drawing, yet were actually there and were reflected in the ActiveBOM document. (BC:21690)
61307	Added support for using commenting and tasks features in a Harness Design document (Wiring Diagram and Layout Drawing).

Platform

60568	In some cases when updating an installation of Altium Designer and the update fails, a rollback was not performed, leaving the software in an inconsistent state.
61030	Starting from this release, all 'SOLIDWORKS PCB Connector' extensions are no longer available, as well as the duplicate 'MCAD IDX Exchange (Mechanical CAD Collaboration)' extension.
61143	In some cases when updating Altium Designer, the Installer asked to "Please close Altium Designer to continue" even though the software was not running, preventing installation.

Data Management

60640	Parameters defined in a project template are now visible when choosing to use that template, when creating a new project through the Create Project dialog. (I:14283)
61068	Default sizing and appearance of the Edit Templates dialog (accessed from 'Data Management - Component Types' preferences page) was incorrect when using the 'Altium Light Gray' theme.
61144	Coloring used for filtering UI elements in the Components and Manufacturer Part Search panels, when using the 'Altium Light Gray' theme, were incorrect.
61211	In some cases, attempting to download a Reuse Block through the Explorer panel would lead to the error "Failed to download documents. Invalid item revision URL" being encountered.
61245	In some cases, the Comment/Name field for an alternate part in a defined variant was empty in the ActiveBOM document.
61261	When making and saving changes to a shared Workspace project, an error dialog "Git Error - Please connect to target server first" would appear, even though the Workspace was connected.
61313	The dialog that appears when another user starts editing a soft-locked document had a 'close cross' that was barely visible when using the 'Altium Light Gray' theme.
61330	The command to 'Clone' an existing project has been renamed 'Make a Copy' throughout the UI.
61347	For a specific Workspace and design therein, the 'Manufacturer 1' and 'Manufacturer Part Number 1' fields were empty for alternate parts in the ActiveBOM. (BC:22884)

Import/Export

58143	When importing an xDX Designer design, you can now define substitution parameters for component mapping (Footprint, Designator, Comment and Description fields). If the first parameter does not exist, the next will be used, in sequence.
61021	When importing a specific OrCAD design, some components were being imported with their designators reset (U?) on the generated schematic documents.

Power Analyzer by Keysight

55264

Added support for the 'Via Plating Thickness' parameter, defined for the PCB as part of Layer Stack Manager properties.

Other

61071

For a specific Script project, attempting to change the properties for a selected control on the Form, using the Object Inspector panel, resulted in an Access Violation (in the EditScript module).

Version 24.6.1

Build: 21 Date: 18 June 2024

Schematic

59204	In some cases when pasting pins for a component in a SchLib and zooming in/out, the error "The parameter is incorrect" would be encountered. (BC:22466)
59709	In some cases, the error "Unable to cast COM object of type "System.__ComObject" to interface type "rt_basic.IInterfaceList"..." would be encountered.
59918	There was a rounding issue when comparing the Propagation Delay parameter and generating the ECO to update changes from the schematic to PCB. (BC:22226)
60729	When generating a PDF of project schematics through an OutJob, the order of the document bookmarks did not match the order of the sheets in the project itself. (BC:19044)

PCB

58250	Added an Advanced Settings option (PCB.Performance.UseRegionTriangulationCache) that, when enabled, improves performance of PCB loading by using regions triangulation cache.
59344	The Preview region of the PCB Layout Replication dialog has been enhanced with indication of when the preview for a selected target block is loading or updating.
59812	For a specific and large design, there was a noticeable lag when toggling visibility of various layers ON and OFF through the View Configuration panel.
60174	After annotating a schematic containing a placed Reuse Block, attempting to update the PCB with the changes would result in an Access Violation (in module 'ADVPCB.DLL').
60197	Added the ability to control whether or not drill symbols are automatically updated (live update), using the PCB.LiveDrillSymbols advanced settings option.
60489	There was a noticeable delay when starting to pan within the design space, when an interactive command (e.g. Move Object, Interactive Routing, etc...) was running.
60790	The 'Negative' attribute is now disabled for plane layers when exporting a PCB into Ansys EDB format.
60791	Added support for differential pairs when exporting a PCB into Ansys EDB format.
60792	Added support for net classes when exporting a PCB into Ansys EDB format.
60821	In some cases, clicking on a violation entry in the PCB Rules And Violations panel, directly after invoking the 'Run DRC Rule Class (<RuleType>)' command, would lead to an AV (in module 'ADVPCB.DLL').
60849	In some cases, there was a noticeable delay when placing a line in a PcbLib document.
60856	With PCB.Pad.CustomShape.CornerRadiusAbsolute enabled, a polygon poured around a Rounded Rectangular Pad had a distance less than that specified in the applicable Clearance rule, causing a violation. (BC:23225)
60877	After exporting a panelized PCB to Parasolid format, the file could not be opened in SOLIDWORKS.
61013	For a specific PCB design project, trying to add an ActiveBOM resulted in the error "Input string was not in correct format..." being encountered.

PCB CoDesign

60746

Added support for the detection of changes made to unions that have been created by different users, but have the same name.

Constraint Manager

59200	There was no support for Differential-Pair Classes in the PCB-to-SCH Engineering Change Order process.
60454	After removing a differential pair from the Physical view, its name still remained under the diff pair class until the Constraint Manager was saved and reopened.
60459	Objects were not being selected correctly in the Constraint Manager (accessed from the schematic) after enabling the Cross Select Mode in the SchDoc.
60460	After removing a class or differential pair, the Constraint Manager had to be saved and reopened in order to be able to use Import from Directives / Create Differential Pairs successfully again.
60582	Information in the Constraint Sets region of the Properties panel was barely readable when using the 'Altium Light Gray' theme.
60611	The 'All Net Classes' scope has been removed from the Clearances view, since it is functionally identical to the 'All Nets' scope.
60617	After defining a Same Net Clearance value for a net (Physical view, Schematic) and updating the PCB, updating the PCB a second time would result in an AV (in module 'WorkspaceManager.DLL').
60679	From the Physical view, it was not possible to change the value for Min Width for a rule when an Impedance Profile was being used.
60735	With Constraint Manager accessed from schematic and attempting to add a net to a net class (with the same name), the error "An item with the same key has already been added" would be encountered.
60778	After importing a design directive, any of its rules were still being displayed on the schematic itself, if the visibility of a rule was enabled prior to import.
60904	It was not possible to remove an optional rule from the 'All Nets' scope (in the Physical and Electrical views).
61012	When creating a new PCB design project, the 'Constraint Management' option is now disabled by default.

Draftsman

59535	It was not possible to access properties for a component in an Assembly view when near a Section view line. Double-clicking would select/update the Section view. Also, in some cases, selecting an Assembly view would cause the Section view near it to disappear. (BC:22765)
60475	In some cases, attempting to place a Board Isometric View into a Draftsman document would result in the error "Value cannot be null" being encountered.

3D-MID Design

58429	Added the ability to route along more 'natural' lines on the surface of the 3D substrate by using the new ‘UV’ Plane Kind for the alignment grid, whose gridlines follow the natural curves of the substrate.
59521	Added the ability to override snapping priority, making it possible to now snap to the grid when routing to/from an existing trace, rather than to that trace's centerline.
60657	Added support for placement of components onto a substrate, whose footprints contain not just pads, but also solid regions and/or fills.

Multi-board Design

58474

In some cases when trying to place a comment on a multi-board schematic, the error "Object reference not set to an instance of an object" would be encountered.

Harness Design

58698	For a specific design, attempting to import changes into the Draftsman document from the Layout Drawing would result in the error "Feature is out of the bounds of this quadtree node".
60498	When generating a BOM Violations Report from the ActiveBOM in a Harness design, duplicate designator violations were being incorrectly reported where a cavity included multiple elements (e.g. crimp and seal).
60584	The 'Where Used' feature of the Components panel did not support cavity components, cable and wire components that were used from the connected Workspace.
60592	In some cases, the Layout Drawing object in a Harness Draftsman document would not update with changes made in the source Layout Drawing document. (BC:21492)
60655	The coloring for a wire in the Wiring Diagram was not correct after replacing it with a Harness Wiring component (featuring multiple defined colors) from a connected Workspace.
61014	After selecting a Twist object in the Wiring Diagram, its associated objects were not being presented in the Properties panel.

Platform

60445	In some cases when working with the License Management view, the error "The calling thread cannot access this object because a different thread owns it" would be encountered.
60683	Added a new advanced settings option 'System.UseCefSharp123' to switch between use of CefSharp v.123 (option ON) and CefSharp v.97 (option OFF) for browser-related elements within Altium Designer (e.g., the Home page).
60848	Text in a selected cell on the System - Mouse Wheel Configuration page of the Preferences dialog was barely readable, when using the 'Altium Light Gray' theme.

Data Management

58487	Checking of Part Choices editing rights would fail if too many components in a connected Workspace were being simultaneously opened for editing.
59614	When using a Managed Schematic Sheet in a PCB design project, it would appear in the Projects panel using its Item-Revision ID, rather than its Name. (I:18534)
60318	For a specific connected on-prem Enterprise Server, intermittent and lengthy delays were being experienced when interacting with the Server through the Explorer panel.
60396	In some cases after closing a Configure dialog accessed through the Project Releaser, an Access Violation (in module "WorkspaceManager.DLL") would be encountered.
60427	Added the ability to promote favorite Filters for each component type in the Manufacturer Part Search panel.
60602	Added ability (for those with assigned operational permission) to preserve a component's current lifecycle state when releasing into a new revision.
60646	The hover text for the icon that appears in the Projects panel, when others are editing a document, now presents the names of all those collaborators.
60836	It was not possible to change a component in an ActiveBOM document with a chosen, different component from an available local library. (BC:23396)
60885	Some content generated through an OutJob would still be opened, even when the option to 'Open generated outputs' was disabled for the corresponding Output Container. (BC:23001)
60976	When editing part choices in the Component editor (batch editing mode), removing a part choice would not remove its header and adding a part choice would not reuse this empty header.
60981	When using part choices sourced from a custom part provider for a component, with identical ranking (and no supplier data), refreshing ActiveBOM would change the order of the solutions.
61016	Added the ability to use SiliconExpert data in the ActiveBOM for a non-Workspace project.

Import/Export

59103	When importing a specific OrCAD design, wires were being imported with incorrect parameters on the generated schematic documents.
60376	When importing a specific CADSTAR design and libraries, the generated SCHLIB document contained fewer components than in the original symbol library archive.
60377	When importing a Zuken CR-5000 library (*.ftf), a custom D-shaped pad stack was being imported as a region.
60550	Added the ability to import KiCad designs into Altium Designer that have been created using KiCad version 7 or 8 software. (BC:22290)
60637	When importing a specific Allegro design, stacked micro vias were being incorrectly substituted with thru vias. (BC:23081)
60752	When importing an Allegro design, 'Dynamic Etch' on internal planes was incorrectly imported as a region on plane layers, instead of a polygon on signal layers.
60774	When importing an Allegro design, a new option has been added to the Import Wizard to 'Import Plane Layers as Signal Layers'.
60899	In accordance with external rebranding, 'SiSoft' has been replaced with 'MathWorks' throughout the UI, as applicable.

Version 24.5.2 HotFix

Build: 23 Date: 22 May 2024

Schematic

51102	Using a partially transparent PNG-format image (for a logo, for example) would result in that image missing in generated Smart PDF output. (BC:18937, BC:20094)
58127	The 'R' accelerator key was incorrectly assigned to two commands on the Schematic editor's main Design menu ('Constraint Manager' and 'Create Sheet From Sheet Symbol'). (BC:22948)
59784	In some cases, an Access Violation (at address 0000000145FA1675 in module "AdvSch.dll") would be encountered.
60185	The ability to access Font Settings for a placed parameter set, through the Parameter Set dialog, would stop working.
60233	The 'Supply Nets' rule is now automatically added to each power net (net containing a power port or assigned Supply Nets parameter through a parameter set) during compilation.

PCB

55864	For a specific and complex PCB, it took a noticeably long time to delete a polygon pour, either from within the design space itself or from within the Polygon Pour Manager.
57426	Enhanced ODB++ generation, adding support for v7.0 and v8.1 (with rigid-flex layer subtypes) formats and a fix for backdrills, stopping in previous layer to that defined in LSM. (BC:17563)
58093	Added measures to prevent inadvertent mirroring of a footprint along its X/Y axes to Health Check Monitor, Footprint Comparison report and Update from Libraries tool. (BC:15849, I:19497)
58548	In some cases when generating ODB++ fabrication data, an EList error "Duplicates not allowed" would be encountered.
60210	For generated Board Stack Reports, the decimal symbol was missing (and no. of decimal places incorrect) for some columns. (BC:22485)
60258	Having been found, in some cases, to cause detrimental results, the 'Polygons on Planes' feature has been removed, along with its associated option (PCB.SplitPlanes.Pouring).
60270	For a specific PCB, the error "External component has thrown an exception" would be encountered when attempting to export into Ansys EDB format using the Ansys EDB Exporter.
60597	After loading a previously saved layer stackup file (with an added Impedance Profile), it was not possible to save it to the PCB (the 'Save to PCB' control was grayed-out). (BC:23094)
60621	In some cases, when the PCB editor was building connection lines for unrouted nets in relation to a placed hatched polygon pour, an Access Violation would be encountered.
60668	The PCB Layout Replication command will now be disabled on menus if no components are selected.

PCB CoDesign

59776	Added the ability to 'Update From Server' from within the PCB CoDesign panel, for a local PCB that is out of date compared to the latest revision in the connected Workspace.
59794	Changed the color of the notification banner that appears at the bottom of the design space.
59796	The VCS status of the file is now presented in the notification banner that appears at the bottom of the design space.

Constraint Manager

59083	Added support for creating xNets and xNet classes in the Constraint Manager, when accessed from the PCB.
59863	xSignals are now automatically created for 2-pin nets.
59952	After using the Search field, all defined classes were being expanded automatically.
60064	After making changes to the constraints for a Workspace project (from the PCB) and saving to the Workspace, a message about external file PCBDoc.CstrDoc was encountered. (BC:22912)
60240	Summary information now provided when importing directives. An imported directive now colored blue. When selected, constraint data from the Constraint Manager is displayed (Properties panel).
60298	When defining widths by layer for a selected entity in the Physical view (accessed from PCB), rows for layers not selected in a chosen Impedance Profile will now be hidden.
60441	Within the Physical view, the results of an applied search would be reset after creating a new Net Class.

Draftsman

51268	For a specific PCBDwf document, editing notes but closing without saving, would lead to an error being encountered.
59216	In some cases when working with multiple sheets in a Draftsman document, the error "Unable to add null value to collection" would be encountered.
60886	When generating Draftsman output through an OutJob, the chosen single variant was being ignored when the Data Source was set to 'All Draftsman Documents'. (BC:23250)

Multi-board Design

60422	It was not possible to save the parent multi-board project to the connected Workspace if one of its child projects also had changes that were not saved.
60488	The 'Draftsman Support for Multi-board Projects' feature is now officially made Public with this release.
60530	The command to place a wire on a multi-board schematic is now hidden by default (controlled by the MBS.PlaceWire advanced settings option).

Harness Design

57335	The Design Item ID and Source fields are now fully functional for the Shield object in a Wiring Diagram. (BC:22756)
59679	When defining wire color, only a single Color parameter is now used for visibility, whose value reflects the primary, secondary and tertiary coloring, where defined. (BC:20187)
59680	Support added for creating, uploading, editing and reusing Harness Wiring Diagram and Harness Layout Drawing templates in a connected Altium 365 Workspace. (BC:23050)
60161	Added a 'Type' field (Standard, Standard (No BOM)) to control inclusion in BOM for objects in the Wiring Diagram (wire, cable, shield) and Layout Drawing (covering, label). (I:22400)
60168	Added a new parameter 'Include Cut' to the wire object, allowing to control its inclusion into a Wiring List placed in a Harness Draftsman document.
60195	Rotating and underlining any text strings on the Wiring Diagram or Layout Drawing would cause filled circles to appear within the corresponding objects in the Harness Draftsman document.
61077	Changes to Twist/Shield designators (Wiring Diagram) and Connection Point designators (Layout Drawing) were being reset after saving and reopening the documents. Their position and visibility were also affected. In addition, the Bundle Length parameter (Layout Drawing) was being reset to its default position.

Platform

59831	Enhanced error dialog when saving a document and license connection has been lost through inactivity, providing access to the License Management page and further information.
59972	The Projects panel was not being refreshed after moving a document, if the advanced settings option WSM.ManageMissingFiles was enabled.
60352	The System - File Types page (Preferences) contained duplicates for LdrDot and WirDot, causing an issue when loading preferences from a connected Workspace (with 'Do Not Apply' set for File Types).

Data Management

51081	After placing a Point-type comment in the PCB Data view for a project in the Web Viewer, the PCB document in Altium Designer would show it incorrectly as an Area-type comment.
58632	In some cases while connected to a Workspace, Altium Designer would be unresponsive after waking a computer from a period of hibernation.
59481	Added support for pulling advanced parametric data for parts from Z2Data, to the Manufacturer Part Search panel, ActiveBOM and to all places where Part Choices can be accessed.
59576	SiliconExpert datasheets are now presented, for all components that have them, in both the Manufacturer Part Search and Components panels.
59761	Including *.PrjPcbStructure file in a commit would later cause conflicts when updating the project from the Workspace. Now added to the .gitignore list (unavailable to commit for new projects).
59774	Updated the Soft-Lock notification window that appears at the top-right corner of the PCB design space, highlighting that codesign and subsequent merging of changes is supported.
59775	The Edit Document dialog no longer appears when attempting to modify a local document and a later version of that document exists in the connected Workspace.
59777	An 'Update from Server' control now appears next to the project name in the Projects panel, when there are only outdated files in that project.
59793	'Push was rejected' dialog no longer appears when saving local changes to the Workspace with conflict. Outdated files are now auto-updated, then the Save to Server dialog displayed.
59899	If attempting to 'Save to Server' when conflicts still exist, the new 'Action Required' information dialog will be presented, listing the conflicting file(s) that need resolution.
59900	Clicking 'Save to Server' now pulls actual changes from the Workspace. When conflicts in the project would cause actual Git conflicts, file state becomes ‘Conflict Detected’ (marked with double red '!!').
59901	The context menu (Projects panel) available when file conflicts have been detected has been updated with more focused actions that can be performed, depending on the type of document.
60038	Added 'Open Remote Document Version' command (Projects panel VCS context menu) for a conflicting document. Opens latest document revision from connected Workspace in a new document tab.
60059	Original Library Link was incorrect in Variant Management dialog if connected Workspace had a dot char in its name, leading to wrong library dialog when using 'Update Values From Library'.
60180	After releasing content to a connected Workspace, the Components and Explorer panels would display the 'Release Date' in local time instead of UTC time.
60194	In a specific case and with non-default Preferences, attempting to create/open/edit/clone a component template would result in a 'Null reference' exception being encountered.
60206	Enhanced the 'Use Component Data' dialog with separate tabs for Parameters, Models and Datasheets. Data from SE/Z2Data, if requested, is listed first in each case.
60223	In some cases when creating a new Workspace component, the ID would be incorrectly generated, freeze during generation, or not be generated at all.
60235	For a Workspace component placed on a schematic, incorrect parameters were being displayed when viewing a variant (alternate part) for which those component parameters did not exist. (BC:22845)
60262	When opening a specific Workspace project, duplicated instances of the Workspace were being presented in the Projects panel.
60316	For a specific design (and while connected to a Workspace), the error "Failed to pull data" would be encountered when refreshing the project's ActiveBOM document. (BC:21509)
60355	For a specific component in a DbLib file, migration using the Library Importer would fail to import the defined part choice.
60367	It was not possible to change the order of libraries (Move Up/Down) on the Installed tab of the Libraries Preferences dialog.
60401	When right-clicking on the entry for a Workspace project in the Projects panel, duplicate workflow requests were being sent to the connected Workspace.
60423	When making a project available in a connected Workspace and its description was 256 characters, the subsequent error message did not state description length as being the error. (BC:23046)
60480	It was not possible to place any component manufactured by Wurth Electronics, from the Manufacturer Part Search panel directly into the active PCB document.
60481	With the ComponentSearch.UseForModelsBrowsing option enabled, a footprint selected for use in the Model Search dialog was not being added to the Workspace component being created.
60483	It was not possible to work with a Database Library that was connected to a 'split' MS Access database (split into front-end and back-end components).
60575	In a specific case, attempting to access the Library Importer, would result in the error "Unable to cast COM object of type 'System._ComObject'...".
60614	Added the ability to resize the 'Use Component Data' dialog. In addition, the 'Resulting Value' column now supports text wrapping.
60721	When opening the Variant Manager for a specific PCB design project, the error "Value cannot be null. Parameter name: collection" would be encountered.
60741	In some cases when releasing a single, new component to a connected Workspace using the Component editor, the error "Cannot find naming scheme" would be encountered.
60742	When editing a variant of a multi-channel design, an error would be encountered when setting the same part as 'Not Fitted' in more than one channel. (I:23282)
60832	Designator duplicates for components with different alternates would result in the error "An item with the same key has already been added", when opening the Variant Manager.
60908	With SiliconExpert enabled for the connected Workspace, opening a project's ActiveBOM document for the first time would fetch all SE data for components, using up quota.

Import/Export

59000	When attempting to import a specific OrCAD design, some of the schematic sheets were not being imported.
59428	When importing a specific Allegro design, text on the Bottom Overlay and Assembly Bottom layers of the generated PcbDoc was incorrectly aligned.
59439	When importing a specific Allegro design, one of the symbols in the drill table of the generated PcbDoc was incorrectly sized.
59500	When importing a specific OrCAD design, an incorrect graphic element was being displayed outside of the generated schematic sheet.
59516	When importing a specific OrCAD design, a rectangular graphic and associated text, placed around a grouping of resistors on a particular sheet, was missing in the generated SchDoc.
60378	For a specific Zuken CR-5000 library file (*.ftf), import would stop part way, failing to import all footprints contained within the library.
60379	When importing a specific set of Zuken CR-5000 library files (.prf, .cdf and .ftf), the majority of components (symbols and footprints) failed to import.
60380	When importing a specific Zuken CR-5000 ASCII schematic file (*.eds), the primitives on the generated schematic documents were shifted (origin mismatch).

Version 24.4.1

Build: 13 Date: 16 April 2024

Schematic

40974	For a specific design, performing a Board Level Annotation would take a considerable length of time, compared with earlier versions of the software.
59833	Improved support for alternate symbols for multi-part components. If component has sub-parts defined in alternate mode without any primitives, not placing them will no longer cause an "Unused sub-part" violation. (I:9891)
60248	After placing a WMF vector graphic file into a schematic document, the image was not visible.

PCB

57476	In some cases when working with the Layer Stack Manager, the error "System.NullReferenceException: Object reference not set to an instance of an object" would appear.
59017	It was not possible, through the Properties panel, to change pad/via shape, hole size, and get at controls for paste and solder mask expansion, when editing multiple selected pads (or vias).
59769	Saving a PCB Library containing a large number of rectangles would take a considerable amount of time, compared with saving it in an earlier version of the software. (BC:22652)
59854	The length (delay) for a net that is part of a defined Supply Nets design rule (or part of a net class used with such a rule) is no longer calculated.
59865	Setting Rotation to '0 Angle' or '135 Angle' for a Polygon Connect Style rule (Simple, Relief Connect), would revert back to '45 Angle' after saving/reopening the PCB document. (BC:16160)
59894	Added 'Obey Rules' option when removing necks less than a certain width (solid poly pour properties). Enabled by default for new polygons, takes value from minimum Width rule.
59902	After rotating the slot hole in a pad, the surrounding polygon pour was poured incorrectly, resulting in inconsistent clearance between the poly and pad. (BC:22581)
59909	The 'Prevent Self-Intersections' feature (check for self-intersections in a poly/region during both placement and editing) is now officially made Public with this release, OFF by default.
59910	The 'Rendering of Self-intersected Regions' feature (rendered in the same way as they will be exported to fabrication outputs) is now officially made Public with this release.
59978	For a specific design, overlapping TH pads for a panelized PCB were not being shown in generated NC Drill output.
60058	User-defined geometries for the component selection bounding box (following the PCB.ComponentSelection setting) now observed when moving a component in Push/Avoid Obstacles mode. (BC:7466)
60156	In some cases when working with fonts (on Properties panel) for a PCB opened in two instances of Altium Designer, the error "Object reference not set to an instance of an object" occurred.

Constraint Manager

59702	From the Physical view, a value entered in the top grid for a single Net/xNet (width), Diff Pair (width or gap), or parent class, will be propagated to all width/gap fields in the constraint sections below.
59825	After creating an advanced clearance rule, setting a value for the Copper to Copper cell, saving and reopening, additional columns were being added (Fill, Poly, Region) with that value.
59862	Added indication of sync status between a constraint in the Constraint Manager and equivalent defined in a directive, with the ability to import constraint data from a directive once only.

Draftsman

30590

Added support for placing a BOM Table into a manufacturing drawing created for a PCB design project (*.PCBDwf), presenting only those components that are Not Fitted. (I:7978)

CAMtastic

59817

After saving a document in a version of Altium Designer >= 24.1, opening it in a version of Altium Designer < 24.1 would result in an empty document. (BC:22784)

Platform

60182

In some cases, Altium Designer would 'freeze' when attempting to install the 'TASKING Pin Mapper provider' extension.

Data Management

58870	In a specific case with many projects opened in the Projects panel, noticeable delays were experienced due to all projects periodically refreshing VCS status and collaborator notifications.
59161	A new 'loading' indicator is now presented whenever (and wherever) you click to 'Get SiliconExpert Advanced Part Data'.
59572	Added support for references to SiliconExpert compliance datasheets to the Manufacturer Part Search panel.
59573	Added support for references to SiliconExpert compliance datasheets to the Components and Explorer panels.
59574	Added support for references to SiliconExpert compliance datasheets to ActiveBOM (*.BomDoc).
59575	Added support for references to SiliconExpert compliance datasheets when generating a BOM output (in PDF or Excel format) through an Output Job.
59697	When performing a 'Save to Server', checking a higher level box in the dialog would not recursively check all descendant child entries. (BC:22625)
59699	Added support for latest MS Access database file format (.accdb) when using Database to Workspace component synchronization (.CmpSync) and part supplier synchronization (.PrtSync).
59779	In some cases when opening components from the Explorer panel's Library Health view, the error "Object reference not set to an instance of an object" would be encountered.
59828	For a Workspace content type that can be directly edited, the Name of the item being created, cloned or edited is now shown, rather than its Item-Revision ID.
59932	The revision information for templates listed in the Create Project dialog was no longer being displayed.
59934	The real value for the YTEOL parameter is now presented in all places where SiliconExpert data is presented.
59939	In some cases when editing a Workspace component in Batch Component Editing mode, an exception would occur when attempting to add a part choice 'By MPN'.
59984	Removed 'Show Differences' and 'History & Version Control' menu entries from the right-click context menu (Projects panel) for document types that support direct editing.
60033	The Component Template Inheritance feature is now officially made Public with this release.
60089	For a specific manufacturer part, the value displayed for its SiliconExpert YTEOL parameter in the ActiveBOM was incorrect compared to that displayed in the Manufacturer Part Search panel.

Import/Export

58714	When importing a specific Zuken CR-5000 PCB, the board outline was missing from the generated PcbDoc.
59930	Added the ability to skip the inclusion of Pad/Via Template names when importing an Xpedition library file.
60163	For a specific imported OrCAD design, some graphical elements around components (e.g. rectangles and circles) were missing on the generated schematic sheets.

Version 24.3.1

Build: 35 Date: 19 March 2024

Schematic

58798	In a specific case, copying an existing schematic (with signal harnesses) for use in a new project would result in false 'conflicting harness definition' errors after validation.
59129	In some cases, the exception "This operation is not supported for a relative URI" would be encountered.
59207	The ability to access Font Settings for a placed parameter set, through the Properties panel, would stop working.
59306	A net label link in a note or text frame would not work if the target net label was present on multiple schematic documents in the project.
59378	For a specific design, running 'Update PCB' multiple times would lead to the ECO repeatedly detecting changes, but applying them to different connector components on the PCB.
59379	Sorting by Designator in the Symbol Wizard was not sorting correctly by value, resulting in (for example) '1, 10, 11, 2, 3...' instead of '1, 2, 3,...,10, 11'. (BC:21550)
59380	Pasting a circuit fragment from the Clipboard panel into a schematic would result in an image, rather than the original copied objects. (BC:22489)
59686	When running the Make Schematic Library command from a schematic using managed components, the error "An item with the same key has already been added" would be encountered.
60060	When opening a previous VCS Revision of a schematic from the Storage Manager panel, the error "object reference not set to an instance of an object" would be encountered. (BC:22890)
60124	After clicking on the 'Edit Supplier Links' button in the Part Choices region of the Properties panel, the error "Object reference not set to an instance of an object" would be encountered.

PCB

57622	Added the ability to define pad corner radius/chamfer as an absolute value. (I:2808)
57679	Enhanced the preview and parameter placement for the Sawtooth tuning pattern UI in the Properties panel, to bring greater clarity.
59016	When editing certain objects (e.g. polygon pour, via stitching), the blue action bar that appears in the Properties panel would cause all other elements to move downward.
59058	For a panelized PCB, generation of Gerber/Gerber X2 data was incorrect if the 'Merge regions and pads inside Footprint' option was enabled. (BC:21351)
59102	The padstack naming with respect to solder/paste masks in pad/via templates was incorrect. (BC:22597)
59253	Enhanced error notifications when using the Layout Replication tool, with detection for a missing pin connection in the selected Source Block, with cross-probing to aid in fixing.
59345	When running the PCB Layout Replication tool there is now indication that replication is being performed, with the possibility to cancel out of the process.
59432	In some cases, placing a reuse block/snippet in a PCB document (directly or synced from schematic) would result in an AV (in module 'ADVPCB.DLL') being encountered. (BC:22616, BC:22934)
59441	In some cases when generating ODB++ output through an OutJob, individual polygon pours and regions were being merged as a single surface polygon object.
59473	For a specific design, running the Board » Create Primitives From Board Shape command would result in an AV (at address 00007FFBDC93DE96 in module ‘Altium.PCB.DataModel.X.dll').
59582	In some cases, the Interactive Router would occasionally create violations with pads defined with an advanced pad stack.
59596	When accessing a design's layer stackup (Layer Stack Manager) and that stackup contained defined Impedance Profile information, the PCB document (and project) would be marked as modified.
59615	When copying TrueType Font text objects between PCB documents, an Access Violation (at address 000000015FCC7460 in module "ADVPCB.DLL") would be encountered.
59674	After clicking Replicate in the PCB Layout Replication dialog, the cursor now indicates 'in progress' before the first block is placed (or ready for placement in interactive mode).
59753	For a specific design, an Un-Routed Net rule violation was not being detected for a hatched polygon, where two polygons with the same net overlapped.
60076	The Copper Offset value defined for a Multi-Layer component pad was being removed when flipping the component to the bottom layer.

Constraint Manager

58890	A new Diff Pairs tab is now available from the Electrical constraints view, for explicitly defining and managing Differential Pairs.
58977	Added the ability to import constraints from design directives, placed and defined on your schematic source documents.
59105	It was possible to add/remove layers for clearances (from the Clearances and Physical views) while in 'View Only' mode.
59107	When adding a new net class to an xNet on the Physical tab, the wrong icon (xNet) was being used. Additionally, the wrong icon (Net) was then being used for the xNet.
59296	A Creepage rule can now be specified when defining electrical clearances between classes of nets and/or differential pairs using the matrix in the Clearances view.
59321	If one of the nets in a diff pair was removed from the schematic, the error "The given key was not present in the dictionary" would be encountered in the Constraint Manager's Physical view.
59492	Changes to a PCB's layer stack were not being detected by the Constraint Manager, resulting in the Refresh button remaining disabled.
59496	Added support to the clearance matrix for multi-editing within a selected row/column.
59552	Changing Units within the Constraint Manager was not being saved, reverting to defaults (used by either schematic or PCB) when closing and reopening the Constraint Manager.
59963	In some cases when working with the Constraint Manager, the exception "An item with the same key has already been added" would be encountered.
59979	In some cases when working with the Constraint Manager, the exception "The given key was not present in the dictionary" would be encountered.

Draftsman

57915	Added the ability to change resolution for a placed Board Realistic View, when creating a manufacturing drawing for a PCB design (*.PCBDwf). (I:11137)
58374	In a PCBDwf document, the Isometric View had incorrect dimension values compared to those of the Assembly View. (Requires re-import from PCB and replacement of dimensions). (BC:13032)
59106	In some cases when selecting a placed comment, the exception "Object reference not set to an instance of an object" would be encountered.
59121	With a BOM Table selected, the visibility (eye) icon, on the Columns tab of the Properties panel, was stretched disproportionately.
59248	In some cases when deselecting a region object, the exception "Object reference not set to an instance of an object" would be encountered.
59316	With a BOM Table selected, it was not possible to edit an Alias cell on the Columns tab of the Properties panel. (BC:22477)

3D-MID Design

58764	The Parameters listing in the Properties panel has been cleaned up to remove those not applicable to a 3D-MID document (*.PcbDoc3D).
58765	The Health Check tab of the Properties panel has been cleaned up to remove those elements that are not applicable to a 3D-MID document (*.PcbDoc3D).
59427	Regions are now respected by connection line visualization.

Harness Design

58097	Added visibility and locking controls for the Length parameter, in the Properties panel for a selected bundle object on a Layout Drawing.
58329	For a Layout Drawing View placed in a HarDwf document and where the Physical models for connectors are displayed, it is now possible to add callouts displaying the cavities.
58533	With a harness connector selected on the Wiring Diagram or Layout Drawing, clicking the Edit Supplier Links button in the Properties panel did not give access to the Supplier Links dialog.
58620	The Length column in the ActiveBOM and BOM Table (HarDwf) now presents the total length for wire and cable rather than individual lengths. (BC:21689)
58683	In the Harness Draftsman document, the Length column in a Wiring List and Connection Table now shows the wire length for each individual wire in a cable.
58772	Added ability to specify a crimp/seal/plug or other cavity part for each required pin of a Harness Component in the Wiring Diagram.
58828	The overall length for a cable in a BOM Table placed in a Harness Draftsman document would show zero, when its constituent wires terminated at different ends.
58949	All bundles containing wires from a split cable are now highlighted on the Layout Drawing, when the cable is selected (in the Bundle Objects region of the Properties panel).
59232	Added support for the Twist designator to the Wiring List in a Harness Draftsman document.
59290	Added support for the presentation of seals, plugs and other cavity parts, in a Wiring List and Connection Table placed in a Harness Draftsman document.
59329	In the Harness Draftsman document, the 'Board Detail View' has been renamed to 'Harness Detail View'.

Platform

59288	In some cases, the exception "Unable to cast COM object of type "System.__ComObject" to interface type "RT_LicenseManagement.ILMUserInfo"" would be encountered.
59351	In some cases when preparing a project for release using the Project Releaser, GDI handle usage would become very high and sometimes lead to Altium Designer crashing.
59375	To make it easier to 'grab' a pinned/unpinned panel's edge for resizing, the width of the vertical strip ('splitter') has been increased to 6px.
59404	In some cases, an Access Violation (at address 000000140013806A in module "X2.exe") would be encountered.
59620	From the new License Management page, when attempting to use the legacy Private License Server or a specific standalone license, an error would be encountered. (BC:22801)

Data Management

51744	In an OutJob, when attempting to preview a Print Job with 2+ outputs assigned, an AV (at address 000000010EA95777 in module "WorkspaceManager.DLL") would be encountered. (BC:22589)
58162	Added support to ActiveBOM for a range of checks based on SiliconExpert parameters, available in the 'Violations Associated with Part Choices' category of the BOM Checks dialog.
59048	When exporting comments to PDF, the status for resolved simple comments (those not assigned as 'tasks') is now included in the export.
59148	Added support for custom pricing to be presented, where applicable, in ActiveBOM and all places where Part Choices are accessed.
59235	When using the Components panel's file-based libraries search feature, it was not possible to filter or sort the search results for footprints. (BC:21839)
59236	When creating a symbol as part of a component (through the Component editor), its defined Description was being replaced by a copy of its Name, when saving the component to the Workspace.
59388	The text 'each' has been removed from the presented price, in all places where Part Choices can be accessed.
59416	Running the 'Update Whole Project' command resulted in the Git error "conflict prevents checkout", when a document with the same name (not under VCS) existed in the local project's folder.
59442	For a specific PCB design project, opening its ActiveBOM document would result in a "List index out of bounds" error being encountered.
59557	An error would be encountered when attempting to group columns on the Search tab of the Explorer panel. (BC:22636)
59568	When attempting to download a specific component (in a particular Workspace) from the Explorer panel, an Access Violation (in module 'X2.EXE') would be encountered.
59569	When downloading a component from the Manufacturer Part Search panel as a 'File Library', the compiled IntLib is now included as part of the Zip file.
59581	For a specific design, attempting to open its associated ActiveBOM document would result in the error "Definition not found: se-lead-free" being encountered.
59616	When creating/editing a component, if all footprints and part choices were removed and a new part choice added, the Use Component Data dialog would open with an error. (BC:22678)
59665	When creating/editing a component (in Single Component Editing mode), not all defined Component Templates for the connected Workspace were available on the Template drop-down menu.
59881	With the UseServerItemHRIDGenerator option enabled, attempting to release a new Reuse Block to the connected Workspace would result in the error "Failed to get new HRID from server".

Import/Export

54749	In some cases, the error "Teigha.Runtime.Exception: eNotThatKindOfClass" would be encountered.
57688	When importing an Xpedition design using the Import Wizard, support has been added for pad corner radius/chamfer defined as an absolute value.
58936	When importing a specific Zuken CR-5000 PCB, the board shape was not being imported into the generated PcbDoc.
59447	Defined pad hole tolerances are now included when importing an Xpedition library.
59452	Added support for 'Round Donut' pad shapes defined in a footprint when importing an Xpedition library.
59502	In some cases when importing an Xpedition library, the sizing of component pin numbering text on the top silkscreen/overlay was not the same as the original source.
59505	When importing a specific xDX Designer library, some component symbols were not visible (very small) in the resulting SchLib.
59559	Added support for zero-width lines defined for a footprint on the Placement Outline layer when importing an Xpedition library.
59599	When importing an Xpedition library, NO-SP (No Solder Paste) footprints were being generated containing solder paste.
59600	Added support for replicated text strings in footprints (e.g. mounting hole 'A's) when importing an Xpedition library. Original string, its replicates and associated parameters are imported.
59643	When importing an xDX Designer library, symbol pins with type 'Power' or 'Ground' would be incorrectly assigned the 'Passive' type in the resulting SchLib.
59696	When importing a Zuken CR-5000 PCB, the layer mapping was not getting reset to defaults, instead using the mapping from the previous import.
59700	For a specific imported Xpedition library, attempting to change the template used for a selected pad in a particular footprint would result in an empty pad (no shape).

Circuit Simulation

54523	The cross-probing feature between the Sim Data viewer and source schematic documents was no longer functioning.
58968	Added the ability to run an analysis of S-parameters (scattering parameters).
58993	Added Preferences option 'Enable Simulation Generic Components library' to control its visibility in the Components panel and removed it from the Installed tab of Libraries Preferences dialog.
59217	Added support for creating a model based on another model, using the LTspice AKO model keyword.
59218	Added support for the use of the TEMP keyword in constant parameters, for temperature analysis.
59444	When viewing simulation results involving waveform plots, the Y value for the cursor's coordinates was not reflecting the cursor position, instead showing only the bottom value for the plot.
59457	When generating the simulation netlist, all statements within the '.control' block had their initial letter duplicated, causing failed analysis results and warnings.
59491	Added the ability to present SPICE models within the Components panel, where such models are located in the SPICE Models folder specified on the Simulation – General page of the Preferences.
59704	Use of the 'LPNP' model in LTspice syntax would result in 'unknown model' errors and simulation failure.
59720	The pin mapping for the DPDT Relay and SPDT Relay components (in the Simulation Generic Components library) was incorrect.
59822	Added a folder of Analog Device's SPICE models to the Mixed Simulation extension's installation Library folder (\Extensions\Mixed Simulation\Library\SPICE Models\Analog Devices).
59834	In some cases when printing tabular output from the Sim Data viewer, the last row in the table would not be included.

Power Analyzer by Keysight

59583

When changing the default load value, subsequent analysis of a net would fail, with the 'Something went wrong' message being encountered.

Version 24.2.2

Build: 26 Date: 15 February 2024

Schematic

51525	There was a noticeable performance impact when moving/dragging objects on a schematic if large bitmaps had been placed.
58235	With the cross-selection feature enabled, selection of an area on a schematic sheet would be delayed, noticeably so when selecting larger areas.
58609	In some cases when annotating components, the error "EOleException: Object reference not set to an instance of an object" would be encountered.
58836	In some cases when running a validation, the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered.
58837	In some cases, an Access Violation (at address 0000000149D1BE14 in module "AdvSch.dll") would be encountered.
59360	With the Properties panel open and pinned, there was a noticeable delay observed when selecting a note or text frame that included an active link. (BC:22546)

PCB

49483	Significantly improved overall routing performance in rigid-flex designs.
55827	Performance when restoring shelved polygon pours (with the options to automatically repour polygons enabled in Preferences) would be considerably reduced.
56005	Added Common Mode Impedance (Zcomm) as part of the Simbeor-calculated transmission line data, when defining an Impedance Profile for use with diff pair routing rules. (I:11503)
56283	For a specific PCB, minimum width violations were not always being detected. Added option PCB.Rules.Width.CopperLoopsCalculation to improve calculation of width of copper loop segments.
58677	The Miter parameter for a tuning pattern is now used instead of the general interactive routing Miter Ratio, when connecting an accordion to a trace. (BC:22293)
58845	The PCB Layout Replication tool now provides the ability to manually map components in target blocks, where multiple components have been detected by the tool as having similar connections.
58974	Optimized performance when rendering blind vias.
59080	With the 'Altium Light Gray' theme enabled, text was illegible in the Altium Material Library dialog when adding a new user material, or editing an existing material entry.
59143	With the Properties panel open, pinned and its Health Check tab active, there was a noticeable delay observed when starting to move any object on the PCB document.
59280	The Section View feature is now officially made Public with this release.
59282	The EngineX features (enhanced Clearance Rule, Expression Engine and DRC implementations) are now officially made public with this release, enabled by default for improved performance.
59327	When interactively routing using the Diff Pair Router (Any Angle), a crash would be encountered when a Diff Pair Routing rule was missing.
59385	A placed special string (using a TrueType font) was being displayed as truncated in the design space after having changed the value for its parameter in the Project Options. (BC:22559)
59402	There was a noticeable delay observed when interactively routing from a pad of a BGA component and the Width_BGA design rule was enabled.
59592	For a pad and polygon in the same net and the pad's hole size >= copper size, the polygon would be poured incorrectly (to the edge of the pad) when PCB.Rules.HoleClearance option enabled.
59652	With the PCB.Text.TTFontSaving option enabled, a placed text frame, rotated by 360 degrees and set to use TrueType font, could not be selected after closing and reopening the PCB.

PCB CoDesign

59244	For comparison results, the Via Stitching and Via Shielding entries can now be found under the 'Other' category in the PCB CoDesign panel.
59426	For a specific case, merging changes led to the exception "This implementation is not part of the Windows Platform FIPS validated cryptographic algorithms".

Constraint Manager

58854	For the Via Style rule, the ability to add a via template is now disabled if there are no defined via templates on the PCB side (through the associated Pad Via library).
58862	When creating a new project with the Constraint Management option enabled, the 'Rule Wizard' entry is no longer presented on the PCB editor's Design menu.
58927	It is now possible to transfer constraints, defined on the Physical and Electrical views, from the PCB to the Schematic through the ECO process.
59297	Hole-to-Hole clearance is now ignored when entering values into the Clearance matrix.
59603	Altium Designer would 'freeze' after clicking on a cell value for an added Board Outline Clearance rule, on the Constraint Manager's All Rules view (when accessed from the PCB). (BC:22674)

Draftsman

57713	There was a noticeable lag when changing selection between different types of object on a Draftsman document, and when deselecting (by clicking away from objects). (BC:21860)
58709	The Bookmarks panel is now available for use with a Harness Draftsman document (.HarDwf) and Multi-board Draftsman document (.MbDwf).
58931	When using a special string that calls for a document parameter that is driven by a project parameter (nested parameters), the special string was not being converted. (I:19218)

CAMtastic

59081

When exporting ODB++ data to a PCB file, blind vias in the same x,y position on different layers were being incorrectly exported as thru-hole vias.

3D-MID Design

58021

When exporting, the name of the entry on the File » Export menu has been changed from '3D Layout' to '3D-MID'.

Harness Design

53125	Added support for transferring multi-part component data from the Wiring Diagram to the Layout Drawing.
53943	Various UI elements have been cleaned up to remove many features and controls not applicable to Harness Design.
55033	Added support for multi-colored (striped) wires, with the ability to define primary/secondary/tertiary and border colors as part of a wire's parameters. (BC:20187)
56387	Shield Wire, defined in the Wiring Diagram as part of a Shield with a connection, can now be terminated at the connection point in the Layout Drawing.
57408	When defining properties of a Wiring List object in a Draftsman document, the Columns tab now has Move Left/Right buttons and an Order column, similar to that for a BOM table.
57409	When defining properties of a Connection Table object in a Draftsman document, the Columns tab now has Move Left/Right buttons and an Order column, similar to that for a BOM table.
58016	In some cases when dragging a wire on a Wiring Diagram, wire optimization would fail with a wire being split, especially if the wire was connected to pins and had visible parameters.
58062	When creating a new harness wiring component involving a cable/shield object around wires, the wires were not highlighted when the cable/shield was selected in the Harness Wiring editor.
58468	On the Layout Drawing, bundles were not being automatically merged after removal of an intermediate connection point.
58756	When generating a PDF from a Wiring Diagram/Layout Drawing using Smart PDF, any designator links defined within text frames and notes would not function when clicked.
58759	When generating a PDF of a Wiring Diagram only (using Smart PDF Wizard), color mode options were only available for/applicable to the Layout Drawing, on the Additional PDF Settings page.
58761	Parameters defined at the component level for a harness wiring component (created as part of a Workspace Library) were not present after placing the component into a Wiring Diagram.
58773	On the Wiring Diagram, the Duplicate Designator warning for Cable/Shield/Twist designator has been removed. This can now be split and used in different places using the same designator.
58778	If a twist/shield is associated to wires in multiple places on the Wiring Diagram (using same designator), selecting a twist/shield instance will highlight all associated wires in the group.
58838	After splicing an existing wire on a Wiring Diagram and performing annotation, the resulting wires were not being annotated.
58929	The HarDwf document now supports multiple Wiring Diagram documents in the same project, enabling you to choose from which document a placed view should be generated (and updated from).

Platform

58558	In some cases, an Access Violation (at address 0000001400137E7A in module "X2.EXE") would be encountered.
58860	Various color changes have been made to the Altium Light Gray UI theme, aiding to improve the contrast of the interface.
59055	In some cases, SSO login through the Altium Designer Installer was not possible with a certain number of characters entered in the 'Your Business Email' field.
59243	When accessing the License Management page, an exception would be encountered if licenses were present with the same S/N or Activation Code.

Data Management

57934	If a category was pre-chosen in the MPS panel, browsing to a component (in Components and Explorer panels) and using the Part Choices menu to open it in the MPS panel, would not find the part.
58418	When connected to an Enterprise Server (v6.0.5), Item IDs are now generated by the server in batch mode for all selected components in the Component editor (in Batch Editing mode).
58469	The Save to Server dialog was not presenting files that had been deleted outside of Altium Designer (through a Windows operation).
58635	Added support for SiliconExpert 'Product Change Notice' to the Manufacturer Part Search panel and to all places where Part Choices can be accessed.
58726	Improved VCS performance when opening large, multi-year design projects.
58843	When downloading a specific component (R7F7015813AFP-C#AA3) as a file library from the Manufacturer Part Search panel, only one of its three associated footprints were being downloaded.
58864	When connected to an 'on-prem' Workspace, the 'Make Available on Server' command was available from the Project menu when no projects were actually open.
58891	'Free' SiliconExpert parameters (Lifecycle, YTEOL and RoHS Status) are now presented by default in the Manufacturer Part Search panel and all places where Part Choices are presented.
58896	SiliconExpert parameters are now supported in the 'Selected Part Details' region of the Manufacturer Part Search panel, when comparing two selected parts.
58939	Added support for aggregated lifecycle information to an ActiveBOM solution added as a Manufacturer Link, whenever multiple data providers are available (Octopart, IHS Markit, SiliconExpert).
58944	Components panel UI changes. For the root node, 'All' is used instead of Workspace name. When a child category is chosen, the root node is no longer reflected in the full category path.
59040	Added ability to use just 'Free' SiliconExpert parameters (Lifecycle, YTEOL and RoHS Status) in ActiveBOM.
59128	When opening a Git-based project from a remote repository, the Commit command has been added back to the right-click History & Version Control context menu. (BC:22629)
59132	Running the 'Update Whole Project' command resulted in the Git error "conflict prevents checkout", when a document with the same name (not under VCS) existed in the local project's folder.
59199	When adding multiple alternates to a BOM component, including one already added elsewhere, the subsequent Warning dialog would lead to the other valid selected alternates not being added.
59201	It was not possible to add the same alternate part to more than one alternative group.

Import/Export

58055	When importing a specific Allegro design file, power planes were being imported with copper islands inside.
58998	When importing an Xpedition library, footprints with differing 3D Body heights are now uniquely named (based on height). Height values for footprints are sourced from existing CSV file(s).
59303	For an Xpedition library whose schematic symbols (only) were previously imported, you can now choose to import footprint models into a PCBLib as part of the existing project structure.

Circuit Simulation

58988	When running an OP analysis with TF for a specific design, the resulting chart 'Transfer Function' was empty.
58989	When running an AC analysis with Noise for a specific design, the resulting charts 'Noise Spectral Density' and 'Integrated Noise' were empty.
58990	The stress model (and parameters) defined for a sim model in a library/Workspace was not being recognized when assigning that model to a schematic component through the Sim Model dialog. (BC:22594)
58991	When assigning a sim model (with no defined stress model) in a library/Workspace to a schematic component through the Sim Model dialog, the 'Unknown' stress model type was not being saved.

Version 24.1.2

Build: 44 Date: 16 January 2024

Schematic

58010	It was not possible to change font size from '9' to '10' in the SCH List panel.
58013	The IsComment query keyword was not working in the SCH Filter panel.
58169	Added ERC violation types to detect when a wire/bus/signal harness connects to edge of harness connector, but isn't connecting to a harness entry, and to detect unconnected harness entries.
58445	When performing project validation, objects not aligned to the current snap grid were not being detected.

PCB

53006	Enhanced performance of the interactive router when pushing obstacles (Walkaround, HugNPush, Push) on boards with a complex border outline.
56171	In some cases when opening a PCB document in a separate window, a catastrophic error (in module 'ADVPCB.DLL') would be encountered.
56217	Added ability to automatically store geometries of text objects using TT fonts inside of PCB documents. Streamlined choice of replacement font(s) for missing TT fonts, for textual entities.
57719	Improved hole clearance detection for the Clearance rule, now checking clearance to the pad hole in case the pad has no annular ring (pad hole is greater than or equal to pad diameter).
58373	For a PCB with two flex layer stacks defined on one branch, the Layerstack visualizer (with 'Show full stack' enabled) showed an offset between the second flex and main rigid stacks.
58416	Custom-shaped pads were not exported correctly when generating a DXF file. Also, pad shape information was lost on export if the Select Corners option was enabled. (BC:20855, BC:22045)
58482	PCB.Pad.CustomMasks ON, changing Corner Radius of rounded/chamfered rect. pad would not stick in Properties panel. Top Paste Expansion field missing for non-signal layer pads. (BC:22161)
58519	Stacked thru-hole pads and vias were generating duplicate drill holes in a generated NC Drill file, which was then inconsistent with the PCB's Drill Table.
58605	After running the 'Remove Unused Pad Shapes command, any waived electrical clearance violations would become un-waived.
58607	When generating Gerber files with the PCB.Pad.CustomMasks option enabled, bottom Solder Mask and Solder Paste Gerber layers were missing information.
58665	Usability improvements made to the UI for the Pad Stack region of the Properties panel, when a pad is selected in the design space. (BC:22114)
58787	Added controls to quickly expand/collapse all Target Blocks in the PCB Layout Replication dialog.
58810	Stacked thru-hole pads and vias were being incorrectly included in generated ODB++ outputs, which was then inconsistent with the PCB's Drill Table.
58847	Added controls to quickly select all Target Blocks in a category (NO ROUTING, ROUTING DETECTED) within the PCB Layout Replication dialog.
59087	Solder and Paste masks for component pads were absent after creating a PCB library from the PCB document, using the 'Make PCB Library' command. (BC:22437)

PCB CoDesign

58400	With 'Show on PCB' enabled, you can now highlight all changes in a specific category, when that category is selected in the PCB CoDesign panel's Changes list.
58541	After a merge, the PCB document will remain in the 'Merged' state (in the Projects panel) until there is a new conflict. Local changes will no longer change the state to 'Modified'.
58832	Added support for comparison of, and application of changes to, unions (defined groupings of primitives on the PCB).

Constraint Manager

58334	Added a column for line numbers to each tab/grid within the interface.
58447	When defining a custom topology, an xSignal is now proposed for each distinct 'Source to Destination' combination.
58448	When defining a custom topology, the proposed xSignals are now presented in a structure reflective of 'Source to each Destination' (S-T) and 'Destination to Destination' (T-T).
58449	When defining a custom topology, xSignal names (in the proposed listing only) are now presented in the format <SourceNetName> (<SourcePinDesignator> → <DestinationPinDesignator>).
58763	Improved class selection from the context menu when adding selected net(s) to a target class.
58788	Without Altium Designer Pro/Enterprise Subscription, the Constraint Manager will present in 'View Only' mode, with the ability to see, but not modify, defined constraints.
58852	When creating a new project, you now have the ability to control whether it will use the Constraint Manager or older Design Rules system.
59223	In some cases when attempting to access the right-click context menu from the Constraint Manager's xSignals tab, a cyclic crash would be encountered.
59286	In some cases, and with the Constraint Manager enabled, the PCB document was opening empty (no primitives presented).

Draftsman

49636	Sometimes when working with Draftsman, the error "System.IndexOutOfRangeException: Index was outside the bounds of the array" would be encountered.
58476	Component designators in a placed Board Assembly View were being reset to their defaults after importing changes made to designators on the PCB.
58846	There was a noticeable delay with presentation of information in the Properties panel when deselecting objects to access document options, giving reduced performance.

3D-MID Design

58517

The length for selected track is now correctly calculated (and therefore also Delay) in the Net Information region of the Properties panel.

Multi-board Design

56072	Added support for the addition and use of a Draftsman document with a multi-board project. (I:13991)
56738	For a specific multi-board schematic document, it was not possible to make a connection between module entries because they were off-grid.
57868	Added the ability to move a selected group of module entries in a multi-board schematic document.

Harness Design

52892	It was not possible to use the Parameter Manager from the Wiring Diagram.
53154	When highlighting (tracing) a wire/cable path on the Layout Drawing, the feature is now applied when clicking in the row for the wire (not just clicking its string).
53416	Object designators can now be included as active links in Text Frames and Notes, facilitating quick cross-probing capabilities within the Wiring Diagram and Layout Drawing.
55355	There was an empty row/entry in the Components listing for a selected Connection Table in a Harness Draftsman document.
56254	Added the Designator property to the Shield object in the Wiring Diagram.
56255	When using a 'Shield with Connection' object, its designator will now be added to the Wiring List (in the HarDwf document) when a wire is connected to its connector.
57880	Coverings used in the Layout Drawing are now treated as components in the BOM, with support for part choices and grouping.
57881	A full Wiring Diagram can now be defined over multiple *.WirDoc documents (in a 'flat' design fashion), with the ability to split a wire using the new Wire Break object. (BC:20335)
58034	When deleting a specific segment of a wire (Wiring Diagram) or bundle (Layout Drawing), the entire wire/bundle would be removed.
58061	When replacing a placed harness wiring component with another (in the Wiring Diagram), parameters present in the former but not in the latter were not being removed.
58191	It is now possible to show a connection table for individual splices, in a Harness Draftsman document.
58330	Added the Designator property to the Twist object in the Wiring Diagram.
58331	In a placed Connection Table in a Draftsman document, Pin IDs were incorrectly being sorted in the order "1, 10, 2, 20, 21,..." instead of sequentially "1, 2, 3, 4, 5,...".
58333	When placing a splice/connection point on a wire (Wiring Diagram)/bundle (Layout Drawing), the new wire/bundle will have a reset designator (<Prefix>?). Bundle length will be preserved.
58450	For a connection point on a Layout Drawing, it is now possible to move its designator independently of the point itself.
58451	'Crimps' have been renamed 'Cavities' in the UI of the Wiring Diagram and Layout Drawing.
58452	For a harness component in a Layout Drawing with multiple physical views defined, the component's properties will always be presented in the Properties panel irrespective of view selected.
58454	Added ability to 'split' a Wiring List in a Harness Draftsman document to be presented over a number of 'pages', along with control to limit the page height.
58599	In a specific design, a particular selected bundle was not showing the correct bundle objects (separate wires instead of a single cable).

Platform

56216	When using a license served by the PLS of an Enterprise Server, it was possible to lose that license when the PC was awakened from a period of hibernation.
58291	Improved text for the three variations of the 'License Renewal Failed' dialog, along with a link to the relevant Knowledge Base article with steps for resolution.
58559	In some cases, an Access Violation (at address 000000010DE27684 in module "WorkspaceManager.DLL") would be encountered.
58700	Altium Designer now installs, by default, the latest version of the 7-Zip Standalone Console (7za.exe).

Data Management

53752	When attempting to release a specific design with the Project Releaser, the error "Coordinates cannot be negative" would be encountered. (BC:21770)
57940	Added support for aggregated lifecycle states (wherever part choices/details are presented), whenever multiple data providers are available (Octopart, IHS Markit, SiliconExpert).
58356	When connecting to an SQL database from a CmpSync document, an error would be encountered if database headers included spaces or special characters.
58358	When using the 'Export Grid' feature in the Explorer panel, exporting to 'XLS' format would result in the error "The file format and extension don’t match..." being encountered. (BC:22106)
58402	For Git-based projects, the Commit command has been removed from the History & Version Control sub-menu. Visibility is controlled by the VCS.AllowGitCommit advanced option (OFF by default).
58412	When editing a Workspace Library component, if the models were inspected without change, they would still be released into their next revision and set back to the base lifecycle state.
58465	Added the 'General' tab to the Project Options dialog for a Workspace project, when working with the project and disconnected from its Workspace.
58631	Internal details now hidden from the messaging in the error dialog that appears when attempting to share a snapshot of a project that is restricted for sharing.
58657	Upon validating a component created through a part request workflow, a fatal error would be encountered relating to the Description/Comment (Name) parameter not having a value defined.
58760	When turning off synchronization for a Git-based Workspace project, the .gitignore file was not being deleted from the local project copy's folder.
58796	The control to obtain paid SE parameters for a part ('Get SiliconExpert Advanced Part Data') now remains visible if free parameters (with lifecycles) have been received.
58822	When saving a Git-controlled project to the connected Workspace, Merged files are now always enabled for committal (and can't be disabled).
58839	When browsing the history of a symbol/footprint in the Explorer panel, the preview was not being shown if the Part Choices tab of a component's history had been previously selected.

Import/Export

54302	When exporting a PCB into Ansys EDB format, some pads would be rotated when compared to the original board layout. (BC:20506)
57576	Updated CAD Exchanger library to 3.23.0. This updates supported versions of import/export formats and resolves some export issues (e.g., Parasolid Models compatibility with SOLIDWORKS).
58149	When importing a specific xDX Designer design, ports were missing on a generated schematic document.
58150	When importing a specific xDX Designer design, ports were being placed at incorrect locations on a generated schematic document.
58152	When importing a specific xDX Designer design, an unexpected port placed between two wires on a generated schematic document caused a short circuit.
58154	When importing a specific xDX Designer design, the values for Description and Comment parameters for specific components were empty.
58159	When importing an xDX Designer design, there was no support for custom colors, resulting in generated schematics not containing the same coloring for elements as per the original file.
58438	When importing a specific xDX Designer design, the snap grid was disabled for the generated schematic document(s).
58492	When importing a specific Allegro design, buried vias were being imported incorrectly.
58608	When importing an Xpedition design/library, the Placement Outline layer is now mapped to the Courtyard layer and the Insertion Outline layer is now mapped to the Component Outline layer.
58626	When importing a specific Xpedition library, the centers of the text boxes for Ref Des and Part No fields (for any footprint) were not being located on the footprint origin.
58681	When importing a Zuken CR-5000 design, the Drawing layer was being imported as primitives on signal, overlay and paste layers.
58682	When importing a Zuken CR-5000 PCB, the layer mapping was not getting reset to defaults, sometimes resulting in incorrect layer conversion.
58757	When exporting a PCB into Ansys EDB format, resistor values specified in MOhm were being incorrectly exported in mOhm.
58792	When importing an xDX Designer design, the "Force passive PinType for IN,OUT,BI pins" option (on the Reporting Options page of the Import Wizard) is now disabled by default.
58803	When importing a specific Xpedition library, Top Solder Paste and Mask were being incorrectly imported for a particular footprint.

Circuit Simulation

55555	In some cases, an Access Violation (at address 00007FFAEEEE1A2F in module "xspice.dll") would be encountered.
58026	Added Stress Analysis option as part of Transient Analysis, calculating operating conditions (max V, I, P) for each component, checked against defined limits in a component's Stress model.
58340	For a specific design, running an OP analysis with the Transfer Function enabled resulted in no Transfer Function tab created in the SDF document.
58633	For a specific design, running a Noise analysis resulted in no Noise Spectral Density and Integrated Noise charts being created in the SDF document.
58834	After placing a differential voltage probe between Vcc and out on the first sheet of the Quick Start project, running an OP analysis resulted in an "Index out of range" exception.

Version 24.0.1

Build: 36 Date: 13 December 2023

Schematic

57925

In some cases when working with a schematic, the error "Object reference not set to an instance of an object" would be encountered.

PCB

54402	Introduced support for the "Any Angle" corner style when using the Interactive Differential Pair Router. (I:8312)
54880	Optimized and increased performance when selecting a via to access its properties in the Properties panel, especially in large designs.
56856	It was not possible to apply a custom material to a Surface Finish layer in the Layer Stack Manager. (BC:21579)
57845	When generating ODB++ data directly from a PCB, folders for custom pad shapes would be created with naming that did not conform to Legal Entity Names in the ODB++ specifications. (BC:21104)
58072	In some cases, it was possible for a PCB to enter a state where its board region had no stackup assigned.
58088	When manually entering an invalid value for Paste Expansion (for a Paste layer), the error "The input value is invalid" would be encountered.
58102	When generating a printed composite drawing from a PCB (directly or through an Output Job), displayed pad numbers and pad nets were being mirrored about the X-axis. (BC:21511)
58109	A Diff Pair tuning pattern would lose its target rule whenever the PCB document was closed and reopened.
58335	Enhanced Layer Stack Report Setup dialog now includes all columns that are present in the Layer Stack, giving more control over the data to be displayed in a generated Layer Stack Report.
58370	It was not possible to set the impedance reference layer to 'None' when defining an Impedance Profile through the Layer Stack Manager. (BC:21626)

PCB CoDesign

58023	Enhanced performance when initially expanding a category involving many differences in the PCB CoDesign panel.
58053	You can now select coloring (View Configuration panel) for objects that have been added, modified, removed and not changed (unchanged objects of a pin-to-pin connection).
58181	Conflicts of copper objects are now grouped in pin-to-pin connection groups where applicable, to ease exploring and resolving the changes.

Constraint Manager

57977	Added ability to edit a custom topology of Nets when accessing the Constraint Manager from the PCB editor.
57979	Added the ability to edit the custom topology for a chosen constraint set.
57981	The Constraint Manager has been included as part of the 'Cross Select' feature. When enabled, you can cross-select nets from the Constraint Manager to the schematic/PCB and vice versa.
58020	All nodes, except for those that are predefined, are now collapsed by default on the Physical and Electrical views. Menu commands support the quick expand/collapse of all nodes.
58240	Added support for Differential Pair Classes to the Clearance Matrix (in the Clearances view).
58299	Added the ability to remove a selected xSignal from the xSignals tab (in the Electrical view).
58625	With the Constraint Manager enabled, creating a Clearance rule through the Polygon Pour Manager would result in the inability to save the PCB document and an Access Violation. (BC:22326)
58634	With the Constraint Manager enabled, it was not possible to disable Clearances rules, or change their scoping, in the 'PCB Rules and Constraints Editor' dialog. (BC:22295)

Draftsman

57369	There was a noticeable lag between selecting objects in the document and its properties being presented in the open Properties panel.
57579	Improved the progress message when importing component changes for a Board Assembly View, reducing the import time considerably.

3D-MID Design

58426

Support for direct layout on a 3D substrate in support of 3D-MID designs, with manufacturing export data in the format required by the Laser Direct Structuring (LDS) manufacturing process.

Harness Design

56164	The Wiring List and Connection Table in a Harness Draftsman document would not display the wire color in the Color column, if the color name had been specified using a hexadecimal value.
57193	In some cases, enabling/disabling the visibility of wire parameters in the Wiring Diagram would not work correctly for older Harness design projects.
57407	Layout Labels used in the Layout Drawing are now treated as components in the BOM, with support for part choices and grouping.
57543	Layout Labels in a Layout Drawing can now be rotated using either the Spacebar or the Rotation field in the Properties panel.
57807	Placing a Harness Wiring Component into the Wiring Diagram from the Explorer panel using drag-and-drop was not working correctly, while the right-click Place command was non-functional.
57859	Added extra data columns to the Connection Table (Cable, Crimp, ToPin, ToPart) and Wiring List (Cable, FromCrimp, ToCrimp) objects in the Harness Draftsman document. (I:22177)
57866	When updating a harness component on the Layout Drawing to the latest revision (in the connected Workspace Library), its orientation would be changed.
57867	When updating a harness component on the Layout Drawing to the latest revision (in the connected Workspace Library), the drawing order (Z-axis) of covering objects would be changed.
57883	Copy, Cut and Paste features were not working in the Harness Wiring Model editor.
57968	In the Layout Drawing, it is now possible to split cable wires at the end of a bundle.

Platform

56676	Added support for use of long paths, where <filepath>+<filename> is greater than 256 characters (requires long path support to be first enabled for Windows). (BC:20970, BC:21080, I:10475)
57740	In some cases when preparing a project for release using the Project Releaser, GDI handle usage would become very high and sometimes lead to Altium Designer crashing.
57774	In some cases, the error "System.InvalidCastException: Unable to cast COM object of type "System.__ComObject"..." would be encountered.

Data Management

57726	It was not possible to commit modifications to a free SchLib/PCBLib associated with an SVN Database Library, using the Storage Manager panel. (BC:18693)
57834	Accessing the Library Health view within the Explorer panel would result in the session for the Tasklist panel being terminated.
57856	Improved error message text when attempting to place a Workspace Library component that has no referenced schematic symbol.
57892	For a specific design repository, attempting to migrate constituent projects 'with history' would result in failure.
57954	Adding the .PrjPcb file to its own project and then right-clicking on the main project entry in the Projects panel, would cause Altium Designer to crash and close. (BC:21967)
57991	In the Open Project dialog, changes made to columns (ordering, visibility) were not being stored, instead reverting back to defaults after a restart of the software. (BC:22286)
57995	When Downloading Sources for a previous commit of a Workspace project (from the project's history view) that historical commit would not be opened in the Projects panel. (BC:22024)
58176	For a specific PCB design project, Altium Designer would 'freeze' when opening the project's ActiveBOM document.
58180	When saving defined variants in the new Variant Manager, the data in the generated .txt file was not consistent with the view of the data in the Variant Manager.
58239	Clicking Save to Server on a specific file (in the Projects panel) will now select only that file in the Save to Server dialog.
58251	When saving a Git-controlled project to the connected Workspace, conflicted items are now always enabled for committal (and can't be disabled).
58285	After transferring ownership of a component, its history would incorrectly show the new owner as the Creator of that component.
58315	When re-releasing a symbol to a connected Workspace, the name of the Workspace was not presented correctly in the listing of components related to that symbol.
58376	In some cases when working with the Components panel, the error "System.InvalidCastException: Specified cast is not valid" would be encountered.

Import/Export

57381	xDX Designer Importer has been enhanced to better handle import of multi-part symbols, provide symbol-only import functionality and generate part-symbol and pin mapping data in CSV format.
57763	When importing an Xpedition design, Placement Outlines can now be imported as primitives on the Placement Outline layer and also as extruded bodies on Top/Bottom 3D Body assembly layers.
57932	When importing an Xpedition design, it is now possible to choose the layer from which to create extruded body shapes, storing them on the Top/Bottom 3D Body assembly layers.
58031	For a specific imported OrCAD design, the pin names for components on the generated schematic sheets were rotated.
58119	xDX Designer Importer has been further enhanced to support datasheet information, storing as a reference (ComponentLinknDescription/ComponentLinknURL parameters) in the resulting CSV file.

Circuit Simulation

57909	In some cases when working with the Simulation Viewer, the error "Object reference not set to an instance of an object" would be encountered.
58035	Output currents for P-Channel transistors (BJT, JFET, MOSFET, MESFET) are now treated as inflow currents, making them consistent with N-Channel transistors.

Ansys CoDesigner

52948

Added support for collaborative design (CoDesign) between the ECAD (Altium Designer) and Simulation (Ansys Electronics Desktop (AEDT)) domains.

Power Analyzer by Keysight

58001

Added support for assigning currents for multiple nets on the same component, for different series elements. (BC:22388)

Other

55571

In some cases when moving a 'Windows User Interface' panel, an Access Violation (at address 0000001400011565 in module "X2.EXE") would be encountered. (BC:21826)

Version 23.11.1

Build: 41 Date: 16 November 2023

Schematic

48706	In some cases when working in a schematic, the error "System.AggregateException: One or more errors occurred. ---> System.NullReferenceException..." would be encountered.
49434	In some cases when generating a PDF of schematics, placed bitmap images would appear chopped and of poor quality. (BC:14016, BC:15485)
55967	In some cases when working in a schematic, an Access Violation (at address 000000014A17FC0D in module "AdvSch.dll") would be encountered.
57249	When using the SCH List panel's Smart Edit feature to batch replace port Name or power port Text, the changes were not being effected after clicking OK. (BC:22086)
57559	The Advanced Settings option "Schematic.ExportPDF.UseBitmapTransparency" is now ON by default.
57975	Back annotation of schematics would result in an error if component designators had been renumbered/re-annotated on the PCB side.
58049	In some cases when performing a validation, the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered.

PCB

54204	Added support for Automatic Length Tuning, available from the main Route menu.
54762	Added a PCB Layout Replication tool, providing the ability to quickly replicate the layout for repetitive blocks of circuitry in a flat PCB design.
55010	For a specific design, there was a noticeable performance drop where Altium Designer would freeze after repouring all polygon pours and then closing the PCB. (BC:19948)
55543	When running a DRC for a specific design, the error "An invalid character was found in text content" would be encountered.
56601	Added support for pin-to-pin connections as part of the PCB CoDesign feature, making it easier to understand changes and to avoid false conflicts.
57376	For a specific design, false clearance violations were being flagged between a keepout arc and other objects if the former was rotated at a specific angle.
57505	Copper connections were not properly produced under Pads when conductors set to "Auto" in the Polygon Connect Style Rule, resulting in violations of the Un-Routed Net Rule.
57536	When exploding a custom pad whose shape includes a solid region, that region would be created on the Top Layer and not the original layer on which the pad resided.
57557	Mirrored Gerbers were not being shown in the Gerber configuration interface unless the Advanced Setting option (UI.Unification.GerberDialog.ShowMirrorColumn) was enabled. (BC:21812)
57627	For a specific design, tuning the length of one diff pair that violated a Matched Lengths rule led to violations of other diff pairs covered by the rule. (BC:21870)
57717	The 'Compare and Merge' panel has been renamed to the 'PCB CoDesign' panel, in accordance with the official naming of this feature area.
57773	Added a display settings control to the PCB CoDesign panel, giving access to configure whether changes are highlighted on the PCB and whether a selected object is zoomed (and by how much).
57808	While interactively routing, it was not possible to place a stack of microvias under a pad.
57815	When using the PCB CoDesign feature, you now have the ability to quickly toggle between the current state and the state before any changes, using the Shift+B keyboard shortcut.
57911	Added a keyboard shortcut (Shift+A) to quickly toggle the state of the 'Show on PCB' option in the display settings of the PCB CoDesign panel.
57919	When via stitching on a multi-layer board, stitching would not be applied correctly if a smaller region of the same stitching net existed on an inner layer. (BC:21987)

Constraint Manager

57966

A new Constraint Manager is available providing a unified, table-based/spreadsheet-like editing interface for defining design constraints from within the Schematic and PCB.

Draftsman

57371

The 'Auto' width option for columns in a placed BOM Table was not functioning correctly.

Multi-board

56741	For a selected text object on a multi-board schematic, its text property will now become read-only when the 'Use document font' option is enabled.
57223	For a selected module entry on a multi-board schematic, making a change to the pin of a mated part was not being refreshed immediately in the Properties panel.

Harness Design

55772	Display of harness connectors in the Draftsman document did not follow the same drawing order as in the Layout Drawing (Wireframe models were being drawn underneath Solid 3D View models).
56249	When adding objects to a connection point in the Layout Drawing, the option to "Show only unassigned objects" is now enabled by default in the Add Assigned Objects dialog.
56388	Crimp assignments can now only be modified in the Wiring Diagram, with the corresponding crimp information grayed-out/non-editable in the Layout Drawing.
57191	When making a parameter for a selected wire in the Wiring Diagram visible, it would appear too far away from the wire.
57221	When inserting a Wiring Diagram/Layout Drawing View into a harness draftsman document, template document margins, zones and title block were also being presented and could not be hidden.
57273	After updating the footprint model (from library) for a harness connector in the Wiring Diagram, that new footprint was not coming across to the Layout Drawing after importing.
57630	When batch updating the colors of multiple selected wires in the Wiring Diagram, the displayed wire coloring changed but the color names did not.

Platform

57425	The License Management page will now detect if a license cannot be renewed (nor a seat added to it) and no longer present the controls with which to do so.
57647	Added ability to the License Management page for an Admin to 'Trade Up' an expired on-demand perpetual license of Altium Designer, quickly upgrading to a newer version of the software.
58123	When launching Altium Designer, a dialog warning of no license usage (when signing in automatically to an on-site Workspace) would appear, blocking startup until acted upon. (I:21947)

Data Management

56374	For the error that can be encountered when attempting to download a component with no models from the MPS panel, the error message text has been made more meaningful.
56708	It was not possible to add a project to version control when the project path exceeded 250 characters.
57177	In some cases, changing the password for accessing an external SVN design repository would lead to a hard crash of Altium Designer at startup. (BC:21660)
57321	When generating schematic prints as part of the release process using the Project Releaser, a chosen variant in the OutJob would be ignored, instead using [No Variations]. (BC:19538)
57413	In the Explorer panel, changes made to columns (ordering, visibility) were not being stored, instead reverting back to defaults after a restart of the software. (BC:21750)
57421	An excess HTTP request was being invoked when creating a new component from the File menu.
57533	It is no longer possible to create project parameters with the same name (parameter names are now case-insensitive).
57551	Added support for SiliconExpert data to the Use Component Data dialog, when saving a chosen part in the Manufacturer Part Search panel to your connected Workspace.
57587	When connected to an Altium On-Prem Enterprise Server, placing a comment would result in an error because Altium Designer was incorrectly trying to contact Altium Cloud Servers.
57614	When copying component historical data from the Timeline of the Detailed Item View, column names were not being included in the copy.
57994	For a component stored in an Enterprise Server Workspace, attempting to update to its latest revision through the Item Manager would result in the error "Invalid or deleted items".
58101	In some cases when attempting to update items to their latest revision through the Item Manager, the error "EListError: Item not found" would be encountered.

Import/Export

54748	When importing a specific Xpedition design using the Import Wizard, some signal layers were being incorrectly detected as Prepreg layers.
57508	When importing Xpedition design/library using the Import Wizard, padstacks would be automatically named rather than using their original naming.
57509	When importing an Xpedition design using the Import Wizard, an extended list of layer types is now available with which to more accurately map layers and create appropriate layer pairs.
57511	When importing a specific Xpedition design using the Import Wizard, a regular pad was being imported as independent regions on the solder/mask layers, instead of being part of the padstack.
57593	When importing an Xpedition library using the Import Wizard, the overall height of the 3D body for a specific footprint was being imported incorrectly.
57594	When importing an Xpedition library using the Import Wizard, a custom pad shape defined for a specific footprint was being imported as a circle on the Bottom layer.
57595	When importing an Xpedition library using the Import Wizard, custom pad shapes were being imported as independent primitives.
57599	When importing an Xpedition design using the Import Wizard, the imported obstruct area for a specific footprint was being presented as a keepout for tracks only (instead of tracks and vias).
57610	When importing an Xpedition design using the Import Wizard, the assembly 'Ref Designator' and 'Part Number' were being stored as part of the Assembly Outline instead of separately.
57612	When importing an Xpedition library using the Import Wizard, the solder mask for a specific footprint was being imported without solder cutout.
57615	When importing an Xpedition library using the Import Wizard, the 3D body for a specific footprint was being imported on the Top Assembly layer instead of the Bottom Assembly layer.
57820	When importing an Xpedition library using the Import Wizard, a specific footprint was being imported without its top paste.

Simulation

57589	For a specific design, running a transient analysis would take considerably longer if the "Show Designation Symbols" option was enabled as part of the SDF document's options.
57728	It was not possible to place a simulation source from the Mixed Sim toolbar. (BC:21439)
57729	Components in imported designs or those placed from installed Database libraries, are now included in the generated simulation netlist if they have an assigned simulation model.
57730	Mixed simulation can now be configured to use a dedicated thread to improve interface response time during simulation, available when the Simulation.Threads option is enabled.
58207	In some cases when running an AC Sweep analysis, the EOleException "Index was out of range. Must be non-negative and less than the size of the collection..." would be encountered.

Version 23.10.1

Build: 27 Date: 17 October 2023

Schematic

46303	Added advanced option Schematic.ExportPDF.UseBitmapTransparency, providing clear display of text and other drawing objects that overlap a graphic image, when generating a PDF. (BC:16843)
56318	In some cases, the EOleException "HRESULT: [0x887A0022], Module: [SharpDX.DXGI], ApiCode: [DXGI_ERROR_NOT_CURRENTLY_AVAILABLE..." would be encountered.
56624	When validating a specific design, a violation was being flagged for a signal harness connector, even though it was under a compile mask.
57338	When generating a PDF of schematics containing generic components using Smart PDF, those components would be displayed in color, even when Greyscale mode was chosen.

PCB

53092	For a specific design with blind vias between the Top Layer and an internal plane layer, export to Ansys EDB format would result in the Stop layer being incorrect. (BC:19857)
54571	Additional functionality has been added to the Gloss And Retrace panel (for the Rounded Hugging Style) for retracing any angle single-ended traces.
57012	When creating an LGA package footprint from a specific LGA package file using the IPC-compliant Footprints Batch Generator, the generated step model was not matching the footprint.
57112	When flipping a component with thru-hole pads, defined custom paste did not flip side. (BC:21635)
57113	In the Properties panel, the Layer_Count, Board_Height and Board_Width special strings can now be found in the 'Board' category. The 'PCB' category is excluded.
57342	Support for collaborative editing of a PCB has been completely redesigned, offering a Git-like approach with version control provided courtesy of your connected Altium Workspace.
57424	In some cases, a manually-defined solder mask expansion would change to a large negative value after saving and reopening a PCB.

Draftsman

56860

The special strings =Hole_Size_Min and =Total_Thickness now observe changes to units (mm/mil).

Harness Design

53128	When moving, as a group, a harness component and associated connection point on a Layout Drawing, their relative coordinates were being changed.
53845	It is now possible to use the annotation feature to apply desired designators to supported objects on both the Wiring Diagram and Layout Drawing.
56389	Added support for callouts to be associated with crimps in a Harness Draftsman document.
56463	The 3D View of the model for a connector on the Layout Drawing was not being regenerated after updating the connector to the latest revision, and where a different footprint model was used.
56826	For a specific harness design that included a particular connector, import of the Wiring Diagram into the Layout Drawing document would result in Altium Designer 'hanging'.
56831	When accessing the properties for a connector in the Layout Drawing, using the associated modal dialog, physical views were not being presented.
57161	Added the Properties command to the right-click context menu for objects in the Wiring Diagram and Layout Drawing, allowing for quick access to properties in the Properties panel.
57180	Added support to Wiring Diagram and Layout Drawing for adding reference documents to a harness connector component and accessing via the component's right-click References menu.
57188	When placing a wire on a Wiring Diagram using Shift+W or P,W shortcuts, a 'ghosting' of that wire's comment parameter is displayed during the placement process.

Platform

56159	Selected text in the Search field of the Components and Manufacturer Part Search panels was not displaying clearly. (BC:21333)
57229	For the same user account signed in to two instances of Altium Designer, it was not possible to release a license being used by one instance from the other.
57486	In some cases, the error "System.Reflection.TargetInvocationException: Özel durum bir çaðýrma hedefi tarafýndan oluþturuldu..." would be encountered.

Data Management

42610	It was not possible to change from the automated naming used for Gerber X2 files generated through an Output Job. (I:5418)
51423	For specific components found and placed using the MPS panel, subsequent refresh of the ActiveBOM document would lead to the error "Server call failed: Invalid or deleted folders...".
54940	In some cases when accessing the Share dialog in Altium Designer, the error "Access denied! User login required for this service" would be encountered.
56002	It was not possible to release a cloned component if the lifecycle used for the original component was no longer employed for the Component content type.
56020	When working with comments, images taken to the clipboard from MS Paint did not paste properly into the contextual commenting window.
56233	After deleting a general task (from within Altium Designer or the connected Workspace's browser interface), it would still remain displayed in the Comments and Tasks panel.
56313	In some cases when trying to download a component from the Manufacturer Part Search panel, the error "Cannot get component revision" would be encountered.
56788	In some cases when using the commenting system, the error "Newtonsoft.Json.JsonReaderException: Unexpected character encountered while parsing value..." would be encountered.
56794	For a selected part in the Manufacturer Part Search panel, the Manufacturer Part Number coloring had reverted to blue instead of being white.
56847	While using comments, a "403 Forbidden" error would lead to the Commenting feature freezing.
56854	When building a hierarchy of component types, component sub-types will now inherit the component template assigned to the root/parent component type.
56880	When changing the template for a component and that template has an assigned type, the "Change component type" dialog would appear twice and also not show the current component name.
57026	The performance of the Item Manager's "Update to latest revision" operation has been greatly improved by grouping components and state requests.
57091	The text in dialogs associated with migration from SVN to Git repositories was incorrect when the target was an Altium On-Prem Enterprise Server. 'Altium 365' is now 'Server.'
57102	It was not possible to refresh the content of the Manufacturer Part Search panel using the F5 keyboard shortcut.
57110	When migrating a project from internal SVN to internal Git (Versioned Storage) repository for a connected Enterprise Server, the original SVN repository was being removed.
57142	The year is now included as part of the date information displayed for a comment.
57168	After editing a component template, using the feature to update related components (using that template) would only update the first 100 components.
57218	Modifications made to a PCB design's project file (*.PrjPcb) were not being detected. (BC:21667, BC:21813, BC:21824)
57226	Project migration from internal SVN repository to internal Git repository would not work if the source repository address contained a space character.
57242	In some cases when trying to refresh a harness project's state after a commit by another user, the error "External component has thrown an exception" would be encountered.
57271	The Components panel now includes 'where used' information in relation to Reuse Blocks stored as part of a connected Workspace's library.
57283	It is now possible to add an alternate BOM item into an ActiveBOM document (*.BomDoc) using the Software Development Kit (SDK).
57299	The Where Used region of the Components panel has been redesigned. Tabs will also now only be displayed if an entity exists in the Workspace that uses the selected component.
57318	In the Explorer panel, changes made to columns (ordering, visibility) were not being stored, instead reverting back to defaults after a restart of the software. (BC:21750)
57329	When editing multiple Workspace components, the CmpLib document name reflected an incorrect component count, compared with the number of components actually being edited.
57400	When using the Item Manager to update selected components to the latest revision, the subsequent ECO included entries attempting to delete system parameters.
57415	In a specific case, an error that a "file could not be accessed as it was being used by another process" would be encountered on startup.
57434	It is now possible to copy (using the Ctrl+C keyboard shortcut) component historical data from the Timeline of the Detailed Item View.

Import/Export

56771	When importing a specific Allegro design using the Import Wizard, none of the defined design rules were being imported.
56973	When importing a specific Allegro design file copper planes were being duplicated, with polygon pours and regions being created on the same layer simultaneously.
56974	When importing an Allegro constraints file (*.dcfx) using the Import Wizard, the generated PCB document would only support 'mil' units and not 'inch' or 'mm'.

Simulation

54581	Added support for TABLE and PWL functions to the Simulation Viewer.
57059	Deleting a source wave from the SimData panel would cause an exception.
57155	Some elements of Netlist Template syntax were not supported by the Netlist Generator.

Power Analyzer

57181

When configuring a component as a load, the Load Properties dialog would scale incorrectly if there was an associated datasheet with a very long name, making configuration impossible.

Version 23.9.2

Build: 47 Date: 14 September 2023

Schematic

52260	In some cases, extra junctions would appear when moving some objects on a schematic sheet.
56188	In some cases when working with a schematic document, the error "EIntfCastError: Interface not supported" would be encountered.
56320	In some cases when working with a schematic document, an Access Violation (at address 000000014B336E58 in module "AdvSch.dll") would be encountered.

PCB

53317	In generated ODB++ and Gerber X2 output for a specific design, the drill layers with microvias were incorrect for a panelized board with mixed layers.
55466	In some cases, Altium Designer would randomly and periodically freeze when performing various, different actions within the PCB Editor. (BC:20831)
55895	There was a considerable performance slowdown when adding larger numbers of stitching vias (>100,000) to a board.
56339	Changing X/Y values for a pad on an overlay layer (or the Drill Guide/Drill Drawing layer) would change the pad in the design space, but show as 0, 0 in the Properties panel. (BC:21443).
56357	A false clearance violation would occur between regular and custom shape pads when the center axis of the regular pad coincided with the edge coordinate of the custom pad shape. (BC:21381)
56744	For a specific panelized PCB, a placed drill table was not showing blind and buried vias.
56752	Vias with mixed-layer structure (blind, buried) were incorrectly rendered for a panelized PCB, but correct for the source PCB.
56772	For a design including backdrills starting from the middle of the board (using a multi-lamination process), incorrect pad sizes were being generated in Gerber and ODB++ data.
56786	When running a DRC for a Matched Lengths or Length rule from the PCB Rules And Violations panel, violations were not being presented if xSignals were used in a rule. (BC:20474)
56842	It was not possible to save a custom-defined material to the Altium Material Library as while a new row could be added and defined, the Save and OK buttons were disabled. (BC:21547)
56930	With the PCB.EngineX.ClearanceRule option enabled (in Advanced Settings), duplicating a design rule would lead to a sizable number of false violations being detected by the DRC.
57096	With PCB.Pad.CustomMasks enabled, Custom/Chamfered Rectangular pads placed on Paste or Solder Mask layers were not displayed. Sometimes, such pads would transform into tiny round pads.
57137	When using the Section View feature, the view planes were not being displayed.
57227	In some cases when using the Update from PCB Libraries feature, choosing a footprint to view comparison data would result in an Access Violation (in module "X2.EXE"). (BC:21739)

Multi-board

55587

Lines were not being displayed for the title block area after applying a template to a multi-board schematic document. (BC:21246)

Draftsman

51779	For a specific design involving a complex board shape, it was not possible to place a radial dimension on the Board Assembly View. (BC:8758)
57121	In some cases when trying to edit the section line for a Board Section View, the error "Object reference not set to an instance of an object" would be encountered. (BC:21652)

Harness Design

53781	Cross-probing from a message in the Messages panel to the corresponding object within the harness design was not functioning.
55469	When defining a physical view on the Layout Drawing, zoom functionality has been enhanced and Width and Height are no longer independently definable.
55819	Shortcuts added for placing a wire (Shift+W) in the Wiring Diagram and a bundle (Shift+B) in the Layout Drawing.
56434	After updating a connector in the Wiring Diagram from its source library and importing changes to the Layout Drawing, objects in the associated bundle were lost.
56464	Dimension locations were not being updated on the .HarDwf document after moving connection points on the Layout Drawing and importing the changes.
56625	The Validate button at the top of the Projects panel can now be used to run an ERC for the active harness project.
56745	The Parameters section was missing in the Properties panel for a selected connection point object in the Layout Drawing.

Platform

56425	Added license type 'labels' to be able to quickly (and visually) distinguish between licenses in the listing on the License Management page.
56636	The search field (and related sorting control) now appear only when there are more than 7 licenses in the listing.
56802	The main Project menu when no document is open now presents the same commands as those when the Home page is the active document, along with the Project Activities sub-menu.
56803	In some cases, the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered.
57285	URLs to the Altium Store were being generated incorrectly when following links to renew a license or add seats, from within the License Management page.

Data Management

56118	When generating a PDF of schematic prints from an OutJob file, any objects placed over a graphic image in a source schematic would appear distorted in the PDF.
56142	The error message displayed when the software requires a Workspace connection to check the Part Choices List control mode was not very clear.
56411	It is now possible to migrate a design project from using built-in SVN to built-in Git for a connected Altium On-Prem Enterprise Server.
56555	Updated the menu for a part choice/alternative to add a command to open the page for it on the Octopart site.
56596	The Tasklist panel is no longer visible when connected to a Workspace with Standard or Pro level of access.
56633	It was not possible for a non-admin user to edit part choices for a component, even when they were assigned operational permission to do so.
56681	It was not possible to release a component carted (along with template) from another Workspace, when that component template pointed to an unavailable lifecycle definition.
56713	When placing a component from the Explorer panel (using context menu Place), the symbol description will be used instead of the component description if the latter contains the " character.
56719	In some cases when accessing the history for a component through the Explorer panel, an Access Violation (in module EDesignData.DLL) would be encountered.
56760	When connected to a Workspace, use of the F5 keyboard shortcut did not refresh the content of the Components panel. (BC:21521)
56830	Configured column widths in the Library Importer (in Advanced mode) were resetting to defaults if changing Component Type or the type of components being viewed was changed. (BC:21528)
56861	After editing (reworking) a component as part of a Part Request workflow, the workflow form is not updated with that later revision.
56866	When using the new Variant Manager, closing and reopening it would result in the variant columns being displayed in reverse order.
57077	In some cases when creating a new component in a Workspace, the Parameters region of the Properties panel, when defining a new symbol, was missing. (BC:21633)
57172	An unnamed comparison type was being displayed on the Comparator tab of the Project Options dialog. (BC:21668)

Import/Export

46680	When importing an Allegro .dra file using the Import Wizard, SMD pads would come in as Full Stack instead of Simple, and incorrect sizing was being displayed in the Properties panel.
54998	In some cases when importing a KiCad design, the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered. (BC:21379)
55763	When importing an OrCAD design using the Import Wizard, parameters in the title block of a generated schematic document were behaving as text strings rather than true document parameters.
55773	When importing an OrCAD design using the Import Wizard, there was no support for customized port connectors on a generated schematic document.
55806	In some cases, junctions were not being displayed immediately on schematic documents after importing an OrCAD design.
56469	When importing an OrCAD design using the Import Wizard, component comments were being incorrectly positioned on a generated schematic document.
56472	When importing an OrCAD design using the Import Wizard, some components were being filled with the wrong color on a generated schematic document.
56850	Import of an Allegro .brd file that has been created in v17.4 and then saved in 17.2 format (the same version as that of the Extracta installation) will now complete successfully.
57020	When attempting to import a specific Xpedition library using the Import Wizard, a crash would be encountered.

Simulation

56292	In a specific case, a SimView document was not being deleted after it was closed, causing a memory leak.
56556	For some components in the Simulation Generic Components library, their descriptions contained typographical errors.
56579	Altium Designer would freeze after changing the Time Delay value for a placed VSRC component (with 'Pulse' stimulus type) to 10ms.

Version 23.8.1

Build: 32 Date: 15 August 2023

Schematic

56129	Added the ability to change the Line Style used for the Rectangle object. Choose from Solid, Dashed, Dotted and Dash dotted styles.
56316	In some cases, the error "Unable to cast COM object of type "System.__ComObject"..." would be encountered.
56656	An exception would be encountered when attempting to display (in the Components panel) the symbol for a component in a SchLib and that symbol contained a text frame. (BC:21559)

PCB

52750	For a specific embedded board, custom pads were being incorrectly located when using the Print Preview feature and in subsequently generated PDF documentation.
53166	For a particular design and with a specific expansion value for a custom shaped pad's Top Paste Mask, an error would be encountered when generating IPC-2581 output.
54470	Added additional support for customization of padstacks. You can now define custom Paste/Solder Mask shapes. (I:2424, I:10245, I:14604)
55401	After closing a PCB document, not all memory was being released/freed as expected, indicative of a memory leak.
55520	Additional special strings (with auto-calculated values for key manufacturing parameters) now available in support of composing fabrication notes when preparing an RFQ. (I:6849, I:10853)
56095	For a specific design, glossing a selected odd-angle track in Rounded mode would result in an erroneous violation between the track and a neighboring pad.
56141	For a specific design, attempting to move a selection with the 'Component re-route' option enabled, would result in an Access Violation (in module 'ADVPCB.DLL') being encountered.
56212	For a particular design, interactively routing would lead to the PCB editor locking up and Altium Designer silently exiting. (BC:21185)
56223	Added the ability to control whether or not the rotation of the chosen source room is copied to a destination room when using the ‘Copy Room Formats’ feature. (I:8457)
56241	It was not possible to import a SOLIDWORKS 3D model (*.SldPrt) created using SOLIDWORKS 2023.
56595	In some cases with the PCB Rules And Violations panel undocked, left-clicking on a violation entry would lead to an Access Violation (in module "ADVPCB.DLL") being encountered. (BC:21481)

Multi-board

55431

When adding a connection to the selected group for a harness object on a multi-board schematic, the list of connections for that group is now automatically expanded.

Draftsman

55708	The Board Assembly View has been enhanced to now display counterholes.
56479	For a specific PCB project including an ActiveBOM with defined Alternates, import to a Draftsman document resulted in the error 'External component has thrown an exception'.
56660	When attempting to print the active Draftsman document directly from the File menu, an exception and/or 'cyclic crash' would be encountered.

Harness Design

55531

Electrical Rules Checking (ERC), with a variety of violation types, has been implemented for the Wiring Diagram and Layout Drawing.

Platform

53619	A new, redesigned License Management page is available, with streamlined and intuitive features and controls for both standard users and admins of an Altium account.
56504	For a PC without internet connectivity, Altium Designer would take a long time to open, being held at the 'Starting GUI manager' stage.
56690	In some cases. Altium Designer would crash when attempting to create a new component in a connected Altium 365 Workspace.

Data Management

55831	Added menu to a part choice/alternative to open it in the Manufacturer Part Search panel. Also added a dedicated hover control to copy manufacturer data.
56245	For an external SVN/Git repository, trying to deactivate it or set to defaults from the Data Management - Design Repositories preferences page, would result in a 'delete repository' error.
56293	It was not possible to release a component to the active Workspace if it had a defined parameter named 'Folder'.
56296	When adding a Draftsman documentation output to an OutJob file, a single menu entry is now available, with data source listed as applicable to the OutJob's parent project type.
56354	When defining a new component, the Component Editor (in its Single Component Editing mode) would not display more than 5 added footprint models.
56371	When sharing a Workspace project with your organization through Altium 365, an entry was not presented in the Share dialog within Altium Designer, giving no ability to change permissions.
56433	For a multi-board project, attempting to cross-probe from a module on the schematic to a project that is not available/downloaded, would result in a crash of Altium Designer.
56456	Filtering applied when using the Projects panel's search facility would be lost after opening a document from the filtered results. (BC:21163)
56474	The main Project menu's entry 'Assembly View' has been renamed 'Assembly Assistant'.
56554	In some cases, an error would be encountered when attempting to run a scheduled sync process from a PrtSync or CmpSync file.
56682	Configured column widths in the Components panel were no longer being saved between sessions. (BC:21489)
56689	For a specific local design (not connected to a Workspace), the error "Failed to pull data" would be encountered when refreshing the project's ActiveBOM document. (BC:21509)
56693	When editing pin mapping in the Pins panel, the error "Object reference not set to an instance of an object" would be encountered after entering an illegal character. (BC:21493)
56789	When editing pin mapping in the Pins panel and entering an illegal character, a different, inconsistent warning icon was being displayed.

Import/Export

55758	When importing an OrCAD design using the Import Wizard, the pin type was incorrect for various device pins on a generated schematic document.
55767	When importing an OrCAD design using the Import Wizard, power ports were being changed with respect to their style, on a generated schematic document.
55768	When importing an OrCAD design using the Import Wizard, there was no support for customized bi-directional off-sheet connectors on a generated schematic document.
55778	For a specific design, attempting to generate DXF/DWG output from its PCB would result in the error "Invalid Symbol Table name" being encountered.
56194	When importing an OrCAD design using the Import Wizard, incorrect graphics were being displayed for various components on a generated schematic document.
56225	When importing an OrCAD design using the Import Wizard, the pin symbol orientation was incorrect for various device pins on a generated schematic document.
56335	Added an option to "Force convert all I/O and Bi-directional pins to passive pins" when importing an OrCAD design using the Import Wizard.
56337	When importing an OrCAD design using the Import Wizard, unexpected text strings would sometimes appear on a generated schematic document.

Simulation

55849	Added support for Tpulse, Npulse and Tburst parameters to the EXP function in independent sources, allowing for the simulation of repeated bursts of transients.
56086	When simulating a specific design that included the BYPASS option, the error message "Unexpected end of expression" would appear in the Messages panel.

Version 23.7.1

Build: 13 Date: 19 July 2023

Schematic

49416	In some cases, rounding errors with mil-to-mm conversion would lead to unconnected pins. (BC:10291)
54935	In some cases when trying to open all schematic source documents at once, the error "Object reference not set to an instance of an object" would be encountered.
55317	Improved performance of the new Variant Manager, including automatic pagination when the number of variants exceeds 100.
55524	The =VariantName special string would not display the name of a variant correctly on a schematic sheet, if that name contained the ' character.
55775	When opening a specific schematic document that had been renamed (using Save As command), the document would be empty and a "Load file error" would be encountered.

PCB

45932	For a specific PCB, exporting to DXF/DWG format would not include component pads rotated by 180 degrees.
54107	When tuning a differential pair in a specific design, it was possible to create an extra tuning pattern after previously applied tuning had already achieved the target length.
54909	Added support for the import of custom pad stacks (and defined thermal leg ties) defined in an Allegro board design.
55397	When using the outer layers (Top/Bottom) for a single layer Flex PCB, the bottom solder mask was visible for a top SMD component pad.
55398	When generating NC Drill output, only a single drill was being generated for each of the IPC 4761 via types.
55551	For a specific panelized PCB, generation of Gerber X2 data through an OutJob resulted in the PTH_Drill.gbr file containing no data. (BC:20599)
55908	In some cases, closing a PCB document using the Ctrl+F4 shortcut would result in an Access Violation (at address 000000015C40C523 in module 'ADVPCB.DLL') being encountered.
55960	When generating Gerber files from a specific PCB document, the error "Exception has been thrown by the target of an invocation" would be encountered.
56012	The Board Report would show "100% Routing Completion", even when some connections remained unrouted, but were hidden.
56036	For a specific design, the number of holes in the Drill Table for a created Embedded Board Array was not equal to the sum total of holes in the Drill Tables for source PCBs.

Multi-board

55432

Added support for cross-probing from a harness object on a multi-board schematic to its linked harness project (where available).

Harness Design

53569	When dragging one connection point onto another (where valid) in the Layout Drawing, the two are now joined as a single object, with their assigned objects lists merged.
54491	When changing the Design Item ID for a harness connector in the Wiring Diagram, the connector was not getting updated in the Layout Drawing on import.
55214	When updating to the latest version of a harness connector on the Layout Drawing, any defined physical views were being reset.
55261	Added support for No Connect objects within a cable so that they are no longer required to be added to connection points on the Layout Drawing.
55328	When using the multi-line text feature for a Layout Label, the label's comment was getting brought into the text 'window'.
55385	On the Wiring Diagram, a shield object covering a cable and some wires would incorrectly lead to all wires becoming added to the cable object. (BC:21005)
55420	It is now possible to open and modify local wiring and layout template files (.WirDot, .LdrDot).

Platform

53596

In some cases, the error "System.Exception: <Fault xmlns="http://schemas.microsoft.com/ws/2005/05/envelope/none">..." would be encountered.

Data Management

49806	For a specific design/PC, the pop-up window associated with the clickable statuses feature was not displaying correctly.
52911	Added support for using commenting and tasks features in a Multi-board Schematic document (*.MbsDoc).
54562	Using a managed OutJob file configured for a rigid-flex design, with a fully rigid design, led to an Access Violation when attempting to generate ODB++ output.
54734	In some cases when working with Comments, the error "System.Exception: <?xml version="1.0" encoding="utf-8"?>" would be encountered.
54739	For a specific SVN project, the Open and Compare features of the Storage Manager panel would not work. (BC:17509)
54815	When committing a project to a GitHub Desktop repository, authentication would fail with error "Invalid username or password. Details: too many redirects or authentication replays".
55438	When importing components in an existing library using the Library Importer, any defined parameters with empty values were not being imported.
55478	For a component template created during library import, new/existing components based on that template would contain blank parameters not present in the template itself.
55512	The Explorer panel would not present component parameters if they had empty values.
55603	Attempting to navigate by clicking an invalid link in the Component Editor (SCE mode) would result in an exception being encountered.
55706	It is now possible to exclude a Part Choice defined for a component from the ActiveBOM document. (I:21004)
55710	The UI.SaveToServerPromotion option has been restored in the Advanced Settings dialog.
55804	In an ActiveBOM document, any value entered in the Note parameter for an alternate item was not being saved.
55847	It was not possible to stop a search of file-based libraries, resulting in Altium Designer 'freezing' until the search had finished.

Import/Export

54837	The error message displayed when importing an Allegro .brd file that is 'not recognized' or 'too old' has been enhanced, giving file version, Extracta version and possible causes.
55013	When importing a specific Xpedition design using the Import Wizard, polygon pours on the Top and Bottom layers were not being imported.
55051	For a specific DxDesigner design, attempting to import through the Import Wizard would lead to an error ("Could not create project") being encountered and the import stopping.
55318	When importing a specific Allegro design file, a logo defined on the silkscreen was not being imported.
55570	A more streamlined "version issue" notification is now provided when batch importing Allegro footprint files (*.dra), with the ability to import all other files that have no issue.
55619	When importing a specific OrCAD design using the Import Wizard, filled graphic objects were incorrectly being drawn in front of all other objects on the resulting schematic document.
55621	When importing a specific OrCAD design using the Import Wizard, unexpected cross-reference text was being added to the resulting schematic document.
55668	When importing a specific OrCAD design using the Import Wizard, an image placed in the title block was not being displayed correctly in the resulting schematic document.
55670	When importing a specific OrCAD design using the Import Wizard, some schematic sheets were missing, while others were not named correctly.
55672	When importing a specific OrCAD design using the Import Wizard, string information was not being presented correctly in the title block of the resulting schematic document.
55675	For a specific Allegro design, trying to import a .dra file led to an exception and crash being encountered.
55788	When importing an OrCAD design using the Import Wizard, original schematic sheet names in the format "xx.<DescriptiveName>" were being truncated to "xx.SchDoc".
55793	When importing a specific OrCAD design using the Import Wizard, text string/frame objects were presenting text with a larger sizing in the resulting schematic document.
55913	When importing an OrCAD design using the Import Wizard, text on a resulting schematic would have its style, size and position changed from that in the original design.

Simulation

53411	An updated version of the Simulation Data viewer is available, providing improved accuracy of waveforms and measurements (Advanced Settings option: Simulation.NewViewer, ON by default).
54516	In the Simulation Viewer, the Format X Axis command would not work when the Number of Plots Visible option (in the Document Options dialog) was set to 'All'.
54518	In the Simulation Viewer, the Fit Document command (on the View menu) would not work when the Number of Plots Visible option (in the Document Options dialog) was set to 'All'.
54741	The model used for the MOSFET P-ch VDMOS component (in the Simulation Generic Components library) was incorrectly that of an N-channel Power MOSFET.
54743	Y-Axis settings applied in the Simulation Viewer were not being retained after re-running the same simulation analysis. (BC:20917)
55260	When selecting a waveform in the Simulation Viewer, any waveform with a similar ending suffix would also be selected, despite not being linked.
55433	When viewing simulation results, it is now possible to select multiple waveforms in a plot using Shift+Click.
55434	The initial condition directive (.IC) defined within a subcircuit is now supported and can be processed/applied.
55442	Removed unused adc_* and dac_* parameters from all digital generic components (in the Simulation Generic Components library).
55495	Added support for the use of inductance currents in a functional source value expression.
56031	Resistance thermal noise was being incorrectly calculated when the instance temperature was set.

Other

55503

Other: A "Headers Failure" would be encountered when using 7-Zip to unzip the Zip archive for an offline installation of Altium Designer.

Version 23.6.0

Build: 18 Date: 15 June 2023

Schematic

51006	In some cases when working with schematic documents in a hierarchical PCB design project, the error "EInvalidAccessToObject: Object accessed after being destroyed" would be encountered.
53810	Generation of a Pick n Place file did not correctly observe the Fitted/Not Fitted state of a component after toggling the state on the compiled tab. (BC:17331)

PCB

51719	Support for adding user-defined parameters to footprints at the PCB Library level through the Properties panel has been added. (BC:13948)
52776	When glossing track entering an SMD pad in 'Rounded' mode, the track's trajectory is pulled to the corner of the pad, creating violations with nearby objects.
52778	When glossing odd-angle track in 'Rounded' mode, any arcs included are replaced with straight track, causing a violation with any neighboring keep-out track.
54567	Two additional options have been added to the Silkscreen Preparation tool, allowing you to "Clip to Exposed Copper" or "Clip to Solder Mask Openings". (BC:8044)
55043	In some cases on boards containing sections separated by net class, running a DRC would sometimes flag false clearance violations between split planes. (BC:20732)
55237	In some cases, an Access Violation (in module ADVPCB.DLL) would be encountered after attempting to delete a design rule created by the Rule Wizard.
55247	For a specific design, routing a particular section of the board would lead to the error "Infinite loop is detected" being encountered.

Multi-board

52563	Harness connector pin net names were not being updated in the multi-board schematic when the nets were renamed in the corresponding child PCB project.
55087	Some items in the BOM document for a multi-board project were incorrectly showing "Designator/Value is duplicate" warning messages.

Harness Design

51370	It is now possible to use harness connectors to make connections between multiple multi-board projects that are in a nested configuration.
53509	A Harness project can now be copied to the Templates folder for use as a local template. Harness documents can also be saved as templates (.WirDot, .LdrDot).
53984	After removing a splice from a Wiring Diagram the associated individual wires would remain connected, moving as one.
54831	Added support for defining an isometric view for Physical Models in the Layout Drawing.
54994	The Draftsman Wiring List object now displays "NC" for a wire that ends with a No Connect object on the Wiring Diagram.
55017	In the Wiring Diagram, moving a Splice object now also includes movement of its designator too.
55058	For the Draftsman Wiring List and Connection Table objects, the entry for a pin now only displays the pin number and not the parent part name.
55138	Added support for defining a harness covering's size in relation to the size of the bundle it is covering.
55141	It is now possible to define a patterned fill style for the harness covering object (on the Layout Drawing). Choose between black-, red- or yellow-colored weave).
55270	When importing a multi-board schematic harness containing a 'No net' signal into a Wiring Diagram, the error "Object reference not set to an instance of an object" would be encountered.
55338	After assigning a cable to a bundle on the Layout Drawing, the cable would be lost when that bundle was deleted.

Platform

55321	In some cases, SSO login through Altium Designer was not possible with a certain number of characters entered in the 'Your Business Email' field.
55410	When setting preferences to defaults, the "Double Click Runs Interactive Properties" option for Schematic and PCB editors was not being correctly set.

Data Management

54508	In some cases when using the Library Importer, the error "System.NullReferenceException: Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt" would be encountered.
54511	In some cases when signing in/out of a Workspace, the error "EOleException: Catastrophic failure" would be encountered.
55206	When adding parameters to a project, the Name and Value fields now allow a maximum of 255 characters.
55259	In some cases, the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered when working with a Workspace project.
55369	It was not possible to place a component from a Workspace Library into a PCB document if the referenced footprint model contained the '+' character in its name.
55382	Importing a specific DbLib using the Library Importer gave a Catastrophic Failure "Invalid characters in path" when the PcbLib file name contained forbidden characters.
55473	In some cases when using Dictionaries, parameter values would not 'stick' after scrolling and also mixed values from different dictionaries would be listed.
55583	In some cases, trying to release a project using the Project Releaser would lead to the error "Index was out of range. Must be non-negative and less than the size of the collection".

Import/Export

54836

In some cases, vias would be missing from the PCB after importing an Allegro design file.

Simulation

54713	In the Model File tab of the Sim Model dialog, the horizontal scrollbar was incorrectly presented within the tab's window.
55029	Printing from an SDF file to PDF was not dividing the plots between multiple pages correctly.
55157	Added support for the PSpice FSTIM digital model primitive and Bidirectional Transfer Gates I/O models.
55441	The grid color for plots when printing simulation results has been changed from black to light gray, supporting better contrast between grid and waveforms when printing in monochrome.

Power Analyzer

54283

The Extensions Manager dialog has been updated to group several extended components in parallel.

Version 23.5.1

Build: 21 Date: 18 May 2023

Schematic

52479	For multi-channel designs, the index of the channel was being added after the suffix in diff pair net labels, causing them to no longer be treated as a diff pair. (BC:19519)
52766	The Convert Cross Junctions tool would sometimes create manual junctions, which are no longer a supported object type.
53444	For a specific multi-channel design, the index of the channel was being added before the suffix in diff pair net labels, with ECO changing the diff pair net names.
54365	The PNG graphics for alternate parts were not being generated when creating a PDF of schematic prints from an Output Job.
54426	In the scripting system API's ISch_Document interface, using SchDoc.IsLibrary would lead to the error "Undeclared Identifier:IsLibrary" being encountered.
54656	In some cases when working with a schematic document, the error "EOleException: Ö¸¶¨µÄ²ÎÊýÒÑ³¬³öÓÐÐ§ÖµµÄ·¶Î§¡£ ²ÎÊýÃû: Unhandled value for TUnit: eDXP" would be encountered.
55224	In some cases, an Access Violation (at address 000000013F274036 in module "ExtensionManager.DLL") would be encountered.

PCB

51492	In some cases when working in the PCB document, the error "EInvalidAccessToObject: Object accessed after being destroyed" would be encountered.
52518	Added support for defining Custom Thermal Relief connection points for pads.
53554	Section View functionality is now available when viewing a PCB in 3D. (BC:1344)
53650	In some cases, the error "EInvalidAccessToObject: Object accessed after being destroyed" would be encountered.
54361	When running a batch DRC including Signal Integrity rules, an Access Violation (in module Altium.PCB.DataModel.X.dll) would be encountered.
54372	Pin contour information was not being included for custom pad shapes in generated ODB++ data. (BC:20552)
54577	Added the option "Preserve route path" to the Retrace Parameters region of the Gloss And Retrace panel which, when enabled, preserves the exact trace geometry during Retrace. (BC:20402)
54630	The "Apply to Polygon Pour" option was missing from the Creepage design rule when defining rules in the Constraint Editor's document view. (BC:20587)
54747	Repouring of polygons would take a lot longer if logo graphics had been added to the Top and/or Bottom copper layers. (BC:20171)
54819	When viewing the Assembly Drawing output (in an OutJob) through the new Print Preview dialog, the display of some mechanical layers was being mixed up.
54865	Optimized and increased performance when dragging vias, especially in large designs.
54883	Optimized and increased performance when removing net classes, especially in large designs.
54901	For a specific design, closing the PCB document resulted in an Access Violation (at address 000000016831354C in module "ADVPCB.DLL").
54908	Optimized and increased performance when making changes to and saving the layer stack, especially in large designs.
55124	When opening a PCB containing pads with Slot Hole Size > Length, the error "Assertion failure (D:\Build\X2\Main\x2\rtl.epd\RT_Geometry.pas, line 13723)" would be encountered. (BC:20897)

Multi-board

54408

When importing changes from a child PCB project into the parent multi-board project, Mated Parts/Pins data was being cleared instead of updated.

Draftsman

50911	When copying a callout in a specific Draftsman document, the error "System.InvalidCastException: Unable to cast object" would be encountered.
51398	The Description field in a placed Drill Table was not being correctly populated with the description defined in a Pad/Via Template. (BC:8816)
54549	In some cases when reconnecting an RDP session during board update, the error "SharpDX.SharpDXException" would be encountered.

Harness Design

53134	Accelerator keys have been added to the menu entries for harness design objects (in Wiring Diagram and Layout Drawing), facilitating placement using shortcut keys.
53510	The 'Clear Filter' command is now available on the right-click context menu in both Wiring Diagram and Layout Drawing documents.
53566	Added a new Harness Covering object for use in the Layout Drawing to place covers over bundles with the ability to tune the length of the cover graphically.
53577	When using Ctrl+Z to undo movement of a connector in the Layout Drawing, the graphical link between that connector and its connection point was not being included in the undo.
53665	Support is now available for adding user-defined parameters to a Connection Point object in the Layout Drawing.
53766	The Edit » Select » Connection command was not functioning correctly in the Wiring Diagram and Layout Drawing editors.
53850	Support is now available for adding user-defined parameters to a Layout Label object in the Layout Drawing.
53851	Added ability to define the background color for a Layout Label object in the Layout Drawing.
54315	When attempting to cross-probe from the BOM document to the Layout Drawing, the error "The method or operation is not implemented" would be encountered.
54350	Added Designator and Comment properties to the Harness Bundle object in the Layout Drawing.
54500	Multi-line text is now supported for the Layout Label object in the Layout Drawing. (BC:20469)
54576	For the Draftsman Connection Table object, column names WireDesignator, WireColor and WireLength have been renamed to Designator, Color and Length, to align with BOM and Wiring List tables.
54740	In nested multi-board projects, a harness project would always import data from the top-level multi-board project instead of the multi-board project to which it was associated.
55008	Updated the icons associated with the Harness Bundle, Connection Point and Layout Label objects in the Layout Drawing.

Platform

54553	In some cases when accessing the Home page, the error "System.Exception: Cef.Shutdown must be called on the same thread that Cef.Initialize was called" would be encountered.
54690	In some cases, Altium Designer would be terminated by Windows if the file "Project Group 1.DsnWrk" was not accessible.
54818	Menu entries for creating a VB Script Unit/Form were not presented when enabling the Legacy.Scripts.SupportOldLanguages Advanced Settings option.
54840	Altium Designer would terminate when trying to create a new PCB project and including the extension (*.prjpcb) as part of the project's name.

Data Management

52525	The menu to create a new project based on active process definitions (workflows) was not visible when the Home page was the active document tab.
52975	With File Locking enabled, using the "Revert to" feature from a Commit event tile in the project's History view would result in an error.
53462	It is now possible to add a comment with an image to a General Task.
54252	Commit tag and release names are now displayed for comments when accessed in Altium Designer.
54506	In some cases when using the Library Importer, the exception "System.Exception: Get component type tag list error" would be encountered.
54542	In some cases when opening a managed project, the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered.
54554	In some cases, the error "System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation" would be encountered.
54666	For a specific design project and Git repository, the preparation stage when using the Project Releaser would take over three minutes.
54692	When scrolling through the list of templates in the Edit Templates dialog, links to Component Types were being removed from the Component Templates.
54752	An "Access Denied" error would be encountered when opening a document of a Workspace project, while connected to a different Workspace (not the one in which that project resides).
54764	In some cases when adding a Part Choice to a component in the Single Component Editor, connection to the Workspace would be lost and the error "Vault is disabled" would be encountered.
54832	The redundant 'Install from server' and 'Edit' controls have been removed from the Data Management - File-based Libraries page of the Preferences dialog.
54844	It was not possible to define a component type for a component template that had no name.
54855	It was not possible to fully migrate, with history, a rehosted Workspace (that used an external SVN repository) to the Altium 365 Workspace's native Git repository (Versioned Storage).
54869	The Save All command on the right-click context menu for a project's Source Documents entry (in the Projects panel) was not available after having modified a source document. (BC:20766)
54875	When switching component templates for a component in the Component Editor (SCE mode), required parameters from the previously chosen template were still shown as mandatory. (BC:20772)

Import/Export

52872	When importing a specific Xpedition library using the Import Wizard, 3D bodies with a height of 0mm were incorrectly set to a height of 0.254mm (10mils) in the resulting PcbLib.
54089	In some cases when importing OrCAD and PADS designs/libraries using the Import Wizard, an Access Violation (in module "Importer_PADSOrcad.IWZ") would be encountered.
54093	In some cases when importing OrCAD designs/libraries using the Import Wizard, an Access Violation (in module "Orcad7ld.dll") would be encountered.
54657	In some cases when importing a 99SE design database (*.ddb), the error "EOleException: Compilation controller doesn't exist" would be encountered.

Simulation

54101	Added support for interactive probes to investigate a circuit and see real-time updates to the data in the generated SDF file. (BC:19869)
54434	A redundant and partially visible control at the bottom of the Measurement Plot dialog has been removed.
54435	When viewing measurement data in a Measurement Table (chart), the horizontal scrollbar was not working correctly.
54493	A redundant verification was being performed when switching between the analysis results and the Schematic document.
54520	The redundant option "Show Sim Data panel" has been removed from the Document Options dialog for the Sim Data Viewer.
54589	Added support for multi-bit DAC and RAM PSpice digital model primitives (and their related timing models) and Bidirectional Transfer Gate PSpice digital model primitives (PBTG, NBTG).
54716	In some cases when working with the Sim Data Viewer, the error "EOutOfResources: Error creating window device context" would be encountered.
55025	When trying to print from an SDF file containing multi-variable analysis results, errors would be encountered along with some waveforms not visible in the print preview.
55056	Variable R, L and C components in a sub-circuit were not being processed correctly when running a transient analysis, leading to an error in the format "unknown controlling source edq.c".

Version 23.4.1

Build: 23 Date: 14 April 2023

Schematic

51351	When dragging all circuitry on a sheet, a power port was being included in a blanket's net class parameter set when that blanket covered the power port's original position.
53734	For a specific design, opening a particular variant, or attempting to generate output for two specific variants, caused Altium Designer to hang.
53837	When opening a specific design, initial incorrect location of a schematic sheet led to the error "Load file error, Disagreement of basic reuse block list with 1st extension list".
54134	In some cases, the EOleException "Impossible d"effectuer un cast d"un objet COM de type "System.__ComObject" en type d"interface "RT_Workspace.IWorkspace" would be encountered.
54135	In some cases, an Access Violation (at address 0000000147252B3B in module "AdvSch.dll") would be encountered.
54312	There was no check for parameter indirect recursive reference (e.g., Comment = Value, Value = Comment), which resulted in the software hanging.
54354	For a specific project, generating schematic prints from its OutJob led to the error "Unable to cast COM object of type 'System.__ComObject' to interface type 'RT_Workspace.IWorkspace'".

PCB

48430	In some cases when working in the PCB, an EAccessViolation (at address 000000016A57C852 in module "ADVPCB.DLL") would be encountered.
53603	The Silkscreen Preparation tool was not taking into account changes to values in the Solder Mask Expansion for SMD/TH pads in the PCB/PCBLIB. (BC:20104)
53989	When exporting a PCB to STEP 3D or PARASOLID format, the layers were shifted in the resulting model for regions in which there is a Stiffener layer. (BC:19516)
54119	When applying a 'same net' clearance rule between two objects, the software was enforcing a different rule for DRC, instead of the rule shown in the 'Applicable Binary Rules' window.
54169	Stacked thru-hole pads and vias now have their hole shapes (all types) checked to detect if one is completely within another to avoid generating duplicate drill holes in the Drill Table.
54291	A specific STEP model was being incorrectly exported (as a single part) to STEP 3D format when the PCB.OpenCascadeLatestVersion advanced option was enabled.
54308	For a specific board, moving and repouring a polygon pour would result in the previous pour area remaining visible, with no way to select or disable from view.
54360	When placing an unconnected SMD pad on a solder or paste mask layer, running a DRC would incorrectly flag an Un-Connected Pin violation.
54424	A catastrophic error would be encountered when placing a new pad on an existing polygon pour, and that pour had a measurement marker associated with it.

Draftsman

53058	In some cases where board holes contained primitives on the Multi-Layer, the error "System.IndexOutOfRangeException: Index was outside the bounds of the array" would be encountered.
53059	In some cases when exporting a Draftsman document to PDF, the error "EOleException: WidthAndHeightCannotBeNegative" would be encountered.

Harness Design

52434	In the Harness Draftsman document, a callout associated with a connector will now show all BOM line numbers for its associated parts.
52435	In the Harness Draftsman document, a callout associated with a connection point will now show all BOM line numbers for its associated parts.
53561	When placing a wire in the Wiring Diagram, the netlines now track/refresh 'live', showing you where you need to wire in real-time.
53565	In the Wiring Diagram, the Harness Cable, Shield and Twist objects all now have fixed aspect ratios.
53567	For a connection point on the Layout Drawing, it is now possible to display the Physical (3D) model of one of its associated parts.
53575	In table objects within Draftsman, wire colors are now presented with a color graphic next to the textual color name.
53578	Clicking on a connection point at the place where it connects to a bundle will now correctly select the connection point and not the bundle.
53635	Menus and applicable resources for the harness design editors have been cleaned up to remove elements not related to harness design.
53696	It is now possible to place 'No Connect' symbols into the Wiring Diagram from the main Place menu.
53755	In Draftsman, the graphics for Cable and Shield objects differed from those in the actual Wiring Diagram. Also, there was graphical distortion of line endings in an exported PDF.
53756	Attempting to use the Replace Text or Find Next commands in the Wiring Diagram or Layout Drawing would result in an error being encountered.
53769	An error would be encountered when attempting to access the Formatting toolbar in the Wiring Diagram Editor.
54077	Length information for the Draftsman Wiring List and Connection Table objects was taken from wiring length parameters and not calculated based on layout bundle lengths. (BC:20331)
54208	On the Layout Drawing, it is now possible to show the Physical (3D) model for a connector as a wireframe view.
54228	Connectivity graphs were being incorrectly included when importing data from the Layout Drawing to the Draftsman document.
54281	In the Documentation Outputs section of an Output Job, the entry for Draftsman was disabled.
54313	In some cases when working with a harness design document, the following error would be encountered: "System.NotImplementedException: ƒƒ\ƒbƒh‚Ü‚½‚Í‘€ì‚ÍŽÀ‘•‚³‚ê‚Ä‚¢‚Ü‚¹‚ñB".
54391	An error would be encountered ("The method or operation is not implemented") when attempting to use the arrow keys to move the cursor position in the Wiring Diagram or Layout Drawing.
54455	Implemented Formatting toolbar features "Line Or Border Width", "Line Style" and "Polyline Arrows Presets", when working with wires, bundles and lines (as applicable).
54603	When opening a Draftsman document having different numbers of columns for Wiring List and Connection Table, the error "Object reference not set to an instance of an object" would occur.

Platform

54073	In some cases, the error "System.ServiceModel.FaultException: Access denied! User login required for this service" would be encountered.
54753	An issue with the Altium OpenBOM Extractor extension (v1.0.2787.0) was causing an Access Violation (in module "X2.EXE") when accessing the right-click context menu in the Projects panel.

Data Management

53586	The Schematic Compare feature was not functioning when accessed from within the Storage Manager panel. (BC:19464)
53653	The actionable statuses feature (Projects panel) was not working for project files having the VCS status of 'Missing'.
53664	From the Shared with Me area of the Altium 365 Platform Interface, the control to open a shared project in Altium Designer was not working.
53787	In some cases when working with component part choices, the following error would be encountered: "Altium.Edp.SupplyChain.Contracts.Exceptions.VaultNotFoundException: Server not found".
53940	There was no graphical icon associated to the Project Group entry in save-related dialogs.
53955	The actionable statuses feature (Projects panel) was not working for deleted project files.
54259	In some cases when attempting to migrate a project from external SVN to a Workspace's internal Git VCS, an error would occur when processing the history for a specific version.
54297	For a specific Workspace, the error "An item with the same key has already been added" would be encountered when attempting to add a Part Choice to certain components.
54311	For projects in a specific Workspace, the error "Value cannot be null. Parameter name: path" was being encountered.
54486	An exception was encountered when working with the LibGit2 library and files with long paths.
54555	In some cases when working with Project History, the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered.

Import/Export

53786	For a specific design exported (as a single part) to STEP 3D format (with PCB.OpenCascadeLatestVersion enabled), a specific STEP model was failing to load in MCAD software.
54092	In some cases when importing Expedition designs using the Import Wizard, an Access Violation (at address 00000001A6A7ABA6 in module "Importer_Expedition.IWZ") would be encountered.
54125	When importing KiCad libraries, any failure would result in the Importer stopping and ignoring all subsequent files, instead of giving an error message and allowing import to proceed.

Simulation

46037	Support added to the VCVS model for voltage, power and current output variables in AC analysis.
46038	Support added to the VCCS model for voltage, power and current output variables in AC analysis.
46039	Support added to the CCCS model for voltage, power and current output variables in AC analysis.
46040	Support added to the CCVS model for voltage, power and current output variables in AC analysis.
48096	Pin mappings for the VCSW components in the Simulation Generic Components library were incorrect (signal pins of the symbol mapped to control pins of the model and vice versa). (BC:20374)
53874	Global parameter values exported from a SPICE library during model extraction were not being enclosed in curly braces in the generated netlist (*.nsx).
53875	Global Parameters used in a model's description were not being extracted from the library.
53877	The constant VT, with value 25.86mV, has been added to the expression parser.
54042	The model for the Photodiode component in the Simulation Generic Components.IntLib was incorrect, leading to an 'Unknown' parameter warning and simulation error.
54137	Added support for multi-bit ADC and ROM PSpice digital model primitives (and their related timing models).
54273	Support added to functional sources and variable passive components for voltage, power and current output variables in AC analysis.

Version 23.3.1

Build: 30 Date: 16 March 2023

Schematic

53014	The IEEE Symbol "Open Emitter Pull-up" was incorrectly labeled. It has now been changed to "Open Emitter Pull Down".
53244	When using the new Variant Manager, changes to parameter values and names were not being retained. (BC:19912)
53668	In some cases, the EOleException "Specified argument was out of the range of valid values. Parameter name: Unhandled value for TUnit: eDXP" would be encountered.
53935	While open, the ActiveBOM document will now refresh automatically when any related Workspace Library components are modified and saved back to the connected Workspace.
53947	The cross reference information for a port would suddenly jump to the wrong side when directly moving the port from one wire to another.

PCB

50127	In a specific case when copy-pasting a component that is part of a union, saving and opening the target PCB would result in an Access Violation being encountered.
51041	When generating Gerber/Gerber X2 output, regions of copper were being removed from footprints when the "Merge regions and pads inside Footprint" option was enabled.
52128	In some cases, an Access Violation would be encountered when working with comments on the 2D PCB and having the 'Hide pins on design' control enabled (on the Comments and Tasks panel).
52751	In some cases, exporting a PCB to STEP would result in some models not being visible. (BC:19667)
52757	For a specific design, DRC was incorrectly flagging an 'Un-Routed Net Constraint' violation for a hatched polygon that truly had a connection to a pad.
53076	In some cases, dragging a track would result in a silent crash/termination of Altium Designer. (BC:19855)
53607	For a specific design and preferences, an Access Violation (in module ADVPCB.DLL) would be encountered after attempting to drag a track.
53680	Using and configuring the "Enable Fonts Replacement" feature in the Preview dialog did not result in the Stroke fonts being substituted with TT fonts in printed material. (BC:20178)
53684	False clearance violations were being returned for primitives placed on overlapping board regions in Advanced Rigid-Flex mode. (BC:20034)
53825	When exporting a board containing STEP models to Parasolid format (as a single part), some solids were being incorrectly changed to surfaces.
53852	SMD Round Rectangular, Chamfered Rectangular and Custom Shaped pads placed on Solder or Paste layers were not included in generated Gerber, GerberX2 and ODB++ outputs. (BC:20379)
53931	In some cases when viewing the PCB in 3D, double-clicking on a comment entry in the Comments and Tasks panel would result in an Access Violation.
54225	In some cases, an Access Violation would occur when interactively routing using the 'Any Angle' corner style and 'Push Obstacles' mode.

Multi-board

52857

When removing the 'System: Connector' parameter from a child project's PCB connector, the multi-board schematic was not recognizing that removal and synchronizing correctly.

Harness Design

52638	In the Wiring List table object (on a Draftsman document), the 'Gauge' parameter was incorrectly labeled 'Guage'.
52753	When removing a connection point, the two bundle sections either side are now merged into a single bundle.
53215	In the Layout Drawing when adding objects to a Connection Point, the label on the Properties panel (and associated dialog) is now 'Assigned Objects' instead of 'Connectors'.
53218	When placing bundles on the Layout Drawing, 'Any Angle' is now the default placement mode when first opening the document, followed by the last style used during the current session.
53573	The Layout Drawing now supports the Connective Graph feature, to be able to see which connectors are connected to each other.
53587	The UI for defining multiple views of the physical model for a harness component on the Layout Drawing has been further enhanced.
53616	Added the possibility to freely move multiple physical views for a harness component, on the Layout Drawing, independently of one another.
53651	When importing from a multi-board schematic into the Wiring Diagram, not all same-named nets were being imported.
53689	Added Copy and Paste functionality to the Crimps tab of the Properties panel (with a harness component selected on the Wiring Diagram or Layout Drawing).
53718	When assigning objects to connection points you can now see if they are already assigned elsewhere. A warning is also given when attempting to assign an object that is already assigned.
53738	The correct UniqueIDs of crimps/associated parts are now shown in the BOM.
53784	In Draftsman, scaling functionality is now available as part of the properties for the Wiring Diagram View and Layout Drawing View objects.

Platform

53170	In some cases, an Access Violation in module "X2.EXE" would be encountered when attempting to move panels between multiple monitors and with Altium Designer split into multiple windows.
53546	When opening a file using the File » Open command, the "All files (.)" entry is now always at the bottom of the list in the Choose Documents to Open dialog.
53856	From this release, Altera/Lattice/Xilinx/Simulation folders and Miscellaneous IntLibs are no longer part of a default installation. Updating will remove these from the \Library folder.
54021	In some cases, a crash report contained only a single line in the thread callstack.
54199	Added support for native images batch removal, making it quicker to uninstall Altium Designer when multiple instances are installed on the same computer.
54290	The error "System.ArgumentNullException: Value cannot be null. Parameter name: binding" would sometimes be encountered when selecting text in a Draftsman document. (BC:20550)

Data Management

49599	In some cases, exporting components from a Workspace Library to an Integrated Library would result in missing parts, or missing symbol/footprint models.
53418	When deleting a Project, BOM or Output Job template through the Explorer panel, the template would still be listed for use in areas of the UI where the template could be chosen. (BC:19991)
53753	The Library Importer was not able to import libraries containing components with linked simulation models (mdl, ckt).
53764	It was not possible to set up a local VCS repository to use the SVN + SSH protocol.
53765	A project would be marked as 'modified' when preparing the data for release using the Project Releaser.
53803	With Part Choices Revision Control enabled for the connected Workspace, it is now possible to create/edit part choices for multiple selected components in the Components panel.
53808	Workspace-side project parameters are now supported in Draftsman documents and BOM reports.
53815	In some cases when working with managed components, the following error would be encountered: "System.ServiceModel.FaultException: Access denied! User login required for this service".
53854	In a specific case, the error "Invalid URI: The hostname could not be parsed" was being encountered when accessing the File menu (Alt+F).
53865	In the applicable areas of the UI for managing Part Choices, the menu entry "Create/Edit PCL" has been renamed "Create/Edit Part Choices".
53878	With Part Choices Revision Control enabled for the connected Workspace, it is no longer possible to change ranking for a part choice directly from the Explorer panel.
53917	With Part Choices Revision Control enabled for the connected Workspace, the comparison of part choices (when comparing component revisions) has been enhanced.
53927	In a specific case, the member projects of a saved Project Group (*.DsnWrk) were not visible when that Project Group was closed and reopened.
53944	When batch editing components, changes to part choices would be lost after release if at least one component had a part choice assigned from a custom supplier (local parts database).
53953	When direct editing a Layer Stack item in a Workspace, the document would appear incorrectly in the Free Documents section of the Projects panel after saving.
53985	The 'Welcome to Workspace Library' screen no longer appears in the Components panel when actively working with managed components, including navigation from Web Viewer. (ВС:20321)
54008	A progress bar has been added when releasing a project and publishing it to Teamcenter EDA PLM (using a Workflow process).
54025	When attempting to clone an open Workspace project for which shared access has subsequently been removed, an empty error dialog would be encountered.
54029	It was not possible to remove auto-generated parameter entries from the Parameter Import Options region of the Data Management - Parts Providers preferences page. (BC:20384)
54048	In the Library Importer UI, the entry for 'Decibel' was incorrectly spelled 'Dicebel'.
54123	For a specific local PCB project, a catastrophic failure was encountered when attempting to make the project available online (to the connected Workspace).

Import/Export

52852	In some cases, attempting to import an Xpedition design would result in a "File not found" error being encountered.
52863	When importing an Xpedition Library footprint, the pad size was overlapping the region (custom pad) on the top layer.
54006	After exporting a PCB containing custom pad shapes to HyperLynx format, the resulting *.hyp file could not be opened in HyperLynx.
54016	For a specific DXF file, the AutoCAD Importer would throw a message that modification was not permitted with the current license and that changes were being rolled back.

Simulation

53772	Added support for PSpice Programmable Logic Arrays and digital models that use global nodes ($D_HI, $D_LO, $D_X).
53791	Added support for variable passives (resistor, capacitor, inductor).
54038	Changing the Integration Method (in the Advanced Analysis Settings dialog) had no effect on the simulation.

Power Analyzer

52837	It was not possible to probe a via on a heatmap. The probe value was the reading from the heatmap itself (Voltage Drop or Current Density) instead of the value for the pad's Via Current.
52840	It is now possible to use several extended components in parallel.
53330	In some cases, an Access Violation would be encountered after deleting a net from the *.pdnaK document.
53743	An incorrect Via Current calculation was being used for Thru-Hole vias.

Version 23.2.1

Build: 34 Date: 15 February 2023

Schematic

46489	For a specific case, it was not possible to change the font size for a placed text string from 28 to 12 using the drop-down field on the Properties panel.
51425	When defining variants with the Variant Manager, you now have the ability to update the values of parameters for a varied component with changes made in the source library.
52284	In some cases, dragging multiple free Schematic documents into an open project would take an excessive amount of time.
52296	In a specific case, the error "System.NullReferenceException: Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt" was encountered.
52585	For newly created projects and newly added schematics, the option to Generate Rooms is now disabled by default on the Class Generation tab of the Project Options dialog.
52654	In some cases when working with ports and their Harness Type through the Properties panel, the error "EOleException: Property: "HarnessType" not found" would be encountered.
52657	For a specific project, attempting to generate a BOM led to an error due to a hidden and empty parameter name for a component.
52947	In some cases, an Access Violation "at address 000000014819C5F2 in module "AdvSch.dll"" would be encountered.
53361	When referencing a component in an IntLib as an alternate part for a defined variant, the result would be "Footprint Not Found" in both the ECO and Footprint Manager dialogs. (BC:19477)
53780	When managing variants using the new Variant Manager, the state of the "Allow variation of fabrication outputs" and "Allow variation for paste mask" options was not being saved. (BC:20150)
53817	An error would be encountered when trying to place a high-res image onto a schematic document.
54010	In some cases, Net labels with differing font sizes would lose their specific font sizing when multi-selected.

PCB

47012	When generating ODB++ output, CAMtastic no longer displays the comp_+_top and comp_+_bot layers.
47014	Via Length was incorrectly being set to '0' when placed at the end of a track and snapping had been disabled.
47067	Where a stack has a Coverlay layer but no Solder Mask layer, expansions for free primitives were not being generated on the Coverlay layer in Gerber, Gerber X2 and ODB++ output.
51299	An Access Violation would occur when, after running a Batch DRC and accessing the Violation Details dialog, the rule was then accessed and deleted.
53044	In some cases, such as deleting a bending line in Board Layout mode, undoing/redoing then returning to 3D Layout mode, the error "EListError: Item not found." would be encountered.
53173	In some cases when defining an area for print, the error "System.InvalidOperationException: DialogResult can be set only after Window is created and shown as dialog" would be encountered.
53249	Arcs in a tuning pattern were not inheriting the solder mask expansion rule from the segment to tune.
53255	In a PCBLib, solder/paste mask expansion values for custom pad shapes would change to '0' when disabling PCB.Pad.CustomShape or opening in an older version of Altium Designer. (BC:19942)
53319	The unified Gerber Setup dialog now presents sections for groups of layers based on defined layer classes (both default and user-defined).
53335	For variants created using the new Variant Manager, there were cases of missing or extra models when viewing a variant for the PCB in 3D layout mode.
53395	For a design using Printed Electronics, legitimate clearance violations were not being flagged when EngineX options were enabled in the Advanced Settings.
53427	Defined solder mask for custom pad shapes is not displayed in any of the areas of Altium Designer where the Footprint Preview can be seen.
53464	DRC was incorrectly reporting Component Clearance rule violations due to rounding errors.
53499	When exporting to AutoCAD, layer names defined through the Layer Stack Manager are now used by default, rather than internal system layer names. (BC:18335)
53545	It was not possible to adjust object visibility settings for a layer using shortcut keys in the Print Preview dialog.
53580	For a PCB with Metric Display Precision set to 5 digits, angles were incorrect when exporting the board to STEP. (BC:7211)
53638	The openings for custom pad shapes on the top/bottom coverlay layers were not being exported when generating Gerbers.
53648	In some cases when closing a PCB document, the exception "System.NullReferenceException: Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt" would be encountered.

Draftsman

50207	For a specific document, an invalid Board Section View led to a "System.NullReferenceException" error being encountered.
50208	For a specific document, an invalid Transmission Line Table led to the error "EOleException: Index was outside the bounds of the array" being encountered.

Harness Design

52905	When adding a connection point to a bundle, any existing label was being placed underneath the newly-created bundle section.
52907	In the BOM document associated with a harness design, an item was still being displayed after it had been deleted.
52992	On a Wiring Diagram when placing a wire from a Tap to a pin on a target connector, the wire was not being named (wasn't taking the logical signal name).
53039	From the Crimps tab for a selected Harness Connector, it is now possible to quickly add a selected crimp to all pins of that component.
53083	On the Wiring Diagram, when placing a new wire starting from an existing wire a splice will now automatically be created.
53113	On the Layout Drawing, connection points placed on a bundle were not being moved with that bundle when it was dragged.
53214	On the Wiring Diagram, when assigning a splice to a different connection point it will now be removed from the previous connection point.
53216	When copying/pasting objects on the Wiring Diagram, designators now follow the "Reset Parts Designators on Paste" option on the Schematic - Graphical Editing page of Preferences.
53511	The Find Similar Objects feature is now supported for objects in both the Wiring Diagram and Layout Drawing.
53589	Icons used for objects on the Wiring Diagram's Active Bar and menus have been updated.
53614	When using a connector from a local library on the Layout Drawing, scaling of that connector's physical view would not work correctly when the Width and Height were linked.
53652	A crash would occur when attempting to use the Toggle Electrical Grid and Set Snap Grid commands from the main View>>Grids sub-menu, in the Wiring Diagram or Layout Drawing.
53957	When importing the Wiring Diagram into the Layout Drawing an Access Violation would occur if any parameter had been added to a cable object beforehand.

Platform

53293	In some cases when closing a document containing an Active Bar and that document was open in a secondary window, an AV "at address 0000001400C1490A in module "X2.EXE"" would be encountered.
53315	In some cases, Altium Designer would hang when trying to reconnect to the notification service, for example when the computer is awakened after hibernation.
53485	Incorrect alignment of field labels for Layout Connection Point, No Connect and Splice objects, on the Harness Design - Defaults page of the Preferences dialog.
53733	The System.ExceptionReport.CatchAll option (OFF by default) has been added to the Advanced Settings. When enabled, any encountered exception will create a crash report.

Data Management

52307	A message will now be displayed in the Messages panel when attempting to release a project with configured Project History report to a Workspace that does not support this feature.
52526	When generating a report from the new Variant Manager, parameters for alternate parts were being lost. (BC:19615)
52614	When performing a search in the Explorer panel, the results now default to showing the latest version only. (BC:19459)
52955	There was a noticeable slowdown in performance when connecting to a Workspace due to the process of loading component templates and categories.
53012	For a specific project including a large amount of source schematic documents, release to a Workspace using the Project Releaser would take more than 4 minutes.
53099	It is now possible to modify Item Naming settings (in the Project Release Options dialog) for a project template after its release.
53126	In some cases, opening the History for a component from the Explorer panel would result in an Access Violation "at address 000000013B609374 in module "EDesignData.DLL"" being encountered.
53162	In some cases, resetting Data Management preferences to their defaults then reconnecting to a Workspace would lead to a runtime error and Altium Designer becoming unresponsive. (BC:19924)
53174	In some cases when working with the Explorer panel (or a dialog variation of it), the error "System.Reflection.TargetInvocationException" would be encountered.
53196	In some cases when working with comments, the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered.
53534	In a specific case when working with Part Choices, the error "EInvalidAccessToObject: Vault is disabled" was encountered.
53556	In a specific case, there was a noticeable slowdown in performance when releasing a project to an external Git repository using the Project Releaser.
53658	The actionable statuses feature (Projects panel) has been disabled for Workspace items that are being directly edited (file-less editing).

Simulation

53358	Added support for the PINDLY PSpice digital model primitive.
53359	Added support for the CONSTRAINT PSpice digital model primitive.
53360	The simulation option DIGERRDEFAULT is now available to control the amount of reported constraint violations in digital primitives.

Power Analyzer

53490

Segments connected through microvias were not being simulated.

Version 23.1.1

Build: 15 Date: 17 January 2023

Schematic

45539	When attempting to move a sheet symbol with circular dependency, the error "HierarchyPath is empty" would be encountered.
47590	Information copied from a spreadsheet into a schematic would not appear the same in generated PDF output.
49159	The physical names for bus net labels were not presented on the compiled tab for a Schematic, nor in a generated PDF of the schematic prints (physical documents). (BC:16931)
49174	The Schematic document would lose focus after using the Jump Component (J, C) feature. (BC:17913)
49642	The 'Compiled Names Expansion - Net Labels' option now determines the naming for a Power Port object on the compiled (physical) tab of a Schematic. (BC:14638)
51258	In some cases, the error "Property: "HarnessType" not found!" would be encountered when performing a port-sheet entry sync, and placing a harness port on a new schematic.
51355	In some cases, the error "System.ArgumentException: An item with the same key has already been added" would be encountered.
51528	When using the new Variant Manager, the Filter button now indicates when filtering is being applied.
52295	In some cases, the error "System.ArgumentNullException: Värde får inte vara null. Parameternamn: value" would be encountered.
52660	In some cases, the error "EOleException: Value cannot be null. Parameter name: key" would be encountered.
52662	In some cases, the error "EOleException: An item with the same key has already been added" would be encountered.
52664	In some cases, the error "EOleException: Object reference not set to an instance of an object" would be encountered.
52668	In some cases, creating a sheet symbol from a sheet (using the right-click context menu command) would lead to an EOleException.
53106	It was not possible to add the same alternate part to more than one BOM item or alternative group.

PCB

47198	For a specific design, running a batch DRC including a Creepage rule would result in an Access Violation.
49923	It is now possible to change the name for the Gerber Board Profile layer when using the new, unified Gerber/Gerber X2 dialog.
51799	When generating a default NC Drill file from an Output Job, the Start Units were being incorrectly changed.
52036	With the new Variant Manager enabled, 3D models were not being displayed for a variant using an alternate part with the same footprint.
52231	In some cases, PCB Models exported to STEP or PARASOLID formats would not show board cutouts, and layers were being shifted (when using Advanced Rigid-Flex mode). (BC:19635)
52540	For a specific design, an arc was being converted to a full circle when generating Gerber/Gerber X2 data in the 4:2 format.
52773	In some cases, the Access Violation "EOleException: Value cannot be null. Parameter name: key" would be encountered.
52939	In some cases, when attempting to generate Gerber data with the new Gerber setup dialog, the error "EStringListError: List index out of bounds (2)" would be encountered.
52980	For a design using Printed Electronics, legitimate short-circuit violations were not being flagged when EngineX options were enabled in the Advanced Settings.
53003	For a specific design, placing track on an internal plane (GND) layer would result in Altium Designer closing without any warning or error notification.
53191	Added the ability to load a stored view configuration file from the View Options tab of the View Configuration panel. (BC:11267)
53221	When printing documentation from the new Preview PCB dialog, the coloring for some labels in the UI meant they were unreadable when using Altium Designer in its Light Theme. (BC:19896)
53223	In some cases, the error "EInvalidPointer: Invalid pointer operation" would be encountered.
53225	For a specific case, an error would be encountered when clicking on the mode selection field at the top of the PCB panel.
53230	The X/Y values for Rounded Rectangle and Chamfered Rectangle pads were not being saved correctly.
53506	An error occurred when 'Object Kind' was set to 'Different' in the Find Similar Objects dialog.

Multi-board

53030

For a specific design, a catastrophic failure would be encountered after selecting a PCB on the Multi-board Assembly document, then right-clicking to access the context menu.

Harness Design

52447	It is now possible to add multiple objects to a connection point in a single operation.
52610	Added Auto Size and Justification properties for the Wiring Diagram View and Layout Drawing View objects in a Harness Project Draftsman document (*.HarDwf).
52680	In some cases when sharing a Harness design project, crimps and associated parts for components were not being included in the share.
52718	In some cases, incorrect connector parts were being brought into the Layout Drawing from the Wiring Diagram.
52893	It was not possible to sync a parameter, added to a connector, to the Harness Design project's ActiveBOM.
52928	Added support for parameters to Twist and Shield objects.
52929	As part of the support for crimps, a crimped pin is visually distinguished for a Harness Connector on the Wiring Diagram.
52930	It is now possible to add crimps to the Wiring Diagram using the new Crimps tab on the Properties panel, with the required Harness Component selected.
52931	Added the ability to add multiple different 3D model views for a connector in the Layout Drawing.
52933	Added headings for the presented information on the Crimps and Associated Parts tabs on the Properties panel for a selected Harness Component.
52934	Added the ability to save harness documents in ASCII format.
52976	A connection point automatically created with a connector on import from the Wiring Diagram would not follow a change in rotation of that parent connector.
52990	The ability to download and open a specific revision of the project (using the Download Sources command for a Commit event tile) is now implemented in the project's History view.
53060	A harness project in a connected Workspace presented in the Projects panel, and elsewhere, with no associated icon.
53068	After modifying the width of a selected bundle, it was not possible to Undo the change and revert back to the previous width.
53091	When generating a PDF of the Layout Drawing, 3D model bitmap views of connectors were not being drawn with a transparent background.
53524	An exception could occur when attempting to edit the properties of a crimp in the Harness Component modal properties dialog.

Platform

52895	An exception occasionally occurred when clicking on a control in the CST PDN Analyzer or Power Analyzer by KeySight UI.
53331	F1 mapping from the software to target Technical Documentation now correctly points to version 23 paging.
53412	Added an advanced method for creating the callstack as part of crash reports, enabled by default in Advanced Settings (System.ExceptionReport.AdvancedCallstack).

Data Management

47524	In some cases, not all available datasheets were presented when trying to acquire a component found using the Manufacturer Part Search panel.
52277	Added the ability to export Project History to PDF directly from the Schematic or PCB Editor’s main Reports menu.
52598	In some cases, when searching for parts, the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered.
52767	When closing a newly-cloned (and unsaved) component, the Unsaved Changes dialog would present the wrong name for the component. (BC:19670)
52912	The Show Project History command is now available on the History & Version Control sub-menu for a multi-board project.
52918	For a specific project VCS-controlled via GitLab, Altium Designer would freeze for 20 seconds when saving (locally) a Schematic or PCB file. (BC:19764)
52940	In the Component Editor (SCE mode), the Type field has been moved out from the Advanced Settings (which now auto-expands only if a required field is empty).
52962	There was a noticeable slowdown in performance of the Components panel when first connecting to the secure Altium portal (Altium Account Management Server).
53049	In some cases, when working with components, the error "System.NullReferenceException: Object reference not set to an instance of an object" would be encountered.
53295	Active Project Creation Workflows were not available from the Projects panel when right-clicking on the Workspace name and choosing Create Project from the context menu.

Import/Export

53013	For a specific KiCad design, the importer would only bring in components and no routed track.
53413	When exporting a PCB to DXF/DWG format, all layers were being exported on the '0' layer when viewed in AutoCAD. (BC:20041)
53452	For a specific design, attempting to generate DXF/DWG output through an Output Job would result in an exception being encountered.

Simulation

53032	The Simulation Dashboard panel would not correctly present the simulation profile when switching from a free document, to a schematic source document in a project.
53041	Added support for the SRFF PSpice digital model primitive.
53042	Added support for the DLTCH PSpice digital model primitive.
53043	Implemented inertial delay processing for all PSpice digital gates (except DLYLINE).

Power Analyzer

52247	For a specific design, simulation resulted in the Solver erroneously generating microsegments with unrealistically high consumption.
52261	Values for Current Density and Via Current differed between the main document and the panel.
52811	Added the ability to request a free 14-day trial to use the Power Analyzer by Keysight extension and its functionality.
53093	For a specific design, an error would be encountered after setting load currents for the pins of a particular component and saving.
53269	An exception would be encountered when showing analysis results on a PCB containing a duplicate layer ID.

Version 23.0.1

Build: 38 Date: 15 December 2022

Schematic

51354	In some cases, the "System.ArgumentOutOfRangeException" would be encountered.
51839	Brought back the autosizing feature for ports, enabled by default for a fresh installation (with no imported preferences) and only for newly-placed port objects. (BC:17706)
52294	In some cases, the EOleException "Object reference not set to an instance of an object" would be encountered.
52782	The error 'A given document's ID is invalid' was encountered when trying to add more than three Draftsman documents to a design project. (BC:19523)
52942	In some cases, the error "EOleException: The specified argument is outside the range of valid values" would be encountered.

PCB

47341	The Dimmed Objects slider bar (View Options tab of View Configuration panel) was returning to the default position after closing and opening Altium Designer. (BC:10232)
50376	When generating ODB++ data, the pin data in the components file was incorrectly including the designator of the component, instead of just the pin number.
51851	When using the new Variant Manager, there were some cases where the error "Dispatcher processing has been suspended" would be encountered after clicking on the value for the Description parameter.
52052	Added a Silkscreen Preparation tool to the PCB/PCBLib editors providing silkscreen clipping, automated movement of silkscreen text and automated clipping or movement of fills/regions.
52336	Improved interactive routing performance in the presence of complex layer stack regions.
52425	When exporting to AutoCAD, internal system layer names were being used and not the layer names defined through the Layer Stack Manager. (BC:18335)
52426	Clearances between polygon and track primitives were correct on the PCB, but incorrect in the generated Gerbers.
52490	In some cases, the error "E3DError: DXGI_ERROR_DEVICE_REMOVED" would be encountered. (BC:19905)
52499	An exception would occur when placing full stack vias in a PCB library, then switching to the Layer Stack Manager.
52503	In arc modes, the Interactive Differential Pair router would create unevenly spaced differential pairs if, in the rules, clearance > diff pair gap. (BC:19180)
52507	With the Component re-route option enabled, moving a component with attached primitives on the multi-layer would result in an Access Violation.
52561	For a specific design, removing unused pad/via templates from the Local Pad & Via Library would lead to a catastrophic failure.
52581	Component links were being broken at design import after having previously added a new variant or changed alternate part parameters using the new Variant Manager.
52646	A PCB panel document involving a high number of boards was taking around 15 minutes to open, compared to 30-40s in older versions of the software.
52672	ODB++ output for a panelized board was generating a separate folder for each stepped PCB instead of a single folder for all stepped PCBs.
52725	For specific designs, closing an open PCB document when the new Variant Manager was also open would result in an exception being encountered.
52727	The Collaborate, Compare and Merge panel has been removed from Public use. For the time being it is only available to Beta users as part of the set of Closed Beta features.
52802	The Net Information region of the Properties panel now has expandable sections to show all relevant class information. (BC:19422)
52850	For a specific design, moving a union of components and then attempting to Undo the action would result in Altium Designer closing unexpectedly. (BC:19714)
52944	When using the .VersionControl_RevNumber special string, the suffix "[no modification]" was being added for non-modified files. (BC:19797)
53065	For specific components, no Parasolid parts (*.x_t) were being created (from STEP models in the PCB design) when transferring the design from ECAD to MCAD.
53130	Generating ODB++ output from an embedded board array would result in wrongly named and missing layers. (BC:19887)

Multi-board

52438	For a Module Entry using a Workspace Library component, the Properties panel now reflects the lifecycle and revision state, with the ability to quickly update to the latest revision.
52439	Single pin nets wired to a connector with a defined Net Label (in the child PCB project) would be named 'No Net' in the multi-board Schematic.

Harness Design

53252

Added support for Harness Design through the creation of a Harness Project (*.PrjHar), which can be standalone or part of a multi-board project. (BC:9920)

Platform

50633	Support added for enhanced handling of projects with missing documents instead of automatic removal and flagging the project as 'modified' when opened. (BC:1243)
50964	In some cases, the error "EInvalidAccessToObject: Object accessed after being destroyed" would be encountered.
52125	Project is no longer modified if the stored printer for it is not available on a PC. Instead, that PC's default printer will be used, but can be explicitly changed thereafter.
52374	In some cases, the error "System.Net.Http.HttpRequestException: Response status code does not indicate success: 401 (Unauthorized)" would be encountered.
52694	In some cases an EAccessViolation (at address 000000016EC7C132 in module "ADVPCB.DLL") would be encountered.

Data Management

47275	The control to open the Manufacturer Part Search panel from the Replace <Component> dialog (when choosing an alternate part for a variant) has been removed. (BC:17266)
47488	When acquiring a component from the Manufacturer Part Search panel into the Workspace, all datasheets were being added instead of just those selected in the Use Component Data dialog.
51416	With a Workspace project opened in two instances of Altium Designer, one instance (if closed and then opened) would need a manual refresh to see any changes made/saved in the other instance.
51560	Enhanced detection and resolution of duplicate project files, without the need to use an external VCS tool.
51638	Added the ability to export the project history into a PDF through an Output Job.
51837	Enhanced support added for admins to remove design repositories from Workspace (with validation). Also added auto-removal of repository after successful migration of external VCS project.
52297	It was not possible to add a Manufacturer Link to the ActiveBOM when the manual solution was from a custom part provider (synced to the Workspace using PrtSync).
52339	Added a warning dialog when attempting to rename the project file (or a source document) and that file is in the 'Out of date' or 'Conflict' state.
52349	Support added for layer-specific comments on the PCB (in 2D). Focusing a comment will auto-switch to the same view the reviewer had (visible layers, active layer, top/bottom view).
52351	A System.FormatException error would occur if attempting to set a non-numeric value for the Quantity field in a custom row of an ActiveBOM.
52366	The Project Releaser Item Naming Template settings are now stored in the project file, instead of the local Windows registry.
52451	The mention feature with comments does not pop a suggestion list when using the @ symbol and the local language keyboard is used (not EN).
52474	There were problems encountered with automatic task assignment when using the commenting feature.
52555	In some cases when working with comments, the error "System.InvalidCastException" would be encountered.
52587	In some cases, an EAccessViolation in module "EDMSInterface.dll" would be encountered.
52615	When adding an alternative item to the BOM, the Add Alternative Item dialog now remembers your used filters and values, just as the Components panel does.
52616	When removing an alternative group a confirmation dialog will now appear, alerting you that doing so will remove any alternate components assigned to that group from the BOM also.
52656	The active VCS status pop-up window was not displayed correctly if the Projects panel was docked in a position other than on the left. (BC:19688)
52676	For a specific project in an external SVN repository, the Open/Compare right-click commands in the Storage Manager panel would not function correctly. (BC:17509)
52984	In some cases, switching between Pro and Standard Workspaces would result in the Pro Workspace losing features/functionality.
52986	In some cases, it was not possible to add new components or edit existing components in a Workspace Library. (BC:19813)

Import/Export

49342	When importing a specific Mentor Expedition® design, holes/cutouts in copper were not being converted correctly.
51388	In some cases, the EStringListError "String list does not allow duplicates" would be encountered when importing a PADS design using the Import Wizard.
51790	In some cases, an Access Violation in module "LoadPADS.IWZ" would be encountered when importing a PADS design using the Import Wizard.

Simulation

51212	The text "Output Expression" had a typo in the DC Sweep and Transient areas of the Simulation Dashboard.
52279	Running an AC Sweep Analysis with an Output Expression of MAG(v(resistance))) would result in an incorrect value for the AC Voltage.
52310	In some cases, the EOleException "Index was outside the bounds of the array" would be encountered when performing the verification stage.
52371	The model description for the following components was incorrect - CCSW_Hysteresis, CCSW_Smooth_Trans, Switching Capacitor, Photodiode.
52378	Added support for additional PSpice digital model primitives including flip-flops, latches, Pullup, Pulldown, Delay Line and behavioral primitive LOGICEXP.
52379	The performance of the SimData editor has been enhanced with various optimizations, memory buffering and removal of redundant calls.
52398	Added PSpice standard gate components (AND, OR, XOR, NAND, NOR, NXOR, BUF and INV) to the Simulation Generic Components library.
52399	Added PSpice tristate gate components (AND3, OR3, XOR3, NAND3, NOR3, NXOR3, BUF3 and INV3) to the Simulation Generic Components library.
52400	Added the PSpice Digital Generator component to the Simulation Generic Components library.
52403	Ability to view the high-impedance state for digital waveforms in the SimData editor.
52477	There was a typo in the simulation error message "Operating Point Analysis: Failed to Calulate the Operating Point".
52724	For the STIM component, the incorrect starting value was being used for d(pre) in a transient analysis ('0' instead of '1').
52754	When running the verification stage, an error with model syntax was not presented in the Sim Model dialog, while an empty error message was presented in the Messages panel.
52828	The .IC and .NS components from the Simulation Generic Components library were not being added to the generated netlist.

Version 22.11.1

Build: 43 Date: 15 November 2022

Schematic

49397	When viewing Document Options in the Properties panel, the list of available templates was not alphabetically ordered. (BC:17798)
50695	The text for all selected text objects would become the same when the Text section was focused in the Properties panel. (BC:18717)

PCB

38453	Cross-probing from a Length or Matched Net Length violation entry, in a DRC report or the Messages panel, would not navigate to the correct location on the PCB.
45291	The new unified Gerber setup dialog, whose options change in accordance with the type of Gerber output being generated (Gerber X2 or Gerber RS-274X), is now fully public (and ON by default).
46207	All copper objects, with and without a net assigned, are now checked by the Un-Routed Net design rule.
46860	For Gerber data generated from a panelized PCB, the layer ordering in the CAMtastic panel did not match the layer ordering defined by the PCB's layer stack.
47431	When generating outputs, if the footprint of a specific component was changed, all other footprints of the same name were modified also. (BC:11318)
48218	Placing from a PCBLIB did not follow the physical order of the layers, resulting in primitives being placed on the wrong layers on the PCB document.
50892	DRC was incorrectly reporting rule violations due to rounding errors. (BC:6538)
51003	For a via placed from a Pad Via library, updating from the library after making changes to the PCB Layer Stack would result in the via stack becoming incorrect.
51209	The Embedded Board Array was not taking the layer order from the PCB Layer Stack, leading to incorrect NC Drill output.
51278	Added support for custom pad shapes with rounded/chamfered corners.
51647	The layers of placed embedded board arrays were not being drawn in accordance with the physical order of layers of the main board.
51685	Added support for importing a 3D model in SOLIDWORKS Parts File (*.SldPrt) format created from SOLIDWORKS 2022 and 2023.
51749	Incorrect coloring for generated STEP models in PCB/PCBLib when advanced option PCB.OpenCascadeLatestVersion enabled. (BC:19221)
51801	Flipping a component in a layer pair whose .Designator string has been resized, causes a hidden layer to be made visible.
51836	With new Variant Manager it wasn't possible to add a second parameter after a first. In addition, when cloning a variant its parameters were not cloned. (BC:19624)
52022	A null reference exception error could occur after saving and re-selection part of a graphical primitive (e.g., Rectangle).
52027	Added ability to generate additional drill tools (when generating NC Drill and ODB++ output) based on the Drill Symbol groupings defined for a PCB’s Drill Table. (BC:17877)
52038	Incorrect clearance checking between back drilled holes and other electrical objects.
52153	When running Update from PCB Libraries, the comparator was not detecting changes made to 3D Body height or changes made on the Paste Mask layer. (BC:9423)
52154	Octagonal-shaped pads were not being correctly drawn in generated Gerber output. (BC:4987)
52187	Changes made to layers in the new Print dialog (UI.Unification.PrintPreviewDialog option enabled) were not being saved.
52289	In some cases an "Invalid floating point operation" error was being encountered.
52337	An exception occurred when a footprint was not set for a component.
52538	A crash occurred after a via was deleted from the Pad Via Library and the library was saved.

Multi-board

52110

Incorrect error message was presented when opening/updating a multi-board project on another user's PC, if a child PCB was not shared with them.

Draftsman

52729

A crash occurred after reopening Altium Designer if a Draftsman document was open when the software was previously closed.

Platform

51935	An exception occasionally occurred when clicking on a control in the CST PDN Analyzer or Power Analyzer by KeySight UI.
52081	An invalid operation exception would occasionally occur when a thread failed to release an object required by another thread.
52082	An invalid operation exception could occasionally occur when a thread failed to release an object required by another thread.
52123	Japanese localization file updated for various menu commands, including the 'Reuse Block' command entry on the schematic Place menu.

Data Management

49955	An access violation occasionally occurred during editing in the Explorer or Components panel or the Single Component Editor
51632	When collaborating on a shared Workspace project, changes to a Draftsman document saved by one user were not being seen by another after updating the project.
51812	While collaborating on a specific, large Workspace project, the software would freeze for one user whenever another user made a commit. (BC:19261)
52140	An exception would occasionally occur when running a VCS command.
52175	Special strings have been added to Schematic, PCB and Draftsman to display the VCS (Git-only) commit ID in short hash format (first 8 characters). (BC:10286)
52243	An exception could sometimes occur after clicking on the Library Health icon in the Explorer panel.
52502	Saving a component whose footprint contains special characters gave the fatal error 'Footprint name contains prohibited symbols for the operating system'.
52640	An exception was being encountered after setting the value for the Line# field for any component in the ActiveBOM.

Simulation

46090	Model descriptions for DC Motor and PID Controller components updated, along with fixes to ZENER, NGSPICE_DIODE, PSPICE_DIODE, Schottky_diode and Varactor models.
46475	When running a simulation for a project with multiple schematics, data was only being presented for probes placed on the first schematic.
51937	Added support for PSpice digital tristate gates and their associated timing models, I/O models and advanced simulation options.
51952	Support has been added for zero time delays in all digital components.
51971	Support has been added for Variants. Simulation is performed for the active variant. (BC:3957)
51976	The Triangle Wave signal was not correctly presented in simulation results (in comparison to its signal preview).
52131	The PSpice STIM component now supports the hi-impedance state.
52311	An error would occasionally occur during circuit simulation.

Version 22.10.1

Build: 41 Date: 13 October 2022

Schematic

51340

In a Text Frame/Note, if a character is added next to a designator/net link without a space, the presentation is corrupted in the Properties panel. (BC:19064)

PCB

46601	A count for 'Unrouted/Hidden' nets has been added to the Properties panel as part of the wider information available to you for the active PCB.
47655	Altium Designer would freeze when performing Interactive Routing on a specific PCB. (BC:17221)
47848	For a generated Assembly Drawing, the display graphics for Not Fitted components in a variant were being drawn beneath other layers. (BC:14994)
49108	DRC was failing to detect Minimum Annular Ring violations for vias and pads with connections on layers where annular rings are absent. (BC:6036)
49448	Changing the footprint for multiple selected components would display the error window 'Cannot match pads with new footprint' for each component. (BC:7553)
50109	Correct clearances were not being observed when repouring a solid polygon and the clearance rule contained 'WithinRoom' or 'TouchesRoom' keywords. (BC:17188)
50717	An Access Violation was intermittently being encountered upon manually saving the PCB document locally. (BC:19466)
51015	When a Reuse Block was placed, the scale was reduced and the software jumped to the location of the original snippet. (BC:15423)
51633	Violations were occurring when glossing selected traces in the 'Rounded' Hugging Style mode.
51781	For specific boards, when exporting to STEP and PARASOLID the geometry was broken in generated files. (BC:19227)
51831	The SMD Neck-Down design rule was not functioning correctly with the PCB.EngineX option enabled.

Multi-board

51200

PCB child projects are now checked out to the same root folder as the MB project. Projects panel UI now enhanced to respect permissions set for both MB and PCB projects.

Draftsman

49805

Incorrect scaling of a Board Realistic View when generating PDF output through the Project Releaser. (BC:16894)

Platform

51154

Approximately 12% CPU usage when the software was running, yet idle for a lengthy period.

Data Management

49570	Improved UI for the Manufacturer Part Search panel, making it more intuitive to work with searched components and to populate your own Workspace Library.
51402	In some specific cases, an Access Violation would be encountered from within the TaskList panel.
51635	Added support for Custom Part Sources when specifying preferred suppliers at the project level to be used by ActiveBOM, when processing supply solutions.
51684	When cloning a specific project commit, only the last commit was being used for the cloning process.
51867	In some cases, and with larger projects, adding an alternative part for a BOM item (in ActiveBOM) would cause Altium Designer to terminate.

Import/Export

47734	A defined board cutout was missing after importing a specific CADSTAR design file.
51146	For a specific Allegro design file, import would result in all component pads losing their net assignments. (BC:18933)
51815	An exception was encountered when trying to import a KiCad version 6.04 schematic file that had an associated template defined.
51834	In some cases an error ("Value cannot be null. Parameter name: key") would be encountered when importing a Zuken CR-5000 design.

Simulation

46043	Output voltage, power and current in AC analysis for a capacitor model are now supported.
46048	Output voltage, power and current in AC analysis for an inductor model are now supported.
51087	Default settings are now provided and used when ADC/DAC components are automatically inserted by the simulation engine to process interconnections.
51238	The current label for the emitter of a bipolar transistor was incorrectly displaying the substrate current.
51600	PSpice UGATE models for digital components are now supported.
51602	PSpice AND and ANDA digital components are now supported.
51603	PSpice AO and AOI digital components are now supported.
51604	PSpice BUF and BUFA digital components are now supported.
51605	PSpice INV and INVA digital components are now supported.
51606	PSpice NAND and NANDA digital components are now supported.
51607	PSpice NOR and NORA digital components are now supported.
51608	PSpice NXOR and NXORA digital components are now supported.
51609	PSpice OA and OAI digital components are now supported.
51610	PSpice OR and ORA digital components are now supported.
51611	PSpice XOR and XORA digital components are now supported.

Power Analyzer

50182	Configuration settings were not updating based on chosen Copper Type and fields were not editable upon choosing 'Custom'.
50218	Specified load current values were not being processed correctly.
51810	It is no longer a restriction that a source component must be connected to the selected power and ground nets at the same time.
51813	In some case the Heatmap was not being presented for a layer in which violations were detected and polygons had been placed.
51826	An error was encountered when trying to save the modified properties for a component in an extended net.
51828	In some cases, the Voltage Drop for a power net was being interpreted incorrectly as an error.
51829	The Use Logarithmic Scale option is now disabled by default, ensuring a linear scale is used for the Heatmap.
52079	After running an analysis and closing/reopening the .pdnaX document, previously detected violations were no longer presented in the PDN Analyzer panel.
52092	In the Configuration settings, 'Hole Size 1' and 'Hole Size 2' have been renamed to 'Minimum Via Diameter' and 'Maximum Via Diameter' respectively.
52168	The caption for the command to launch the analyzer has been changed from 'Power Analyzer' to 'Power Analyzer by Keysight'.
52236	After opening an older .pdna file, an error would be encountered the first time the 'Show on PCB' button was pressed.

Version 22.9.1

Build: 49 Date: 14 September 2022

Schematic

50195	For a selected component, the SPN drop-down control for a Part Choice was not being presented in the Properties panel. (BC:17033)
50644	Copying a Text Frame containing a large number of characters would result in a generic GDI+ error.
50888	Occurrences of the @ character in component Unique IDs - which would cause issues - are now automatically detected and fixed.
51291	Multiple spaces used for formatting in a Note/Text Frame would be reduced to a single space when focusing the Text field in the Properties panel.

PCB

49617	When changing the Thermal Relief value for a via, the associated polygon was not being automatically repoured.
50107	Polygons with auto-generated names were being removed from their Polygon Class after a shelve/unshelve cycle. (BC:17846)
50868	On some boards an Access Violation would be encountered while performing interactive differential pair routing.
51124	In some cases, opening an earlier version PCB would result in the Layer Stack Manager's Stack Symmetry option becoming disabled and defined mirroring vias lost.
51152	A new 'Text Frame' entry has been added to the Place menu and ActiveBar for placement of multi-line text in the PCB and PCBLIB editors.
51223	With the PCB.EngineX.RuleSystem advanced option enabled, online error markers for violation of a Clearance rule (Same Net Only) could not be cleared. (BC:19006)

Multi-board

49771	It was impossible to work with a PCB in both Schematic and Assembly documents, if that PCB had been added by another user on another computer.
50445	For a project created on one PC and shared with another user on a second PC, when that user added/removed a PCB, the change was not reflected back on the first PC.
50941	In some cases an exception would occur in a Multi-board Schematic, when modifying connections in a cable and scrolling the list of connections first.

Draftsman

49424	The height of a cell in a placed table would automatically increase when more than 19 characters are entered into it. (BC:18134)
49655	For a specific case, import of changes from the PCB would lead to a crash with error 'External component has thrown an exception'. (BC:18292)

Platform

51267	In some cases Altium Designer would freeze when saving a PCB document and the YoudaoDict application was also running.
51276	In some cases an EOleException error ("OLE error B0DFD628") would be encountered when using certain settings with Windows Exploit Protection.
51356	Manually installed extensions were not being updated automatically when updating the platform itself.

Data Management

50827	Placement of comments within the main design space has been made much smoother, now comparable to placement through Altium 365's Web Viewer.
50917	Filtering for the Comments and Tasks panel has been enhanced in this release with the ability to present only Tasks, and to filter by assignees.
50923	When releasing a design, generated outputs using the ItemRevision in their file names would cause the Project Releaser to block the release.
51132	Sometimes it was not possible to delete a large number of components (200+) from the Explorer or Components panels.
51169	An error would occur when exporting comments containing an empty comment thread.
51184	Not all preferences were being applied to the Data Management - Parts Providers page when loading a preferences file (*.DXPPrf).
51263	Multiple Part Choices for a component, sourced from a custom part source, were not being presented in the Components panel when they had the same 'InternalID'.
51284	Incorrect Part Choices were being presented when multiple custom part sources were configured for use.

Import/Export

48383

When exporting a PCB to STEP, the export included layers that were disabled and incorrect thicknesses in areas with a stiffener. (BC:16245)

Simulation

50878	In some cases a "System.NullReferenceException" error was being encountered when editing model parameters.
51243	An error occurred when a comma (",") was used between "POLY" and the control voltage source name.

Version 22.8.2

Build: 66 Date: 26 August 2022

Schematic

47751	When viewing a design variant, you now have the ability to select multiple components and mark them as fitted/not fitted in a single action. (BC:10769)
51206	A generated PDF of Schematic Prints was not displaying values of varied parameters when a single variant was chosen for the whole OutJob. (BC:19011)
51310	Graphics were not being correctly updated when dragging selected circuitry in the main design space. (BC:19057)

PCB

26221	When using the Measure Distance feature, text was not being correctly scaled when zooming in and out. (BC:12122)
45973	The graphics engine was not displaying self-intersecting regions correctly. What was shown in the PCB editor could differ to the Gerber/ODB++ output. (BC:18461)
46600	Pasted net objects, including polygons, are now assigned a net name based on the priority of the object(s) that they touch when pasted (priority: pad, fill, region, track, arc, via, polygon). Enable the PCB.CopyPaste.NetsPriority advanced option. (BC:15476, BC:17296)
49661	When a polygon was repoured, hairlines were generated that caused acute angle violations in error. (BC:17116)
50108	When using the Jump Location feature (J,L), Altium Designer now accepts "," as a decimal delimiter. (BC:17614)
50344	For a specific case, an AV would occur when using a custom query in a Silk To Solder Mask Clearance rule. (BC:18649)
50489	A number of improvements have been made to the Collaborate, Compare and Merge panel to restore it to working order again.
50493	The color contrast used to highlight changed/unchanged cells in the merge resolution view was too subtle when using the Collaborate, Compare and Merge feature. (BC:12438)
50494	The change type overlay (Mine+, Head-, etc) was not being shown in the design space when using the Collaborate, Compare and Merge feature.
50495	Work regions were not being displayed in the main design space when using the Collaborate, Compare and Merge feature. (BC:14363)
50498	There were no 'dash contours' around primitives in the main design space, when using the Collaborate, Compare and Merge feature.
50499	Cell names were absent in the main design space when using the Collaborate, Compare and Merge feature.
50516	The Collaborate, Compare and Merge panel was not pushing changes to the connected Workspace when using the 'Commit this document to version control' command.
50517	A moved component was being reported in the wrong cell when using the Collaborate, Compare and Merge feature.
50518	Live collaboration with the Collaborate, Compare and Merge panel was not working with a connected Altium 365 Workspace.
50519	Revision names in the Collaborate, Compare and Merge panel were unreadable when using a Git-based project in NEXUS (with a connected NEXUS Server Workspace).
50520	Live collaboration of a Git-based project using the Collaborate, Compare and Merge feature would result in Git errors when automatically generating work regions.
50521	The Collaborate, Compare and Merge panel was only ever displaying the first revision of the checked out PCB document.
50524	When using the Collaborate, Compare and Merge feature, auto-generation of work regions exhibited very slow performance.
50545	Collaborate, Compare and Merge panel was showing an incorrect message when connected to an Altium 365 Workspace without the required license feature.
50638	Duplicate Keep-out Layers were created in error in the Print dialog. (BC:18758)
50652	Automatic loop removal issues, including cases of not removing obvious loops and where routing, on top of existing tracks with different width, was discarded.
50705	Mirrored vias were being incorrectly detected in the PCB Health Check as vias without an assigned drill span.
50794	The Properties panel for a selected Text object now supports 'String' and 'Frame' modes, for switching between single- and multi-line text. (BC:17111)
50867	Counterholes on the bottom side were incorrectly labeled as 'Counterholes Top' in generated drill files (*.DRR). (BC:18802)
50919	There was a noticeable slowdown in performance when navigating parts in the PCB Library panel.
50944	Making changes to rule constraints in the Constraints Editor (Document View) would result in violations not being correctly reported by DRC.

Multi-board

50413

Added support for alphanumeric column sorting to the Connection Manager in a Multi-board Schematic document.

Platform

49173	Altium Designer would occasionally freeze when interacting with Altium 365.
50604	There were various cases of the following exception being encountered: "System.ServiceModel.FaultException - Access denied! User login required for this service".

Data Management

50366	Improved message clarity and behavior when a managed project is stored within the folder structure of another version control repository. (BC:18625)
50536	The contextual comment/task window now appears at the top-right of the design space when an entry is clicked on the Comments and Tasks panel.
50777	Added support for Output Job templates to the Data Management - Templates page of the Preferences dialog. (BC:18765)
50797	Changes to pin names were not reflected in the Pins panel after updating a symbol to its latest revision (for a Workspace Library component). (BC:18811)
50806	The software would hang when hovering the cursor over a document's VCS status entry in the Projects panel. (BC:18645)
50813	Multiple issues occurred when using alternate components in the ActiveBOM.

Import/Export

47251

For a specific EAGLE design, the layer stack was being imported incorrectly.

Simulation

50769	Digital models have been added to the Simulation Generic Components library.
50770	The descriptions for various models in the Simulation Generic Components library contained typographical errors. (BC:18754)
50877	The numeric values for global parameters are now presented on the Global Parameters Tab of the Advanced Analysis Settings dialog.
51007	Messages relating to the model auto-assignment process are now presented in the Messages panel.
51008	A progress bar has been added to show model auto-assignment progress.

Version 22.7.1

Build: 60 Date: 19 July 2022

Schematic

44042	A specific project was experiencing slow performance when moving net labels on its source schematics.
48090	Improved performance when copying and pasting a component using the Shift+Click&Drag feature.

PCB

49057	You can now change the layer for a length tuning object through the Properties panel, using the new Layer property. (BC:6977)
50197	Export of a folded rigid-flex board to Parasolid would hang/crash if the slot hole of a pad resided completely within the bend region.
50279	An error would occur when copying a PCB Library component that included a counterhole pad.
50358	In Gerber and 3D views, countersink pads were not connecting to internal planes with the same net, when the Power Plane Connect Style was set to Direct.

Draftsman

50431

Incorrect drawing order meant that Annotation objects were being overlapped by any other placed view. (BC:12369)

Platform

50122	The list of documents in a grouped tab of the Documents Bar is now sorted alphabetically. (BC:17490)
50501	The software was being closed by Windows when dragging and dropping documents between application window instances.
50515	Adjusted the use of colloquial/old English text on the Extensions & Updates page of the UI. (BC:18734)

Data Management

47387	When using the mention feature in a comment, the pop-up list was only using email for its search. It now populates with suggestions based on username and email.
49857	Enhanced PDF report of the comments in a design, including Task-related details and active links to Altium 365's Web Viewer interface.
49864	Added support for switching a repository from using SSH connection protocol to HTTPS (if supported by that repository), when making a project available online. (BC:16009)
50549	The active Project Group (*.DsnWrk) document was not being saved when exiting the software. (BC:18812)
50556	A crash would occur when trying to open a project, created through the Altium 365 Platform Interface, from the Explorer panel for the first time.
50650	'Git repository not found' error would sometimes appear, with respect to an external project document that had been added to a Workspace project.
50767	The repository structure validation has been disabled for the time being to not block project commits. (BC:18625)
50934	Placement of components from a Workspace Library was not possible if the time format on the PC included '.' (hh.mm.ss) instead of ':' (hh:mm:ss).

Version 22.6.1

Build: 34 Date: 16 June 2022

Schematic

49754

Find and Replace string substitution would cause an exception error when attempting to perform a partial string replacement. (BC:18053)

PCB

47715	Solder Mask openings for pads were not being displayed when viewing a mirrored embedded board in 3D.
49544	Clearance Boundaries would be displayed when trying to route track in a Keepout area whose Track and Copper restrictions had been disabled. (BC:8439)
49632	Pad Via libraries always opened with Imperial Display Units, regardless of the units chosen when the library was saved.
49633	When a new Pad template was added to a Pad Via Library, the Via Template Editor would incorrectly open instead of the Pad Template Editor.
49634	Pad Templates in the Properties panel were listed in the order they were added; they are now listed alphabetically.
49758	Additional checks have been added to the PCB Health Check Monitor to detect 'Unused xSignals' and 'Unused From-Tos'.
49887	For a specific PCB, an AV (Invalid GUID string) would occur when opening the Rules Editor and the board had been saved with the Rules displayed in Document View.
49963	AV occurred during Un-Routed Net DRC when a TH pad (hole size 0) was defined to only appear on a single layer, and was connected to a same net poly on that layer.
49999	When generating Gerbers for a specific PCB using the *.gbr file output format, mid layers and mechanical layers were empty. (BC:18483)
50080	The real (physical) height of a sub-stack was not being presented in the 3D view of the board.
50124	When adding one or more mechanical layers to the 'Other Layers' group, in the new Gerber Setup dialog, addition would only be to the first layer in the group.

Draftsman

45933

A Board Fabrication view of a panelized PCB was only displaying polygons on one board in the embedded array, instead of all boards.

Platform

31836	Specific STEP models would cause Altium Designer to crash when those components were on a board being loaded into a Multi-board Assembly. (BC:15232)
49954	It was possible to use the Clone and Open Project As Copy controls, in the Open Project dialog, when using a Viewer license of Altium Designer.
50070	The Storage Manager was not displaying Git merge commits, these are included now.
50355	The ‘Workspace Library is empty’ message was shown in the Components panel after refreshing if a search keyword is entered.
50402	The Edit command was not accessible in the Components panel when not connected to an Altium 365 Workspace.

Data Management

48359	Renaming and committing a file on one PC when already open on a second, would result in the document being removed from the project when committed from the latter.
49007	It was not possible to place a Comment on a managed schematic sheet in Altium Designer. (BC:17869)
49607	Changing the case of letter(s) in a version-controlled document name would give a VCS 'File already exists' error. (BC:18081)
49618	Comparison of local documents and a project commit or release has been implemented.
49716	When connecting to a specific Workspace with certain time and date settings, Altium Designer would display an Error dialog stating that the local time was invalid.
49849	A new warning is presented when attempting to save a managed project to the active Workspace and duplicate project files are present in the design repository.
49850	General tasks are now listed in a separate group in the Comments and Tasks panel.
49892	When releasing a specific project using the Project Releaser, managed OutJob files would get unusual characters added to the beginning of a file name. (BC:18386)
49928	When placing from the Components panel some users would see a 'Store update, insert, or delete statement affected an unexpected number of rows (0)' error message.

Import/Export

46928

If the Windows decimal separator was set to the comma character, design constraints were not being imported during import of a Mentor Xpedition file.

Simulation

50053	Added the ability to present the Y-axis in Logarithmic form for simulation results in the Sim Data Editor, in the same way previously only possible for the X-axis.
50074	A set of seven quick-start simulation examples has been added to the \Users\Public\Documents\Altium\<InstallationFolder>\Examples\Simulation Quick Start folder.

Other

49788

The following exception was being encountered: "EOleException. Object reference not set to an instance of an object in Altium.Edp.ComponentSearch.Plugin.dll."

Version 22.5.1

Build: 42 Date: 19 May 2022

Schematic

49008	Switching to another application while in-line editing in a schematic text frame could result in the edits being lost and the message "Interactive process not finished" appearing. (BC:17965)
49420	The Find Text dialog now includes a Mask Matching option, when enabled everything in the workspace is masked except the found results. The Mask level (Dimming) and Zooming behavior are configured in the Highlight Methods options in the System - Navigation page of the Preferences dialog. (BC:3857)
49527	Formulas within text on a schematic were not being resolved correctly when the PC was set to use French regional settings for Windows.
49822	The Schematic.EnableCustomDiffPairNaming feature has been moved to Open Beta.

PCB

45204	Stacked THPs and vias generated duplicate drill hits in the Drill Table.
47196	The PCB List panel was displaying an incorrect value for the "Remove Islands Less Than" polygon threshold value when the units were set to mils. (BC:16973)
47379	In a rigid-flex design, if the flex zone has a Coverlay layer with a layer type of Solder Mask, the actual Solder Mask layer is always displayed in the 2D view even when its visibility is disabled in the View Configuration panel.
48786	Double-clicking on stacked PCB objects in 3D view mode with the 'Display Popup Selection dialog' option enabled and the 'Double Click Runs Interactive Properties' option disabled, would sometimes result in the software being locked in 3D view mode and not being able to save the board.
48994	The embedded board array object now includes a Board Shape option in the Properties panel; use this to switch the PCB background from green to transparent. (BC:17814)
49220	Exported ODB++ data was still incorrectly showing back drilled vias as being plated when using millimeters as the default units. (BC:13553)
49358	Millimeters are now the default units when generating output from the PCB such as Gerber, Gerber X2, ODB++ and NC Drill. (BC:15848)
49425	When pasting a via over a pad and some polygons, the selection pop-up would appear, even though there was no ambiguity as to which net (that of the pad) the via should 'pick up'.
49462	In some cases, self-intersecting regions were created when adding teardrops to a PCB.
49463	Self-intersecting regions were being exported to ODB++.
49499	When the PCB.IPC4761Support advanced option is enabled, and there is a certain combination of columns enabled in the Drill Table defaults, and the Drill Table defaults are edited to include certain additional columns, those columns could become repeated in the table.
49520	A pad with the Counterhole option enabled could result in that pad disconnecting from inner layer polygons when the Counterhole size approached the pad size.
49559	The gray-scale color palette used for generating PCB Prints did not offer the correct coloring choices. (BC:18209)
49574	On Windows 7 the PCB Heads-Up display was not correctly updating the location coordinates as the cursor was moved. (BC:18149)
49629	The feature to 'Prevent modification of PCB Component Primitives' is no longer controlled by an option in the Advanced Settings dialog. Instead, an option for it - Protect Locked Primitives in Component - has been added to the PCB Editor - General page of the Preferences dialog and is disabled by default. (BC:18281)
49639	The BoardOutlineClearance rule did not display the edge types for a rigid-flex board. (BC:18296)
49664	It was not possible to select any components on a particular PCB document due to a regression involving ordinate dimensions that included several points of measurement.
49681	If the Pad size was smaller than the Hole size, the Minimum Annular Ring violation was not flagged. (BC:6036)
49735	Drill layers enabled for plotting in the older Gerber/Gerber X2 setup dialogs (pre-Altium Designer 22.4) would all be disabled when using the new unified Gerber/Gerber X2 setup dialogs (available from Altium Designer 22.4 by enabling the UI.Unification.GerberDialog option in the Advanced Settings dialog).
49906	The settings for mechanical layers added to plots in the old Gerber Setup dialog were not retained when those Gerber settings were opened in the new Gerber Setup dialog.
49922	There was a mismatch in Gerber extensions vs actual layer ordering when generating Gerber/Gerber X2 output using the new unified Gerber/Gerber X2 dialogs (enabled by the UI.Unification.GerberDialog option in the Advanced Settings dialog) and with the output format set to 'filename.* (gtl, gbl, gto,...)'. (BC:18411)

Draftsman

45950	Draftsman now supports copy/paste of Annotation objects between Draftsman documents or from a template to a document. Note that you can only copy an Annotation object when it is not attached to another Draftsman object, such as a View. ( BC:16782)
48253	Copying and pasting a table that includes merged cells would result in the merged cells becoming un-merged in the pasted table. (BC:11561)

Platform

45944

VCS analytics and logging has been improved, providing improved error status and logging data.

Data Management

49435	If a Malformed URL GIT error occurred, the error dialog would display the user's password and the Workspace URL. (BC:18032)
49519	The Filter feature in the Components panel (and the MPS panel) was incorrectly displaying the temperature value options in degrees Fahrenheit instead of Celcius.

Import/Export

46882	An exception would occur when importing a specific PADS PCB file.
47927	The Allegro importer would sometimes incorrectly create a region object in the same shape and location as a polygon.
47928	The Allegro importer was incorrectly creating a polygon cutout over unconnected pads within a polygon, making it impossible to control the polygon clearance using design rules.

Simulation

49521	There was an issue with multi-part components where, for floating nodes, a ? was entered into the simulation netlist instead of a new net.
49645	It was not possible to stop a running sweep-type simulation at any stage in the sweep. instead, the simulation would stop only after completing the full number of swept outputs.
49692	The performance has been increased when plotting histograms and parametric plots by a factor of 10.

Version 22.4.2

Build: 48 Date: 13 April 2022

Schematic

47754	The properties of an alternate (varied) part are now displayed (as read-only) in the Properties panel when that alternate part is selected on the schematic. (BC:9295)
48909	Toggling the visibility of pin parameters would reset their location to default. (BC:15630)
49033	Component Pins tab of the Properties panel would not sort by Name, only by Pin number. (BC:17409)
49037	It was not possible to configure the default visibility of Sheet Entry cross-references to not visible.
49456	A crash occurred when using the Undo and Redo commands. (BC:18157)

PCB

47088	Dragging the center handle on a polygon edge would not always remove that edge when it was redundant.
47241	Delays on start/finish of diff pair routing when working with a PCB stored in OneDrive have been resolved.
48666	Attempting to move a component with the mouse that was failing the component clearance rule would not show an online rule violation, even though one existed. (BC:17728)
48995	Outline detection was sometimes failing when the shape included a combination of arcs and tracks.
49134	After dragging and dropping a 3D model from the Explorer panel onto a footprint open for editing, and then placing a pad, a warning that the component could not be saved because a command was already active would appear when attempting to save. This no longer occurs. (BC:17421)
49245	The PCB.ComponentSelection advanced option was not being applied, component selection was always using the contents of the Courtyard layer type.
49247	When the PCB.ComponentSelection advanced option was set to mode 2, only the contents of the Courtyard layer type were being used for selection, instead of Courtyard + 3D Body Objects + Silk + Copper layers.
49253	The Pin Swapping option for routing has been disabled by default and can be enabled during each new session of Altium Designer.
49494	A new option to 'Merge regions and pads inside Footprint' has been added to the Gerber Setup dialogs. With this option enabled, regions within a footprint will be merged with pads during generation of Gerber outputs.

Draftsman

46970	Certain custom scale values would display incorrectly.
47454	Certain primitives and views would be missing from a PDF generated from Draftsman, and the PDF would open with errors. (BC:17261)
47564	The size of the Board Realistic View changed after importing changes from the PCB.
48547	Draftsman now supports setting different symbol sizes for the Drill Table and the Drill Drawing (Drill Symbol Configurations dialog & Preferences dialog). (BC:16594)

Platform

49211

Help menu entries were not always taking the reader to the correct website.

Data Management

47849	Numerous improvements made to the Components panel, helping simplify the process of moving from file-based components to managed components.
48227	Numerous usability improvements made to the Library Migrator, including feedback about: conflicting parameters, model checking, empty folder paths, and other areas.
48748	Fixed a typo in the 'Part Choice Migration' dialog.
48838	The Library Migrator would not always indicate the reason a component failed to import. The validator has been improved to provide more details.
48877	Fixed typos in the 'Location of project files has changed' dialog. (BC:17788)
49050	Added the ability to access Workspace components when defining connectors in a multi-board.
49062	An error occurred when a project located in a server was refreshed. (BC:17813)
49078	The Connection Manager and the Properties panel did not display the same pin numbers in a multi-board project.
49195	Project Releaser would fail without providing details when generating output, if the design included an error such as components with mismatched sch/PCB pins.
49429	After editing multiple components in the Batch Component Editor, user-defined pin mapping definitions were deleted. (BC:18122)
49630	The Explorer panel was not presenting the aspect views (for browsing detailed data) for a selected item revision when using the panel's Search view.

Import/Export

49375

Corrected typo in the PADS Import Wizard. (BC:18089)

Simulation

46095	Support added to use a file-based PWL source. Set the Stimulus Type to File, then specify the path+filename in the Source's File parameter (eg C:\Designs\Circuit Simulation\Analog Amplifier\PWL_test.csv).
46193	Attempting to open the simulation model for a component placed from a DbLib would result in an access violation. (BC:15888)

Version 22.3.1

Build: 43 Date: 16 March 2022

Schematic

47692	When attempting to change multiple selected components via the Properties panel, if a different library is selected as the Source, the Component Source dialog appears. When the Select button is clicked the Replace dialog opens to choose the replacement, but instead of updating all currently selected components the Replace dialog would reappear for each of the selected components. (BC:11607)
47757	Updates (such as footprint and parameter changes) to components that were used as an alternate part in a Variant, were not propagating through to the design when an Update Schematics or Update Parameters command was run. (BC:7574)
48492	Improved the performance of dragging components on a schematic sheet that has a large number of components and wires.
48801	A new "Display Name of Special String" option added to the Schematic - Graphical Editing page of the Preferences dialog. When enabled, each special string has its name displayed as a faint superscript.
49034	Net name negation using the trailing backslash character was not working for Power Ports. (BC:4186)

PCB

46628	An access violation would sometimes occur during differential pair routing if the PCB file was stored in a OneDrive folder.
47327	The Heads Up Display would remain visible on top of all other applications after switching from Altium Designer to a different Windows application. (BC:9923)
47714	While attempting to place a linked 3D STEP model via the Place > Extruded 3D Body command, the model would automatically switch to the Embedded mode. (BC:13236). This ticket also corrected an issue where, if changes were made to a STEP model that was linked to a PCB, when that PCB was reopened and the linked model automatically updated, the model location and orientation were not correctly maintained, resulting in the linked model moving. (BC:7034)
47981	Performing a 3D measurement between a 3D object and the board surface or board edge, reported a distance of zero. (BC:17172)
48177	The Footprint Comparison Report would give a false failure on a component if: the component had been rotated, and the component included an extruded 3D Body object with an arc in its outline.
48189	Assembly Testpoint Style Component Body Clearance violations were not always being detected during online DRC, and were not reported after a batch DRC. (BC:14687)
48548	Differential pair reported signal length was not the same in the PCB panel and the tuning gauge during interactive length tuning, when the pair included vias.
48572	Improved usability for Top-Middle-Bottom and Full Stack editing in the Via mode of the Properties panel.
48840	Connected traces were unrouted when reroute failed after a component move.
49001	A trace would disappear when dragging a corner.
49149	Changing a via type (e.g. thru to blind, or blind to thru) could result in a broken net or a short circuit, which was not being detected as a design rule violation.
49196	For a specific design project an Access Violation would result when the Retrace Selected command was run on a partially selected accordion.

Platform

48876	On-site Workspaces (Concord Pro and NEXUS Server) did not display the Project History correctly.
48907	Switching between Workspaces or signing out of a Workspace would result in the software disconnecting from the Private License Server.

Data Management

48389	To reduce potential for confusion when using the Soft Locks feature, if a user has made changes to a document more than two days ago, a second user opening the same document will not see that the first user is 'editing' the document, but rather a clearer state of ' made changes locally on ' . In addition, the icon used in the Projects panel will change to gray, indicating that this is a change made more than two days ago and not an active editing session by that first user.
48778	User ranking of an existing Part Choice was not being saved.
48814	It was not possible to navigate through the different project Comment dialog options (such as the list of suggested email recipients), using the keyboard.
48836	A project that has a broken ProjectGUID did not result in the "Fix Version control link" dialog opening, as it should have.
48892	When there was a remote VCS repository connected to a local repository (which does not require authorization), the software would still prompt for authorization credentials when a VCS action was performed. (BC:17786)
48966	If a component included a ranked Part Choice, attempting to remove another Part Choice would remove that one and the Part Choice below it.
48967	With the 'Always Drag' option disabled, there were rare cases where some wires would disappear after moving a selection of circuitry. (BC:17756)

Simulation

45807	The 'μ' character is now supported as the SPICE suffix 'u' =1e-6.
48833	The speed of plotting simulation waveforms has been significantly improved.
48835	The speed of the simulation process has been significantly increased when running multiple analyses.

Version 22.2.1

Build: 43 Date: 14 February 2022

Schematic

36985	Extra connection dots were generated when moving wires on the schematic. (BC:10504)
45982	Embedded graphics in a schematic were not able to be presented in generated PDF output, causing an error in Acrobat Reader.
46454	With the 'Optimize Wires & Buses' option enabled (on the Schematic - General page of the Preferences dialog) some wire vertices would stay anchored when performing a second drag of a selection.
46723	Using formulas on a schematic involving the 'abs' and 'round' functions resulted in #NAME? being displayed, rather than the actual result of the functions.
47755	The variant that was last set prior to closing a project is now remembered, and will be the variant presented when the project is reopened. (BC:11089)
47758	The Project file (*.PrjPcb) was being marked as having been modified when making a change to the drawing style for a variant. (BC:7732)
48520	The opening time for a schematic that includes large multipart components has been greatly reduced, with an average 2.5x faster opening times based on test schematics.
48865	SQL syntax error encountered when trying to generate a BOM from an Output Job file.

PCB

43153	Creepage rule violations were not being detected where a primitive was fully surrounded by a polygon pour.
47827	An error occurred when trying to place a 3D body and use a specific Parasolid (*.x_t) 3D model.
48401	Altium Designer would close when a specific PCB was saved in ASCII format, then opened in Altium Designer.
48438	The router entered pads erratically when various SMT rules were in place.
48664	Exported ODB++ data was incorrectly showing back drilled vias as being plated. (BC:13553)
48665	Backdrill vias were incorrectly flagged as being plated in an exported IPC-D-356A Netlist test report.
48678	A new option 'Apply to Polygon Pour' has been added to the Creepage Distance design rule to ensure that a polygon pour obeys the rule when this option is enabled, in addition to the applicable Clearance rule. (BC:12510)
48702	An Access Violation would occur when selecting several PCB primitives, and a Drill Table, while the Properties panel was open. (BC:17831)
48900	'PCB Health Check in progress' was present in the Properties panel even after the feature was disabled.

Draftsman

41117	Added 'Remove Leading Zero' option on the Document Options mode of the Properties panel when in a Draftsman document. (BC:10785)
48198	After changing the number of holes on a PCB, and importing changes to Draftsman, the drill symbols were being reset in a placed Drill Table on the Draftsman document. (BC:17089)
48199	The ability to define default properties for a Drill Symbol has been added to the Draftsman - Defaults page of the Preferences dialog. (BC:11742)

Data Management

48599	The following exception was encountered when using comments - System.InvalidCastException: Unable to cast COM object of type "System.__ComObject" to interface type "RT_Workspace.IWorkspace".
48652	An exception would occur when placing a comment with multiple links - on a schematic or the PCB - and at least one of those links contains parameters.
48667	An option to 'Export Comments' has been added to the Comments panel (Comments and Tasks panel when on the Pro Subscription Plan).
48842	The 'Add to Version Control' command would disappear from the History & Version Control sub-menu, when accessing commands for a project through the Projects panel. (BC:17789, BC:17790)
48959	An error would occur when trying to copy a footprint from a local PCBLIB and paste it into the temporary PCB Library editor when creating a new footprint model item in a connected Workspace.

Import/Export

48437

The xDxDesigner Importer has been enhanced to allow users importing an xDxDesigner project to also import defined variants of that project automatically. Variants must be exported using the Variant Manager on the Mentor side, into a Delimited Text Document - saved with the name ProjectVariants.txt and stored in the same location as the main xDxDesigner project file.

Simulation

48565	Temperature as a sensitivity parameter is now supported.
48638	Group Deviations for Global parameters as a sensitivity parameter are now supported.

Other

47968

CAMtastic: Dielectric layers are no longer shown on the CAMtastic panel. (BC:16249)

Version 22.1.2

Build: 22 Date: 20 January 2022

Schematic

46149	When the Component Pin editor was opened, the component being edited would disappear. (BC:17449)
47615	When one part in a multi-part component is updated to the latest revision, all parts in the same component are now updated to the latest revision. (BC:17162)
47627	The sequence of actions for placing an Image object was changed to avoid placing a zero-height image on a schematic sheet. (BC:17370)

PCB

15590	3D Bodies that pass through a pad hole were not displayed for the portion of the body that exists inside the pad hole. Note that this fix only applies when the 3D model has the Opacity set to greater than 96%. (BC:10281)
39441	After importing components using a script the footprint primitives would not display in the PCB library editor, then when a footprint primitive was clicked on the PCB Library panel an exception would occur.
44339	The presence of a specific object on the board would result in a crash when an IPC2581 file was generated.
45526	A PCB library document is marked as modified when a footprint that includes a rectangle is opened. (BC:15977)
45915	Rectangle object placed in a PCBLib would move when the library was saved, and clicking Undo would break the rectangle. (BC:17523)
45931	Blind, buried, and microvias pasted from another PCB design were not recognized by the ODB++ Setup dialog. (BC:16347)
46174	During ODB++ output generation, connected mid-layer pads could be removed if they were inside a keepout region and the "Include unconnected mid-Layer pads" option was disabled. (BC:17496)
47194	Unrouted Net Constraint violations for non-plated pads were missing location detail in the Messages panel and the PCB Rules and Violations panel.
47195	Keepout objects placed in a PCB design can now be shown in a panelized embedded board array. Note that this feature provides a visual representation of the Keepout layer, copper objects placed on the Embedded Board Array currently do not respect keepouts placed in the source PCB. (BC:7789)
47197	Removing existing teardrops did not always remove the teardrops from vias. (BC:17185)
47303	Manual Expansion tenting settings defined in a Pad/Via library were ignored when the tented pad or via was placed from the PVLib onto a PCB. Note that this update only impacts new Pad/Via edits in a PVLib. (BC:13456)
47304	A Cursor Color option has been added to the PCB Editor - General page of the Preferences dialog. (BC:9402)
47339	Polygons with certain properties would not fill when the polygon style was set to Hatched.
47342	If the DRC 'Stop when XXX violations found' value was very large (e.g., 9 digits), an incorrect value of detected violations would be reported. (BC:16704)
47441	Differential pairs did not change their width and gap values according to the associated Differential Pairs Routing design rule when the differential pair crosses a border of a board region during Interactive Differential Pair Routing.
47828	Improved usability for Top-Middle-Bottom and Full Stack editing in Pad mode of the Properties panel
47933	Further enhancements in support of the IPC-4761 standard ('IPC-4761 - Design Guide for Protection of Printed Board Via Structures').
48014	It was not possible to include the Multi-layer as a visible layer when working in Single Layer Mode. (BC:17546)
48058	Bottom paste mask would not display in 3D if all plane layers were removed from the layer stack. (BC:17518)
48061	The Undo command did not always function correctly after moving components if the Component re-route option was enabled in the Interactive Routing preferences.
48108	Crash occurred during multi-routing.
48136	Footprints containing embedded STEP models were reverting to simple extruded shapes on the PCB document. (BC:17344)
48140	Fixed a bug from 21.9 preventing completion of Interactive Routing in some cases.

Draftsman

45752	A PCB Arc with an angle of 5 degrees or less was missed in Draftsman.
47584	Generating a PDF from Draftsman would fail if the source document included a string with a large font size.

Platform

47331	New 'Show Components and Nets folders' option added to the System - Projects Panel page of the Preferences dialog; use this to control the display of Components & Nets folders in the Projects panel.
48312	Outputjob symbols in the Projects panel were not distinguishable between an outputjob in the project and one that is stored outside a project. (BC:17360)

Data Management

43299	Exception occurred when configuring a BOM report in an OutJob, and specifying a BOM template that resides in a sub-folder of the project, using the Relative Path to Template File option.
46670	A large delay could occur when working with managed components placed from Concord Pro when there was an unstable network connection.
47239	After selecting the History & Version Control > Refresh command, there was no request for credentials for the external VCS, and the VCS status was shown incorrectly. (BC:17234)
47406	Comments that do not belong to any project documents are now shown in the Comments panel.
47583	A component symbol that included arcs in the outline could not be committed to a Workspace, giving the error message 'Failed to create preview files'.
47660	An error occurred when trying to apply the "Revert to" command to a document of a particular project.
47971	The workflow presented during part creation using the Acquire feature from the Manufacturer Part Search panel was different from that presented when using a Part Request.

Simulation

47467	Added Sensitivity Analysis Setup options in the Simulation Dashboard panel and the Advanced Analysis Settings dialog.
48200	The Tables with Measurement's Sensitivity values and histograms are provided to show the Sensitivity Analysis Result.

Other

47934

CAMtastic: Importing an aperture file which contained an aperture declaration with an unusual name would shut down Altium Designer.

Version 22.0.2

Build: 36 Date: 29 December 2021

Schematic

45581	The Fills, Lines, and Pins color boxes in the Properties panel in its Component mode became unavailable when the Local Colors option is enabled, and vice-versa. (BC:16503)
45635	An error retrieving sheets hierarchical structure occurred when attempting to use the "Auto Sheet Number" button with the "Sheet Hierarchical Structure - Depth First" scheme selected in the "Sheet Numbering For Project" dialog for a project with "Net Identifier Scope" option set to "Automatic (Based on project contents)".
45700	In certain circumstances, a schematic sheet document was marked as modified right after opening. (BC:16399)
45983	An error occurred when cross probing to the ERC Report Fatal Error from the Messages panel.
46107	An additional option - 'all project documents' - has been added to the SCH List panel's scoping to display target objects from all source schematic documents for the project (including those that are closed). (BC:15944)
48217	Significant increase in the time to open a schematic template in the PDF viewer when using the Smart PDF feature. (BC:17569)

PCB

44019	Layers and colors of managed footprints were not retained when creating new footprints from Templates. (BC:13639)
45970	Un-Routed Net violations were not identified by the DRC for hatched polygons in a specific case.
46855	With the PCB.RigidFlex2.0 advanced option enabled, primitives were created incorrectly by the "Create Primitives From Board Shape" when a board cutout was partially located outside the board shape.
47145	The ability to specify which parameter can be used as a Local Part Name has been added to the Ansys EDB Export Options dialog. (BC:16910)
47308	Error occurs when layer type was changed from signal to plane.
47359	The statement in the IPC-2581 output did not include the details if that footprint did not have any pads.
47380	Wrong or overlapped information was in the Test Point Report as compared to Gerber. (BC:11684)
47537	Added support for the IPC-4761 standard ('IPC-4761 - Design Guide for Protection of Printed Board Via Structures'). (BC:8186)
47797	Updated several routing-related advanced option statuses.
47878	PCB document within a project was closed without being saved after closing a CAM document within the project.
48554	Fixed a bug preventing the router from reaching some areas.

Draftsman

47452	Primitives for some layers for the Board Fabrication View were missing in the generated PDF.
47625	Added the Counter Hole View.

Data Management

47097	A comment that has become detached/unassigned from its document - a 'lost comment' - can now be viewed in the Comments panel and restored to that document.
47505	Numerous stability improvements in the areas of library migration, and component editing and release.
47548	The lifecycle state color indication for the applied schematic template was shown incorrectly in the Document Options mode of the Properties panel. (BC:17340)
47702	Enabled Show More and the scroll bar in the Components mode of the Properties panel for read-only Device Sheets and Managed Sheets. (BC:17382)
47831	The icon for the virtual BOM entry in the Projects panel is now the same as the ActiveBOM.

Simulation

47462	Added ability to draw columns on plot areas.
47554	Added the ability to display measurements on wave's plot chart.
47675	The statistics for a given measurement array are now provided in the Sim Data panel.
47834	A table view of measurement results is now provided.

Version 21.9.2 HotFix

Build: 33 Date: 30 November 2021

PCB

48033	When the PCB.EngineX option was disabled in the Advanced Settings dialog, pads were not plated regardless if the 'Plated' option in the Pad mode of the Properties panel and the PCB List panel was checked or unchecked. (BC:17502)
48061	PCB: The Undo command does not always function correctly after moving components if the Component re-route option is enabled in the Interactive Routing preferences.
48079	Crash occurred during multi-routing.

Version 21.9.1

Build: 22 Date: 22 November 2021

Schematic

38985	Some bitmaps were truncated in the generated PDF document. (BC:13051)
42470	The Smart PDF output did not include embedded graphics. (BC:17255)
45086	An error occurred when running the Smart PDF wizard for a free document.
45924	WMF and GIF graphics were not printed to PDF by Smart PDF and other tools.
46099	When the revision of the managed sheet is replaced, the Annotation file becomes invalid. (BC:15715)
46176	The Edit > Refactor > Move Selected Subcircuit to Different Sheet command changes the Unique IDs of the parts. (BC:16785)
46690	Custom locations of cross reference parameters are reset to defaults after saving and reloading the schematic document. (BC:17084)
46734	The page scaling in the Print dialog was displayed incorrectly. (BC:17058)
46796	Superscripts located in multi-channels displayed the previous designator rather than the logical designator. (BC:17099)
46853	Wires disappeared when dragging before using the Edit > Refactor command.
46906	The Physical checkbox in the Component Designator dialog will maintain its enabled or disabled state until the software is closed. (BC:12819)
46977	Changed the direction when adding additional ports and pins.
47055	Wire names were not displayed in the tooltip in free documents.

PCB

44082	Traces did not automatically change their width until a trace was placed in the flex region.
45841	Values of alternate part parameters were missing for a design variant that is not selected. (BC:15365)
46209	Error appeared when exporting a Parasolid file when the 'Export All Copper' option was enabled. (BC:15929)
46556	The rotation column did not respect the comma and period separator change in the Pick and Place Setup dialog. (BC:15556)
46842	A crash occurred after loading a stackup, saving the Layer Stack Manager, then returning to the PCB document.
46992	No Net split planes were not detected in the Unrouted Net rule. (BC:12252)
47061	Unnecessary controls were selected when using the Tab keyboard shortcut in some object properties panels (BC:11281)
47127	Pads that were set to 'rectangular' and contained a hole size equal to its length were not displayed in the Drill Table.
47129	Discontinuity occurred in generated STEP files if a bending angle contained a negative value.
47182	Hatched polygon pour did not obey polygon cutouts near obstacles, which caused violations to occur.
47192	Polygon pour speed was improved for complex boards with a big number of pads or vias.
47227	The 'Obey Polygon Cutout' option has been added to the Polygon Pour properties.
47261	Routing with conflict resolution on 'Push Obstacles' caused the software to crash.

Platform

46248	DRC HTML reports were blank when projects were stored on the driver/folder with write protection. (BC:8575)
46974	The size of the dialog upon closing will be maintained when the same dialog is reopened.
47120	The Properties panel would update very slowly when using an SVNDBLib.
47199	A typo in the Release Preferences dialog has been fixed.
47376	A crash occurred with two open documents using a split-screen after resizing an unpinned panel.

Data Management

42690	'Copy Folder Structure' command did not work in the Explorer panel. (BC:14829)
46494	The project repository type was incorrectly recognized and the Make Available Online operation failed.
47203	The speed of DBLib migration has been increased when migrating large libraries.
47242	The "- Snapshot from " suffixes are now added to generated design snapshots to distinguish them from live (WIP) designs.

Import/Export

45878	A DC-shortened net error occurred for net tie components with through-hole pads in the Ansys Exporter.
46865	Added the ability to import Zuken schematic/part LCDB libraries.

Simulation

46951	The Measurements tab has been added to the Output Expressions dialog.
46952	Measurement information is now provided in the Output Expressions region of the Simulation Dashboard panel.
46953	The Measurements tab has been added to the Sim Data panel.
47364	The option to switch on\off the calculation of measurements has been added on the Measurement Tab of the Sim Data panel.
47367	The 'Always Generate Model Symbol for Manufacturer Part Search Panel Using Simulation Model Description' option has been added to the Simulation - General page of the Preferences dialog.
47457	A model file error was displayed in the Simulation Dashboard panel for an IC component model when the Initial Voltage parameter is set. (BC:17342)

Version 21.8.1

Build: 53 Date: 21 October 2021

Schematic

41224	The Port Actions > Toggle Selected Ports IO Type command did not function correctly.
42660	The page tiling and scaling in the Print Preview dialog was incorrect if the paper size is smaller than the schematic sheet size with the scale set to 1 (BC:15727).
46253	Some footprints that were generated from the database library could not be found in the Footprint Manager.
46281	Footprints could not be found for mechanical parts after certain libraries were compiled.
46324	An error occurred when running the Tools > Signal Integrity command for a particular project that had a large model description.
46433	Pin designators were far from pad numbers at some custom pin configurations when pins are mapped to multiple pads.
46482	Dark objects were unreadable when viewed in the Snippets panel.
46566	Crash occurred when reloading a schematic document modified externally.
46725	Formulas with scientific notations were not interpreted correctly.
46726	The 'ABS' and 'ROUND' System Query Arithmetic functions did not function correctly.
47079	The print preview only displayed the active document instead of all schematic documents in the project.
47092	Some graphical images were stretched in the software and Web Viewer. (BC:17163)
47111	A list of text copied from Excel was pasted as bitmaps rather than net labels after enabling the 'Paste as Net Labels' option in the Smart Paste dialog. (BC:17212)

PCB

44660	The system was not responding while pushing a design through MCAD CoDesigner.
45188	An error occurred when saving a PCB to the PCB 4.0 Binary File format. (BC:16203)
45432	An extra Board Layer Stack entry was displayed under the Component Layer Pairs group in the View Configuration panel.
45583	The cursor was no longer large when 'Large 90' was selected as the Cursor Type on the PCB Editor - General page of the Preferences dialog. (BC:15913)
45816	Pullbacks were not shown and an incorrect number of split planes were created on a specific PCB design.
45945	Vias without a drill pair assigned were not listed in the Hole Size Editor mode of the PCB panel. (BC:16225)
46178	Selection made with the Enter or spacebar keys caused data from the Properties panel of an object to be deleted.
46638	Incorrect un-routed net violations appeared after running the DRC.
46685	A delay in the Properties panel setup results in an invalid multi-line width text box for Interactive Routing.
46688	Error occurs when the last Placement > Room Definition rule is deleted.
46691	Project Releaser failed for an output job with PCB 3D Print through Folder Structure container. (BC:16725)
46754	Layer Drawing Order settings were not saved to preferences files. (BC:13983)
46759	After copying a footprint, mechanical layers were not correct.
47069	An error occurred when opening the composite drawing output for some PCB documents in an Outjob. (BC:17193)

Draftsman

45881	The approximation of a board outline that includes an arc of a large radius was rough.
45907	Some objects are missing in an exported PDF file. (BC:15122)
46231	Error occurs when a generated PDF tries to open.

Platform

46199	The Updates tab of the Extensions & Updates page has been improved to always show the most current version at the top of the list.
46272	Panels were grouped in fractal mode regardless of the UI.DisableFractalMode advanced setting.
46729	An error message appeared after granting access to a project.

Data Management

45269	After modifying more than one footprint in a component, update of components using the same footprints was incorrect.
46383	A error occurred when reverting a revision of a project document through the Storage Manager panel if this document has been renamed.
46425	The 'Custom Data Synchronization' overwrites the PartId during synchronization.
46544	The Comments panel loaded comments endlessly after running comment placement if automatic signing in to AltiumLive is disabled.
46764	Added a BOM item to the Projects panel.
47130	The private server license did not release the license when the software was closed. (BC:16547)

Import/Export

44330	Pads and vias were converted into hatches after exporting using the Export to AutoCAD dialog.
47150	Comment export was not possible when connecting to an on-site Workspace.

Simulation

45937	Added 'Format X Axis' to the Plot menu to allow independent zooming for separate plots.
45985	Added the ability to set the X-axis expression in the Add Output Expression dialog.
46536	The option to zoom plots separately is now provided in the Document Options dialog.
46720	Added smart pin mapping to the Sim Model dialog.

Version 21.7.2

Build: 23 Date: 29 September 2021

Schematic

43550	The Edit > Replace Text menu command does not function correctly when wildcards are used in the Text To Find field.
44111	Implemented a "Schematic was done in newer version" warning to notify users that new functionalities were introduced between the version of Altium Designer that was used to create the schematic and the version used to open the schematic document.
45068	The last copied object was not always pasted on schematic when Copy/Paste commands were executed very fast. (BC:15686)
45810	The Show Net Color Override command does not work correctly when using F5 or when invoking the command from the View menu. (BC:16912)
45967	A background compilation error occurred after opening a specific project, and a crash occurred after performing some operations on its schematics.
46017	The value of the VersionControl_RevNumber special string was not displayed on the schematic in a particular case.
46066	The Find Text - Jump dialog can now be closed by using the Esc key. (BC:7891)
46166	Added ability to show all Parameters in the Component mode of the Properties panel. (BC:16344)
46269	Two digital numbers surrounded by parentheses were interpreted as a number rather than a string in the concatenation of parameters. (BC:16816)

PCB

33225	Added ability to disable the use of paste mask to the Paste Mask Expansion design rule, the Pad mode of the Properties panel, and the Pad Template Editor. (BC:9120)
44018	Document could not be saved after reconnecting to a VPN. (BC:15217)
44822	Software performance degradation during layer cycling when a routing via needs to push too many objects.
45535	When placing non-inverted graphics, some QR codes are placed incorrectly with an extra filled rectangle. (BC:16478)
45536	Location of the ".VersionControl Rev Number" special string was changed on a PCB after saving the document. (BC:16458)
45589	Moved layers resulted in incorrect page sequence in outputs.
45751	Work guides disappeared while slicing polygons.
45783	A custom grid was not displayed on a PCB until a new grid is added.
45895	Added the Room mode of the Properties panel. (BC:9310)
45971	When a polygon cutout is indirectly built to a net tie footprint, using the 'Verify Shorting Copper' option of the DRC generates a net tie verification failure.
46150	Hatched polygon pours do not respect polygon pour cutout boundaries. (BC:3579)
46151	Improvements for interactive routing with SMT rules include rules are now applied when using 'Any Angle', routing does not fail if all allowed exits are blocked, and routing is more stable after exiting an SMD.
46180	If a Line primitive is not on any of the assembly layers used in a component, the Variant 'Drawing Style' is not applied.
46251	When generating a Gerber report with a design view that is mirrored, the layer description and layer extension do not match. (BC:12325)
46265	Blind vias were copied and pasted incorrectly onto a board.

Platform

44762	When a project is released, the .zip file that is created is not named correctly using the project parameters. (BC:15515)
45762	Performance degradation occurred when opening a PCB if there is an issue with the Collaboration Service connection.
45790	When File > Open Project > Local Projects tab is clicked, the system freezes.
45923	An incorrect icon was used for the 'Comments' command in the right-click menu of the schematic and PCB editors and on the Schematic Standard toolbar.
45943	Performance degradation occurred when pressing the Ctrl+Tab shortcut if libraries on a network share are used.
45969	A pinned or docked state of a panel was not saved after software relaunch. (BC:9777)

Data Management

44653	Obsolete component templates were visible in the Folder Properties dialog.
45688	Renaming a master branch in an external Git repository resulted in absence of project data after making it available on a server.
46126	After auto-updating or refreshing, the project still displays as 'Up to date' and there are no error messages.

Simulation

45804	The ability to sweep more than two parameters in the Parametric Sweep has been added. (BC:16615)
45940	The X,Y scale settings for plots are now kept during the simulation process for opened and saved .sdf documents.
46036	Voltage on an independent voltage source is now supported as an output variable in DC and Transient Analysis.
46042	Power on functional voltage and current sources is now supported as an output variable in DC and Transient Analysis.
46044	Voltage on a capacitor is now supported as an output variable in DC and Transient Analysis.
46046	Voltage on the current switch is now supported as an output variable in DC and Transient Analysis.
46047	Charge on a capacitor is now supported as an output variable in DC and Transient Analysis.
46049	Current for an independent current source model is now supported as an output variable in DC and Transient Analysis.
46051	Conductance on a current switch is now supported as an output variable in DC and Transient Analysis.
46056	Voltage on a voltage switch is now supported as an output variable in DC and Transient Analysis.
46059	Conductance on a voltage switch is now supported as an output variable in DC and Transient Analysis.
46062	Added Waveforms and Functions drop-downs in the Add Output Expression dialog.

Version 21.6.4 HotFix

Build: 81 Date: 20 August 2021

PCB

44591	Software did not respond when importing some x_t format models.
45595	Adding a net to a net class with the ‘Add Selected Nets to NetClass’ command did not update related design rules. (BC:2201)
45781	A wrong Clearance rule was applied during the placement of a via with a chosen template.
45817	Wrong coordinates were displayed in the PCBLIB List panel for 3D bodies.
45818	A newly placed 3D Body in a PcbLib showed incorrect X/Y location coordinates in the Properties panel.
45910	Bottom side components were removed from a specific design after resaving the layer stack in the Layer Stack Manager. (BC:16349)
46309	The 'Undo' command did not function after a footprint was added to a schematic document from SamacSys.

Draftsman

45673	3D component projection lines were shown incorrectly for some components on Board Assembly Views. (BC:10555)
45786	Crash occurred when opening a Draftsman document with a small grid size value.
45799	Extra element numbers appeared for Note objects when the GOST extension is installed.
45825	A custom scale value is shown now in the format of ‘CustomScale:1’ or ‘1:CustomScale’. (BC:7475)
45828	Callout’s Head Style set on the Draftsman – Default page of the Preferences dialog was ignored when placing a Callout in a Draftsman document.

Platform

45870	An access violation occurred when selecting print preview for an Export Comments report in an OutJob file.
46389	On the Drawings tab of the Print dialog, the Parameter Sets option cannot be disabled. (BC:16879)

Data Management

46179

Renumbering lines in the BomDoc does not work correctly.

Import/Export

46188

An error occurred when opening the Import Wizard if there was a custom display scale set.

Simulation

46194

An error occurred when using the Tools > Signal Integrity > Analyze Design > Select Net > Reflection waveforms command.

Version 21.6.1

Build: 37 Date: 22 July 2021

Schematic

36686	Net Color function changed the color of various nets, in addition to the selected net, in the SL1 Xilinx Spartan-IIE PQ208 example project.
38603	When quotes were used to concatenate parameters, the concatenation was interpreted incorrectly in the BOM for components located in the project hierarchy. (BC:12806)
39039	The tooltip was not displayed correctly when a NoERC was placed over crossed wires. (BC:13723)
43137	The Sheet Symbol special string parameter is not displayed correctly in the child sheet.
45036	Multiple differential pair rules were created targeting individual nets instead of a single rule.
45061	Columns are now displayed in alphabetical order in the Parameter Table Editor dialog. (BC:7302)
45340	A new project could not be created in a server.
45694	There are no component parameters in the generated PDF if 'Schematic Prints' is not set as the first to be generated. (BC:3707)

PCB

40616	Drill symbols did not appear in the PCB document for embedded board arrays. (BC:9896)
41415	Cavities are missing in 3D mode. (BC:15550)
42233	Rooms could not be selected if PCB primitives overlapped the rooms. (BC:7641)
42895	New loaded and modified layer color profiles are not saved on the PCB Editor - Layer Colors Preferences page after closing and reopening Altium Designer.
42896	The Board Outline Clearance design rule yielded a DRC violation with respect to Single Layer Keepout objects.
42897	The pad stack preview in the Properties panel does not update correctly.
42898	Design rule forms were inconsistent when accessed through the PCB Rules and Violations panel.
42907	Incorrect violations were displayed when using Back Drills.
43017	One endpoint of the Standard Dimension object could not be moved when placed between two Line objects. (BC:14269)
43307	The Tool Travel field was not populated after generating an NC Drill file. (BC:12805)
43741	Slow performance when accessing the File menu in a PCB library document after restarting Altium Designer.
44308	Tracks could not be selected if a Via was connected to a Plane Layer.
44607	Bikini coverlay polygons cannot be automatically added on certain flex stacks.
44946	Only the Length rule was displayed in the Properties panel when different values for the Length and Matched Length rules were selected. (BC:13214)
45025	Surface mount pads appeared rectangular when the "Rounded Rectangle" shape was used and viewed in 3D mode.
45066	Creating a new rectangle using the 'Place Rectangle' command with the mouse caused changes in dimensions. (BC:15977)
45090	When there was a not-fitted component on the top side, the mark of this component was shown on the bottom side in the PCB printout.
45135	The via stack type changed to Simple mode after the editing of middle layer parameters is undone.
45185	xSignals broke after updating components from libraries.
45195	When Extruded 3D models were on the bottom layer, they displayed inside the PCB in 3D mode.
45197	PCB component parameters from Embedded Board Arrays are now propagated in the Pick and Place Setup dialog. (BC:8387)
45202	Some generated STEP files excluded holes from pads placed on the board outline.
45220	Pad and via previews were displayed incorrectly. (BC:16101)
45222	Duplicates of existing mechanical layer pairs were created for some boards imported from Eagle.
45223	Keepout objects that were generated as copper caused a short-circuit to occur between polygon and track objects when exported from Ansys EDB.
45296	The Design Rule Check (DRC) would jump to the wrong location when a violation was clicked if the Magnify value was not maximal.
45327	The via stack configuration was incorrectly reset to defaults.
45355	Made several routing improvements.
45391	Some multi-line text could not be selected in the PCB.
45530	The layers in some generated NC Drill files were out of order.
45773	Rectangle size was decreased upon each copy and paste operation if the track width was less than 10mil.

Draftsman

43977	Added Clearance and Target tolerances in the Transmission Line Structure Table. (BC:11393)
44069	Mask options were incorrectly applied on the Board Realistic View. (BC:12501)
45175	Software crashed when adding a Draftsman document to a newly created project when signed into the Nexus Server.
45189	Removed unused zeroes for Width and Height in the Document Options mode of the Properties panel.
45235	Component body and designator objects were reenabled after using the Import Changes from PCB command. (BC:16174)
45278	Cross has been added to the Variants Display field. (BC:14198)
45393	Board outlines and holes were displayed underneath the component after the file was exported to PDF. (BC:13380)
45402	Draftsman Board Realistic View cropped any connectors that were on the edge of the board. (BC:13359)
45428	The Layer Stack Stable settings would return to default when a new Draftsman document was created from a template.
45463	Hexagon and flag shapes have been added to the Callout object to prevent conflicts with existing mechanical drawing standards. (BC:13127)
45626	Added a Justification property to the Draftsman Bill of Materials, Transmission Line Table, Drill Table, Table, and Layer Stack Legend objects. (BC:6923)
45641	The Refresh button did not function after modifying a sheet template. (BC:14326)
45785	Symbol placement was not respected when placed as a hole center.

Platform

44296	Crash occurred when opening a schematic library document.
45311	The PCB Editor - Interactive Routing Preferences dialog has been adjusted to save space.
45417	After a DRC is created in a separate window, the system quickly and constantly switches from one window to the other.
45420	Error message appeared when a UNC formatted path was entered in the Document Path field in the System - Default Locations preferences dialog. (BC:16255)
45791	Error occurred when attempting to connect to Altium Concord Pro without an internet connection.
45911	Crash occurred in Outjob files when the print spooler server was stopped.

Data Management

43142	Making Projects Available Online with source files outside of a Project folder is now prevented.
45429	It was not possible to commit a new project into a SVN repository through version control. (BC:16127)
45451	Making Projects Available Online with source files outside of a Project folder is now prevented.
45464	New repository was incorrectly created rather than adding the project to version control.
45632	A generated ODB++ does not display vias when loaded in CST Suite software for 3D analysis simulation purposes.
45758	The Report Manager dialog did not inherit settings and data from the source BomDoc.
45808	When a footprint is edited, mechanical component layer pairs are duplicated.

Import/Export

45200	Centroids (Casm.pcf files) could not be imported from the CAM editor. (BC:3759)
45246	Component values with no entered units in the Comment field were not recognized.
45623	When exporting IPC-2581 components and pads that are located on the bottom layer, they are exported with the wrong orientation.

Simulation

45317	Improved the display of the multivariate analysis results in the Add Wave to Plot dialog.
45320	Added the set of the hyperbolic for AC analysis for output expressions.
45321	Added the set of the trigonometric for AC analysis for output expressions.
45322	Added the set of the constants in the output expressions.
45323	Added the set of the integral functions for output expressions.
45324	Added support of the V(node) syntax as a voltage for a given node in the expressions.

Version 21.5.1

Build: 32 Date: 22 June 2021

Schematic

37962	ECO changes a dot to a comma with the concatenation of parameters if Windows regional settings are set to German where a decimal point is set to a comma. (BC:12774)
39368	Parameter Set values and Differential Pair Routing rules values did not correspond to the Impedance Profile values.
43475	ECO did not remove a duplicated component from the PCB.
43720	The parameter is not rotated after selecting it on the schematic then pressing the Spacebar. (BC:15238)
44056	Regression caused leading spaces to not be trimmed in certain projects. (BC:15416)
44087	The Tools > Update From Libraries command does not allow parameter changes to be reviewed. (BC:15068)
44250	Using the Place NoERC command from the ERC marker right-click menu does not work correctly.
44830	Added the 'Show Automatic Sheet Numbering' option to the System - Projects Panel page of the Preferences dialog and the General settings of the Projects panel.
44839	An ECO does not pass the component classes to the PCB.
45097	Slow performance when panning while actively placing an object. (BC:16091)

PCB

41189	The Component Cross Reference Report in an outjob does not auto update when changes are made to the PCB.
42887	When using the Component Class Generator in the Object Class Explorer dialog, Non-Members are not added to Members. (BC:5219)
43820	Online and batch DRC displays violations for Differential Pairs Routing for 'Actual Width' versus 'Target Width'.
44336	Added a warning about the presence of shelved polygons before generating outputs. (BC:7214)
44345	Enhanced the performance speed of the PCB panel when selecting Nets, DiffPairs and xSignals.
44444	The Via name is blank when the via type is updated to a microvia.
44714	Silk to Solder Mask Clearance DRC does not respect 'Solder Mask From The Hole Edge' option for vias. (BC:11551)
44733	Plane region TH pads have no thermal spokes. (BC:15742)
44744	Added the 'Show <component name> in <space name>' command to the right-click menu of the Component Actions sub-menu.
44809	In the Component Rule Check, Keepout primitives in footprints are treated as unconnected with 'Unconnected Copper' warnings.
44831	The Layer Stack Visualizer is missing from the Tools menu in the Layer Stack Manager editor. (BC:15724)
44836	Error occurred when using the File > Fabrication Outputs > IPC-2581 command.
44851	Added an option in the Advanced Settings dialog that allows disabling of the auto-renaming of polygons.
44869	Error occurred when saving a document if there was a component clearance violation.
44888	PCB 3D Print crops every 3D object that is outside the board boundary. (BC:203)
45054	There was a performance delay when moving several components with parameters when the Properties panel is open.
45089	After saving the Layer Stack Manager to the PCB, stiffener layers are changed to core layers. Stiffeners and adhesives are only available in the Layer Stack Manager in Rigid-Flex 2.0. (BC:16099)
45256	Added the PCB.Component.AnyLayerPlacement option to the Advanced Settings dialog that restores the ability to place PCB components on any layer. (BC:16253)
45426	Polygon repouring did not work correctly in hatched polygons in rigid-flex designs. (BC:16192)
45439	The Board Outline Clearance design rule option was not respected in certain solder mask and paste mask layers.
45462	Solder mask and paste mask layers were not present in gerber files when rigid flex was used. (BC:16349)
45473	Only unique solder masks and paste masks will be generated on separate layers, while standard solder masks and paste masks will be generated on the same.
45477	Only unique solder masks will be generated in order to separate ODB++ layers.
45483	After changing the diameter of a via, the clearance violation is not detected with online or batch DRC.

Draftsman

44716	The Draftsman Sheet managed template is not displayed on the Properties panel.
44758	Paste and Solder Mask Expansions for regions, fills, and pads are not displayed for primitives placed on outer layers of flex (thinner) stacks.
44886	The Draftsman - Defaults and Properties panel options are different for Callouts. (BC:10052)

Platform

43487	Crash occurred after clicking while in the component editor tab.
45437	Crash occurred when an ODB, NC drill, or gerber file was opened or generated in Windows 7. (BC:16332)
45488	In rare circumstances, the keyboard would freeze for all applications.

Data Management

41439	Layer settings, colors and grids were not properly transferred for newly created Footprints when using a Template (BC:13639)
44239	If a custom filename was used in an outjob file, the filename did not always follow the filename settings.
44597	The local project folder path is not updated when a project is renamed and reopened.
44639	The error "Server did not recognize the value of HTTP Header" was displayed after clicking "Use local file name" if the project was renamed.
44843	Investigate BOM generation performance when design components are from SQL DBLib.
44945	It was not possible to select a BOM template from a folder in the Reports Manager when connected to a server. (BC:15932)
44999	Added a 'Remove from project' decision dialog that allows you to choose how to remove a document. (BC:15822)
45039	All rows in a BomDoc are collapsed when the document is opened after starting Altium Designer.

Simulation

44372	Default values for simulation model parameters are now used in the Sim Model dialog.
44749	A set of trigonometric functions for output expressions is now provided.
44750	A set of logarithmic functions for output expressions is now provided.
44752	A set of complex operators for output expressions is now provided.
44754	A set of the hyperbolic functions for output expressions is now provided.

Version 21.4.1

Build: 30 Date: 25 May 2021

Schematic

35879	The ModifiedDate string was not updated correctly.
39405	Dynamic Compilation resulted in a loss of connectivity where Pins were incorrectly removed from the Net.
40606	Dynamic Compilation displayed incorrect violation of "Unconnected Objects in Net" when objects were connected.
40722	Symbol parameter locations are reset when one of the parameters is getting hidden (BC:14369)
42608	Changes made on the Schematic - Grids page of the Preferences dialog are not applied to open schematics.
43567	System was slow when using the Paste command on large schematic documents.
43750	When saving a component to the server, an invalid Pin Map error occurred.
43758	Improved performance when selecting parts with a large number of parameters.
44579	Grid was misaligned when metric units were used. (BC:16181)
44976	Cursor was shifted from the snap point after a component was double-clicked in the Components panel.

PCB

40259	Additional options added to filter data displayed on the embedded board array. (BC:2059; BC:6904)
40966	When placing a component with Custom Pad Shapes on a rigid or flex sub-stack that excludes Top and Bottom Layers, there is no Solder or Paste Mask generated.
41181	Custom pad solder masks on flex layers output on the wrong Gerber layer.
42735	Overlay layers did not display on the PCB when they were disabled in the Layer Stack Manager. (BC:14971)
43999	Slot length was not always greater than the Hole size.
44158	When importing files into Ansys, some components (resistors, inductors, capacitors) are not defined correctly. (BC:11991)
44238	Traces in Net Tie type components resulted in "DC Short Net Error" in the Ansys Output.
44246	Restored the ability to change the coverlay color in the View Configuration panel. (BC:13198)
44311	Some components cannot be selected and moved. (BC:15380)
44327	An output job that had a fabrication outputs test point report set to IPC-D-356A report format with an output file that included periods and a PCB document with an embedded board array resulted in a generated file missing the ".IPC file extension".
44328	The UnRouted Net Constraint flags connections made with fills and solid regions of copper if the 'Check for incomplete connections' option is checked, however, the PCB panel states 0 unrouted nets. (BC:15387)
44332	When running a Design Rule Check for the first time, the parallel segment rule was not highlighted or zoomed in on.
44335	When opening a multichannel PCB, the bounding box of logical designators extends to the size of the physical designators. (BC:14193)
44338	When opening an .idx file that was exported from Altium 20.1.3 into an MCAD tool (NX or SOLIDWORKS), only the board without components is shown.
44346	Added the 'Use Animation' option on the PCB Editor - Display page of the Preferences dialog to toggle animation on/off while zooming, flipping the board and switching layers.
44377	Special String for a Parameter displayed its value rather than the name. (BC:14571)
44378	Slow performance when switching to single-layer mode when the PCB panel was opened in Nets mode.
44485	Solder mask expansions are not displayed for multi-layer regions and cutouts. (BC:15828)
44506	There was a memory leak with certain designs.
44543	Added an option to the PCB Editor - Interactive Routing page of the Preferences dialog that allows you to specify the number of pins when the 'Move component with relevant routing' option is enabled.
44627	After running the Tools > Remove Unused Pad Shapes command, pads cannot be selected. (BC:15136)
44715	Snap points cannot be placed on the edge of a 3D STEP model.
44724	Dragging a component is slow when there are a large number of layers.
44740	A Board Cutout with an edge on a bending area causes a folding failure on the flex board.
44776	Custom pad solder masks on flex layers output on the wrong ODB++ layer.
44871	Optimization for unnecessary postprocessing when modified primitives cannot affect DRC. (BC:3327).
45027	Pullback distance on internal planes is not displayed in 3D mode.

Draftsman

39981	Route Tool Path displays incorrect dimensions. (BC:11557)
40712	After changing the Variant for a BOM item, the change is not displayed (BC:14128)
44110	Improved the display of parameter priorities. (BC:9567)
44258	It was not possible to add a local Draftsman template when signed in to Altium 365. (BC:13957)
44531	Layer Stack Legend font settings were not saved when the document was reopened.
44556	Through-hole and SMD pads were not displayed in the Board Assembly View. (BC:8959)
44617	When the designator of a component on the PCB is changed, the component designator and component body resets to their defaults for the component in the Board Assembly View. (BC:12338)
44654	Comment and Design Item ID have been added to the parameter drop-down list in the Component Display Properties dialog. (BC:11330)
44675	Placing a graphic file (*.jpg) causes a large file size increase.
44712	Added the 'Show No BOM' option for the Board Isometric View, which, when enabled, displays the part in the Board Isometric View even if it is not in the BOM. (BC:9331)
44729	The Component Display Properties could not be saved as a template. (BC:11052)
44769	If Callouts that are not pointing to a source are being used in Draftsman documents, the Print option and export to PDF fail.
44773	The Use Document Font option did not use information from the document template.
44802	An exported PDF with a Drill Drawing View is an extremely large file. (BC:10921)
44805	Tented vias were hidden when the SolderMaskExpansion design rule was applied before a document was updated.
44853	Added the ability to select multiple components in a Board Assembly View. (BC:13266)
44875	Added the 'Override Color' option for a Board Fabrication View that allows you to set the default color for all layers. (BC:14651)

Platform

44333	If a design component description contains a special character (for example, ®, °, ²) and a space at the end, the ECO for updating this description appears with every PCB update when it is reopened.
44457	When a panel header was clicked, all other panels that are docked to that panel were initialized.

Data Management

38113	Database libraries that have been converted from OrCAD CIS using the [OrCAD Library] Field mapping reports the models as missing when using the Components panel.
43198	The ability to migrate existing git/svn repositories to Altium 365 after rehosting or registration has been added. (BC:7667)
43887	Added a BOM Compare report for managed projects that include a BOM document that displays what was changed in the release.
44297	Project Releaser caused an abnormally long wait time if no modified files were present during VCS check.
44445	Error occurred when saving a file to the server.
44815	The Save to Server reminder dialogs were added upon project closing.

Import/Export

41381

Added the ability to import Allegro footprint files (*.dra). (BC:8580)

Simulation

44144	Altium Designer closed after adding an output expression in the Add Output Expression dialog.
44389	Added a quick access list to set the simulation model in the Sim Model dialog.
44391	The '.func' command, which defines functions used in expressions, was added in the netlist parser.
44392	The '.func' command, which defines functions used in expressions, was added in the math expression parser.
44655	Added new output expression window to provide extended wave to plot compatibility
44656	Added additional fields to the Add Output Expression dialog to provide wide wave to plot compabilitbility.
44756	Added support for a Windows dialog when choosing the simulation model.

Version 21.3.2 HotFix

Build: 30 Date: 29 April 2021

Schematic

44949

A text string displayed in in-line mode is cut off depending on font style and size.

Data Management

44601

All rows in a BomDoc are collapsed when the document is opened after starting Altium Designer.

Version 21.3.1

Build: 25 Date: 22 April 2021

Schematic

37299	Repeated font setting actions were needed to apply properties for multiple text objects. (BC:13764)
37517	The justification of net labels printed to a PDF with Physical Structure is incorrect if the justification is set to Right. (BC:13190)
37942	Smart Edit for a pin designator in a schematic library document does not add the numeric value when using the formula '!+' and there is failure error.
38680	Received error during netlist generation. (BC:13579)
39340	The position of the string over the not-fitted component's graphics was not aligned to the center of symbol. (BC:13856)
39602	Project templates containing schematic sheets in the subfolder resulted in invalid messages about duplicate designators and several sheets with the same name.
40688	Font settings were not properly displayed if schematic templates with other fonts were used.
42014	"Output Sheet Entry" connection was not detected if the violation was set to 'Warning' or 'Error'.
42728	Text with a hyperlink does not move from its origin/pointer location using the mouse or keyboard.
43055	Incorrect Variant UniqueID values were shown in the Schematic document.
43088	Special strings in schematic don't reflect project options parameters (BC:15754)
43139	Some schematic files displayed a blanket as diagonal lines. (BC:10481)
43493	The visibility of the "Comment" Name was not saved after applying changes in the Schematic - Defaults page of the Preferences dialog.
43574	The delete command was not available for a Schematic Library sub-part.
43596	It was not possible to edit a text object editing if it was selected by the mouse's right-left selection motion. (BC:15282)
43603	The Find Text - Jump to Results did not adhere to the zoom level set on the System - Navigation page of the Preferences dialog.
43618	An ECO from a schematic to a PCB added a new part and removed the previously added part on the PCB. (BC:15182)
43879	Text wrapping for a note does not work properly. (BC:15269)
43944	It was not possible to select local schematic templates when the layout customizations were already configured.
44030	Improved the Ctrl+F search text tool to find part parameters.
44112	Missing BOM variants for multi-part components if the variants were on different sheets of the hierarchical design.
44259	When multiple sheet entries were selected, they could not be moved smoothly and precisely.
44289	Received an error during ECO if pad designators contained dashes. (BC:15530)
44355	Software froze when closing Altium Designer.

PCB

24505	Error occurs when generating a PCB 3D Print with a Render Resolution of 300 and 600 DPI.
40536	The Board Information Report was not taking hidden nets into account for the 'Routing completion' information.
41867	Design Outputs did not export the rotation of pads from the Solder Mask layer for a package correctly.
42009	Snapping does not work properly when dragging vias or tracks if the corresponding snap options are enabled in the Properties panel. (BC:14503)
42231	Snapping to the board edge did not function properly.
42357	Snapping to arc centers did not function properly. (BC:5444)
42358	Snap points were displayed even though they were disabled in the Guide Manager region of the Properties panel. (BC:12451)
42516	Added the ability to lock 3D Board Regions. (BC:15248)
43459	Added a custom grid for MCAD coordinates.
43694	An issue caused text placed on a polygon to not be selectable after the polygon was moved or flipped.
43698	An issue caused two pads to appear in the selection window of a PCB Library document although only one was placed.
43827	Changing only the visibility of layers showed the document as modified. (BC:15072)
43833	Added the 'Include Miters' option to the Interactive Sliding mode of the Properties panel to treat miters as normal tracks when dragging.
43864	"The input value is invalid" warning was shown for the Snap Distance if a Snap Grid value was selected.
43892	When rotating components, the rotation of 360 degrees is now displayed as 0 degrees. (BC:14474)
43924	Added hotkeys to control the height of Sawtooth tuning patterns.
43950	Added control over dragging a track with or without an attached miter. Press the C shortcut to toggle the Include Miter mode.
43961	Pressing 'Tab' in the PCB document resulted in lost symbols. (BC:10716)
44001	Removed the visible gap on the edge between 2 regions with different layers stacks for the Rigid-Flex design.
44012	The Direct Connection between a via and a polygon changes to a Thermal Relief connection automatically when the via is connected to a track and is moved.
44081	The Layer Stack Manager incorrectly loaded with "Stack Symmetry" disabled and the surface finish layer removed.
44094	Added the PCB.Rendering.MultiselectionDrag option in the Advanced Settings dialog to control multi-selection rendering.
44095	Masking and Highlighting did not work for trace and via sliding.
44113	ODB++ outputs with 'mm' units selected resulted in an incorrectly generated polygon.
44145	The PCB was rendered without the solder mask through semi-transparent 3D models if the 3D model was embedded in a component footprint. (BC:15468)
44151	The board cutouts of Embedded Board Arrays were not displayed in 2D View mode.
44159	Component layers were not shown correctly in 3D view for the Rigid-Flex design. (BC:15400)
44171	Vias without drill span assignment did not get generated in ODB++ files.
44207	"Conductive" and "non-conductive" were misspelled when using Printed Electronics in the Layer Stack Manager. (BC:15536)
44226	The texture was not displayed on the rotated 3D Body in the PCB document. (BC:15493)
44231	A bug in Automatic Loop Removal in presence of partial vias has been fixed. (BC:15030)

Draftsman

37306	Transparent hatched fills are not displayed in exported PDFs.
38928	The Undo command only changed one instance rather than all when the "Apply changes to all instances of same BOM item" was enabled in the Board Assembly View mode of the Properties panel. (BC:13710)
40419	Components through hole pads were not displayed on Board Isometric View and 3D bodies were displayed incorrectly. (BC:8126)
42611	Repositioning and modifying the BOM table resulted in the table's removal from the Draftsman document.
42710	Error occurs after placing a Layer Stack Legend or Board Fabrication View.
43004	Linear Dimension units were sometimes changed from inches to millimeters. (BC:11134)
43761	Graphics on a PDF output were not rendered properly. (BC:13175)
43874	The Draftsman BOM column justification was lost after adding a new column.
43875	Unable to edit Ordinate Dimension object properties. (BC:11760)
44021	When a parameter is changed for several callouts at the same time, the location of all callouts are moved to one location. (BC:14311)
44424	The title of the note from the Draftsman template was deleted upon use in the new Draftsman document. (BC:10034)

Platform

40281	Mouse-clicking and typing was unreliable and often caused parameters to be set incorrectly. (BC:10716)
43972	When creating a new project, the 'Create Project' icon remains on the screen although the project is created. (BC:14747)
44255	There was a slowdown when expanding nodes in the Projects panel.

Data Management

33989	Error occurred when trying to clone a component in the Explorer panel if the folder's template of the cloned component was deleted.
42383	Sorting in ascending/descending order, the display of parameters and units of measure did not work properly in the Explorer panel. (BC:14822)
42818	The BOM and the Manufacturer Part Search panel did not display the same suppliers.
43209	Improved the performance speed when using the Manufacturer Part Search panel.
43260	Exception error "Member not found" message during save operation when Custom Data Synchronization was installed.
43668	The Run Version Control > Compare with Head command did not detect changes.
43723	An error would appear when attempting to assign an existing footprint to a newly created component.
44007	System performance is slow when generating a BOM to Excel without a template.
44141	Improved comment exporting.
44640	Hard crash occurred when attempting to save a footprint in the Single Component Editor. (BC:15599)

Import/Export

44023

The Ansys Exporter generated pads on the wrong layers. (BC:15437)

Simulation

38878	Excluding Part from Simulation resulted in a "Could not map pin" error message.
42053	Added the display of Simulation Results in the Simulation Dashboard panel.
43279	The 'temper' variable is now supported in math expressions for LTspice models.
43280	The 'idtmod' function is now supported in math expressions for LTspice models.
43300	The delay function is now supported in the Transient Analysis for LTspice models.
43535	BJT output current plotting in AC analysis is now supported.
43649	The settings for additional Group Tolerances in Monte-Carlo analysis have been added to the Advanced Analysis Settings dialog.
43674	Added Interval and Period options for Transient Analysis in the Simulation Dashboard panel.
43991	Added the 'RnodeToGnd' advanced parameter (used to process the DC path to ground) with a default value of '1e12'.
44015	Default values for AC analysis are now used in the Advanced Analysis Settings dialog.

Version 21.2.2 HotFix 2

Build: 38 Date: 19 March 2021

Schematic

44177

A regression caused a crash to occur after placing a Harness Entry if the "Enable Auto Pan" option was enabled.

Data Management

44280

A regression caused the software to slow down due to recurring duplicate requests sent to SettingService.

Version 21.2.1 HotFix

Build: 34 Date: 11 March 2021

Schematic

44132	A selected item is invisible while using the Edit > Duplicate command.
44133	Dragging multiple items by Ctrl+Left mouse button leaves a copy of the items in the original location until the drag is completed.
44134	Zooming on a schematic document did not function properly if an object was Copy and Pasted in. (BC: 15471)

PCB

42633	A polygon did not respect the clearance rule for the board outline. (BC:15474)
42664	Error occurred after clicking Enter to commit tracks that have been dragged.

Version 21.2.0

Build: 30 Date: 4 March 2021

Schematic

38596	Differential Pairs contained in Harness signals were disconnected in the PCB after updating the design.
39170	Duplicates of device sheets appear in the Projects panel. (BC:13706)
40587	The results of the Copy and Paste commands were not saved in the Variant Management dialog. (BC:14237)
42499	Changing the Font Size to "10 pt" was not possible in the Schematic document. (BC:15146)
42633	Port Cross-Reference error message was missing upon the failed attempt to add to the project. (BC:14810)
42664	Objects that were locked using the SCHList panel are not locked and the Locked option is unchecked when the schematic is closed then reopened. (BC:15107)
42920	Image files places from the network folder could not be placed on a schematic.
43010	Objects still follow the mouse cursor after releasing the left mouse button while moving objects using Ctrl+left mouse click.
43161	Redundant sheet numbers were added in Port Cross Reference values in repeated instances of the port.
43235	The Zooming level in the Highlight Methods region of the System - Navigation page of the Preferences dialog was not followed and did not take pinned panels into account. (BC:15017)
43245	A wire did not return to its initial state if moving a wire vertex was canceled using the Esc key. (BC:15038)
43248	Pin parameters that reference parameters from a database were not displayed correctly. (BC:14990)
43454	A generated PDF outjob did not add the correct variant parameters to the title.
43710	A schematic outjob did not update variant parameters. (BC:15229)
43718	An issue caused cross references to adopt signal names rather than port names if a few different ports were connected to the same signal.
43837	System is slow when pasting with the Shift key.

PCB

36537	The Top Solder Layer name was incorrectly replaced with the Top Flex Coverlay name in the ODB++ files.
39852	An issue caused an error to occur after the via hole size was changed and the width field data was applied.
40438	Internal layers were missing after generating PCB from an exported CAM file.
41218	Exporting ODB++ outputs resulted in the incorrect values for Copper weight when metric units were used.
42695	Performance degradation occurred when attempting to fold Rigid-Flex design.
42836	Components that contained incorrectly built circles were unselectable.
42889	If a PCB layer had two or more polygon pours with the same name, the checkboxes in the Polygon Pour Manager could not be easily selected.
42890	Connection Lines disappeared when the True Type text bounding box contained multi-line text.
43091	When ODB++ Fabrication outputs are generated, the text in the Drill Table and the Layer Stack Table is not displayed.
43150	Board Outline Clearance produced false violations when changing the Board Shape. (BC:15199)
43213	Added several improvements to the PCB Rectangle object.
43306	Teardrops settings were not saved in the system after configuration. (BC:7990)
43328	Added an aspect ratio option to the Rectangle mode of the Properties panel.
43373	Improvements were made to routing including pad stability support for round pads and the ability to create concentric arcs during retrace and dragging of differential pairs.
43451	The Rules and Violations panel incorrectly displayed several 'Net Antennae' violations.
43612	PCB is rendered without Solder Mask visible through semi-transparent 3D models. (BC:15261)
43623	An invalid Clearance Violation appeared after correcting the diameter size for the top layer Pad of a Via.
43638	Running the Design Rule Check with 'PCB.EngineX.Instancing' enabled took 60 times longer than with the disabled option.
43648	Certain PCB documents were not saving properly and resulted in an error message.
43664	Design Rule Checking resulted in Unrouted Net errors for uVias. (BC:15180)
43665	After placing a 3D Body component, the texture is not displayed in 3D Layout mode even though it is displayed in the PCBLIB. (BC:15399)

Draftsman

43611	Error occurred while importing changes from the board when the Route Tool Path was defined in the PCB but primitives have not been placed. (BC:15049)
43898	Error message populated when attempting to update templates. (BC:15342)

Platform

43453	Text scaling when not using a 4K display in the Properties panel resulted in missing text.
43705	An issue caused folders to disappear in the Explorer panel after changing the folder type to "ComponentTemplates" when connected to a Standard Workspace.

Data Management

37441	Incorrect Parameter values were shown for Variants in the Pick & Place dialog.
42936	Clicking the Search button in the File-based Libraries Search dialog when Footprints was selected in the 'Search' in drop-down resulted in the search being executed yet the search spinner remained.
43045	Improved Save to Server interface for version-controlled projects and file-less items.
43344	Two new violation types have been added to the Component Rule Checks to prevent duplicate components by Name and PCL in the Single Component Editor.
43634	The 'Remove from Project' command has been restored and renamed 'Exclude from Project'. (BC:15179)
43726	Error occurred when releasing a component.
43779	Using a UNC format for network paths on the Data Management - Templates page of the Preferences dialog resulted in an error. (BC:15275)

Import/Export

39692	Stackup and materials data from Altium Designer can now be imported to the ODB++ Design Viewer.
40909	The Hyperlynx Exporter now includes component values and part numbers.

Simulation

41400	Added generation of special symbols for SPICE components described by the .model command.
41602	All input fields in the Simulation Dashboard panel for DC, AC and Transient Analysis now contain default values.
43471	Simulation dashboard does not require verification on minor changes.
43512	Added support for *.cir files as SPICE library files.
43588	Improved component model storage to store only the necessary model description.
43671	Reference net name could be specified in Advanced simulation settings
43896	PSpice library files *cir are now supported.

Version 21.1.1

Build: 26 Date: 12 February 2021

Schematic

37746	Using the same Schematic document in multiple projects caused that Schematic document to be multiplied in the Projects panel. (BC:13281)
37979	Components and Nets sections were not displayed after Project Validation contained in the MultiBoard project.
38009	Harnesses nested by using a dot connection resulted in an invalid error message. (BC:13269)
38229	"Synchronize Sheet Entries and Port" option adds "repeat" string to port's name in cases when repeat function was used in sheet entry.
38231	Using "$Component$ChannelAlpha" with more than 26 channels generated a non-alpha index. (BC:13423)
38732	Numeric interpretation of Color was inconsistent between the Properties panel and the Find Similar Objects dialog. (BC:13657)
39107	Dynamic Compilation did not detect changes of alternate parameters added from the Variant Manager. (BC:13784)
39276	Transparency of objects did not display properly in Print preview or in printed PDF.
41201	Pin Swapping did not work in the Schematic.
41520	Using the Zoom command in the SCHList panel fails to work.
42324	ECO incorrectly transferred parts with the same footprint and detected differences from each launch.
42327	The Parameters for Multipart Alternate Variants did not display in the generated PDF.
42387	When "Snap to Electrical Objects Hotspots" was disabled, dragging a part resulted in a lost connection.
42618	NoERC directive suppressed violations that should not be affected.
42758	An extra extension separator dot (".") is added when using Save As to save *.dft files.
42784	Setting Project Variants resulted in an "Object reference not set to an instance of an object" error message.
42789	Copy (String, Index, Count) functions do not work if the Count value specifies more characters than are available.
42790	Copy functions - String, Index, and Count - did not work if the Index Value was greater than 1.
42793	When a schematic has been saved in binary 4.0 format, the schematic opens without any parts.
42796	In-place text editing resulted in a crash when the Enable Auto Pan option on the Schematic - Graphical Editing page of the Preferences dialog was disabled. (BC:12890)
42827	Placing a Harness connector on the Schematic sheet resulted in an error message. (BC:14880)
42941	Adding a SCHLIB file in the Library Splitter Wizard does not function.
42953	"Duplicates not allowed" error message popped up as a result of launching different commands in the Schematic.
42958	ECO incorrectly applied changes to Schematic documents after re-annotation instead of the existing annotation file.
42978	The user-defined parameters for Variants were not shown on the Schematic sheet.
43028	Alpha-Numeric Suffix options were incorrectly applied to single Parts.
43030	Crash occurred when attempting to place parts from the Database Library on the Schematic sheet.
43067	Parameter manager did not work with 'Selected Objects Only' selected in the Schematic Library document. (BC:14931)
43113	Smart Paste commands launched in Symbol Wizard dialog resulted in an error message. (BC:14974)
43149	The Schematic Default primitives from the Preferences dialog did not load. (BC:14886)

PCB

26366	Maximum zoom level was lower for PCB library documents and for PCB documents in 3D mode that are set to Perspective projection in the View Configuration panel. (BC:9409)
31695	The 'BoardOutlineClearance' rule disappears from the waived violations when the PCB is reopened. (BC:14162)
40476	The Component Rule Checks always point to the first footprint in the PcbLib file.
40910	The Unrouted Net violation was not detected for an unconnected pad.
41824	Width rule configured with Impedance Profile resulted in a false violation even when the actual width was equal to the target width. (BC:11506)
41866	Layers were configured incorrectly after placing components on the PCB. (BC:14245)
42184	Snap to Footprint Origin did not function properly in the Footprint Library editor.
42229	Selection in the PCB List panel did not work properly.
42590	Significant memory consumption resulted in a software delay when large designs were opened.
42819	"Unable to Save File" error message popped up as a result of editing/modifying objects in PCB document.
42857	It was not possible to add Snap Points on the 3D body with the speed of the double-mouse click. (BC:14637)
42944	The Top Paste Mask is not displayed in 2D mode until the layer properties are changed in the Layer Stack Manager.
42974	PCB document was incorrectly covered with the Top Overlay layer color in 2D and 3D view upon reopening PCB.
42980	When a polygon that had an unused pad shape removed was repoured, clearance rules were not obeyed. (BC:14891)
43224	The Region Shape Splitter displayed the wrong number of regions after splitting and the shapes were incorrect.

Draftsman

41471	Software crash as a result of opening certain Draftsman documents.
41841	The solder mask color changes after placing a Board Realistic View. (BC:11962)
42195	The incorrect weight units were displayed in the Layer Stack Legend.
42805	Notes placement and editing in the Draftsman document was fixed (BC:12181)
43147	Crash occurred after updating the Board Assembly View.

Platform

40216	Comments usability has been improved to be included in every aspect of the collaboration and review process.
42189	Added support for Single Sign-on.
42419	Software became unusable during the Altium 365 Server outage.
42593	Moving and opening panels resulted in a software crash.
42688	The collaboration notification pop-up dialogs are now blue.
42737	The screenshot quality of the Schematic sheets and PCB design has been improved.
42834	After attempting to share projects in Altium Designer, a message displays stating that the user does not belong to the team.
42872	When trying to create or open a project or file that resides in a shared network folder or network-mounted drive, Altium Designer closes.
43015	The Document Path location specified on the System - Default Locations page of the Preferences dialog is not followed. (BC:14950)

Data Management

38073	Crash occurred when generating BOM from the output job.
40566	Progress status indicator for file-based libraries search was not displayed in the Components panel. (BC:12731)
40853	The Project Releaser has been improved to better support Parameters.
40952	Multi-board schematic template selection did not use the folder specified on the Data Management - Templates page of the Preferences dialog. (BC:13545)
41114	Altium 365 registration is now recognized if a project was added to the external VCS manually after it was registered with the cloud.
41851	Incorrect error message popped up when using the Project Releaser. (BC:14609)
42270	After a failed library migration, the imported components are visible in the Components panel but cannot be edited.
42301	The 'Where Used' logic has been unified for the Explorer panel and the Components panel.
42346	Components used in Templates were not visible in the "Where Used" section.
42474	The deleted Component Template was still displayed on the Data Management - Component Types page of the Preferences dialog.
42533	Added possibility to copy and paste Comment thread as a link.
42686	The Collaboration pop-up dialogs have been restructured to demonstrate when a collaborator appears, when the first editor appears, when the document has been opened for the first time, and when there are changes in the collaborator list.
42694	Renaming a project group does not function properly. (BC:14840)
42795	BOM report had differences depending upon which document was active when the command was run (PCB or schematic).
42812	When using Cross Selection in the Constraints Manager, dark text appeared on a dark background, which made it unreadable.
42928	Nexus Client did not transfer the newly added documents via Version Control to the Project structure.
43050	SIM models are now supported in the Components panel.
43054	Made several improvements to the Project Releaser.
43121	ActiveBOM does not update stock data unless a new BomDoc is added.
43135	The system froze if a footprint had the same name as the component.
43141	Hidden Components prevented non-admin users from adding new components with the same CMP ID.
43146	Files in the Project subfolder lead the Version Control commital to fail.
43200	When the “Register Designator” command was run, an error displayed for the initial configuration of the GOSTBOM directory.
43360	Defined Generic Components will be used for the component search during component replacement.
43605	A crash occurred when a component was acquired from the Manufacturer Part Search panel. (BC:15243)

BOM

42460	Object reference was not set to an instance of an object in the Altium BOM report.
43008	An error occurred when opening a BOM configuration that had referenced a BOM template from another workspace.

Simulation

42048	The fields for the plot number in which the simulation data will be displayed are presented in the Add Output Expression dialog.
42052	Added new feature for renaming Simulation results.
42597	Added independent variable types for DCSweep Analysis in the Simulation Dashboard.
42669	Added F1 capability for the Simulation Dashboard panel.
42740	DDT Function in the Transient Analysis is now supported.
42756	The SDT function is now supported in Transient Analysis.
42903	The delay function for LTspice model is now supported in the Transient Analysis.

Version 21.0.9 HotFix

Build: 235 Date: 11 January 2021

Schematic

41253	User-defined variant parameter values were not displayed on the schematic document.
41983	Alpha Numeric Suffix was not applied for Numeric state.
42325	Variant parameters included in Special strings were not shown on the Schematic sheet.
42845	Parameter values with a dash (-) and zeroes display incorrectly. (BC:14889)

PCB

42726	Paste Masks are not displayed for primitives in the PCB library. (BC:14892)
42863	Dead copper around a Keepout was not removed when repouring Polygons. (BC:14952)
42973	Incorrect 3D models are displayed in the 3D view when the PCB document is opened.

Platform

42572

Access violation in ScriptingSystem.dll during component creation in Altium Library Loader script from Samacsys.

Version 21.0.8

Build: 223 Date: 17 December 2020

Schematic

35995	The Comment Name is not visible while moving it.
36454	DM_CalculateParameterValue function resulted in an error during Script execution.
36952	Pad designators are now displayed rather than the Pin designator in the case of unsymmetrical pin to pad mapping.
37878	'Convert selected device sheet to schematic sheet' option did not remove the converted device sheet from the project. (BC:12665)
37958	Crash occurred when Schematic document and Schematic Filter panel were located on separate windows. (BC:13339)
37970	Components were displayed incorrectly. (BC:13297)
37977	Graphics pasted from Paint are not always added to the PDF. (BC:13351)
38072	"Add Template to Clipboard" option resulted in an exception error message.
38286	Net names were not overridden by Power Port names if Power Ports were connected via Bus. (BC:13449)
38598	Modification of the numeration of compiled sheets is not saved (BC:13586)
38717	Added ability to add parameters to Wires. (BC:11099)
38746	The order of parameters drawing is changed during updating from the library as well as after deleting and performing an undo. (BC:13719)
38929	The grid in the symbol editor is not always aligned to the origin.
39274	Parts with no pins do not snap to the grid when they are placed by dragging from the Components panel. (BC:14364)
40246	The Model Pin Designator was not saved after editing in the Model Map dialog. (BC:14182)
40477	The cutter box graphics in the "Break Wire" tool became invisible when placed over a harness signal object.
40737	'Not fitted' graphics were not centered over the component. (BC:24228,14209)
40871	The interactive PDF navigation for ports and offsheet connectors was not working for flat designs.
41161	Large grey rectangles were incorrectly displayed instead of grey bold net lines when generating the Schematic to PDF. (BC:13824)
41194	Schematic symbol graphics did not maintain rotation after reloading Schematic.
41239	Autocomplete naming function in the Schematic obstructed the ability to customize Port names.
41429	When a Library Report was generated, the graphics were incorrect.
42647	When multiple objects were selected and moved in the schematic library document, the selected objects disappeared. (BC:14832)

PCB

ROUTING-3530	An issue caused infinitely repeating error messages to occur when attempting to modify an existing accordion in some cases.
34900	Added support for component collision checking between component courtyards (objects placed on a component layer pair defined as Courtyard), these are used when there are no 3D Body objects in the components. (BC:3146)
37152	3D body created in SolidWorks 2020 SP1 could not be added in Altium Designer, with no warning message appearing when attempted.
37266	'Distribute Vertically' and 'Distribute Horizontally' commands from the Edit > Align sub-menu performed incorrect spacing between primitives. (BC:13572)
38592	Improved performance for Pad/Via selection with open properties panel and preview enabled.
38652	The delay value in the PCB panel did not change after the parameters that affected the xSignal value were changed, then saved in the Layer Stack Manager.
38875	Polygon Arc approximation creates unnecessarily narrow necks. (BC:4314)
39006	Added polar grid coordinates to Properties panel and Heads Up Display (HUD). (BC:590)
39008	Added the ability to place an image on PCB layer using the Place>Graphic command. PNG, BMP, JPG and SVG formats supported. (BC:10969)
39082	ActiveRoute command ignored 'No Net' Polygon and Region objects.
39159	DRC did not report two or more pins with no connected nets as short circuits. (BC:13783)
39180	Exception error occurred when saving a PCB Library after custom grid settings were changed.(BC:13713)
39247	View Configuration panel custom settings were not saved on certain PCBs.
39663	When multiple layer stacks are used and a 3D STEP model is generated, the flex region was not distinguishable from the rigid region. (BC:9822)
40241	Changing the line radius when placing a line does not work correctly. (BC:14137)
40279	Track width for hatched polygons is not working when hidden and the track width value in the preview differs from the hidden preview. (BC:14225)
40287	The Remove Unused Pad Shapes' command did not work correctly with offset holes. (BC:9744)
40298	When a selected object that has a room within the selected object was moved, the reference point was changed. (BC:371)
40410	Clearance miscalculation when running a Design Rule Check as a result of factoring slot size and ignoring hole length.(BC:11879)
40462	Interactive Routing resulted in a large memory leak when the Swapping option was enabled in the project design.
40618	An issue caused cutouts to be ignored by the Board Outline Clearance for silkscreens, resulting in a design rule violation to be generated. (BC:9144)
40773	Added the ability to save PCB 3D prints using the File>Export command in .png, .jpg, and *.bmp formats. (BC:1397)
40778	Mechanical layers are now displayed in the PCB 3D mode. (BC:301)
40782	The ability to orient with polar grids while moving or dragging rooms or multiple selected components has been added. (BC:9988)
40792	Added 'Remove Loops with Vias' option to Routing Properties panel. (BC:8781)
41122	Added an option in the Advanced Settings dialog to set layer sorting modes.
41182	The Copy All Objects Touching the Room command does not update polygon and via nets for a new channel. (BC:11653)
41348	The accuracy of the selection of tuning patterns has been improved.
41354	Invalid layers are no longer displayed in the layers list for Component placement. (BC:9114)
41425	3D bodies are missing in exported STEP files.
41502	Added "+/-" buttons for rotation to the 3D Body Properties panel. (BC:8583)
41503	Added number keyboard shortcuts for 3D view controls. (BC:7726)
41656	Improved the speed of saving PCB documents on network drive. (BC:2399)
41801	Added dedicated snapping to arc centers.
41826	Added ability to pour modified polygons during Design Rule Check.
42006	Added "Quick Routing" and "Quick Differential Pair Routing" commands to the Route menu.
42087	When trying to route on specific PCBs, the 'Simbeor error. Failed to add material' message is displayed. (BC:14645)
42146	Snapping on the current layer snaps to the Keep-Out layer.
42179	Optimal Void Rotation options was added for polygon. (BC:4314)
42403	In the Layer Stack Manager, added a top panel with modification buttons, the ability to add new types of layers, and in Draftsman, added new layers of support.

Draftsman

39519	Silkscreen primitives for the Board Assembly View were not correctly drawn. (BC:12405)
42061	The "VersionControl_ProjFolderRevNumber" and "VersionControl_RevNumber" special strings were not updated in the Draftsman PDF document after being released and instead displayed a "not in version control" error.

Platform

38800	UI themes support and high DPI support have been added in certain dialogs and editors.
39108	Context menus were not rendered on the second monitor if the main monitor had 4K resolution and High DPI.
40161	Error occurred when generating prints when no 'No-ERC Markers with Symbols' options in the Schematic Print Properties dialog were enabled.
41733	Outjob dialog popup window is now resizable horizontally. (BC:6227)
42008	Restored "Save As" command in right-click menu options for single documents in the Projects panel (BC:14701).
42570	Converting polygons to region objects resulted in a Scripting error.

Data Management

35873	When the Item Manager Automatch option was used, the correct footprint was not selected.
36764	PDF schematic output jobs generated by the Release Manager with the Version Control Revision number resulted in the PDF 'Not in Version Control'.
36880	'Description' parameter column has been added to the Single Component Editor. (BC:12077) (BC:7192)
38668	Added ability to save the component selection after the Refresh command has been used. (BC:13295)
39500	Added the ability to use the "Update to the Latest Revision" command for alternate parts in an ActiveBOM document.
40615	An error appeared after a BOM PDF that contained an image was generated through the PDF Output job container. (BC:14020)
40946	Nexus Client did not show server project templates when "Sign in automatically" and TC2 configuration was used.
40954	'Where Used' section from the Components panel did not display Project Template items.
40955	It was not possible to mouse scroll the scroll bar of the Template's drop-down menu.
41312	The Components panel now supports Simulation Model browsing.
41469	Catastrophic failure when columns grouping was enabled in the Components panel.
41599	Simulation Models Panel to browse the model from the Local libraries storage and Simulation Generic Component Library
41617	Mapping schemas are now supported for component references in DBLibs during Library Migration.
41799	Warning message regarding the disabled Data Management server continued to pop up unnecessarily during startup.
41811	The Manufacturer Part Search Panel now supports Simulation model browsing.
41835	Parameters' visibility in the Properties panel component area is now managed by the user.
41888	The 'VersionControl_ProjFolderRevNumber' and 'VersionControl_RevNumber' special strings were not updated for PDF documents that were generated during project release.
41950	Customize the browse model based on Components panel in Local libraries according to the model UI
42067	The Components panel has updated how Simulation models are previewed.

Import/Export

37344	Protel importer was not importing .DDB files. (BC:13078)
39372	Added the ability to import Pspice schematic files with connected models
40701	A new schematic and symbol library file format has been added to the KiCAD importer.
41034	Stroke Text was incorrectly exported to DXF/DXG as individual tracks. (BC:10437)
41594	Ansys exported .edb file resulted in incorrect layer assignment for single-layer pads.

Simulation

40088	Fourier Analysis has been added to the Simulation dashboard.
40102	Support has been added for switching between SPICE formats - LTspice, PSpice, and MixedSim.
40542	Added output expressions window in the simulation dashboard.
41001	Added support for SPICE libraries in the Components panel.
41109	Transient Analysis UIC flag is now included in Mixed Simulation.
41110	The Run buttons are now disabled if the verification was unsuccessful or was not up-to-date.
41112	Added the ability to select the probe or source from the dashboard to open the Properties panel.
41214	A new feature automatically assigns models for R, L, C components from the Simulation dashboard.
41215	A feature has been added that allows you to choose the source of the included simulation model in the SimModel window.
41216	All simulation models of a project are now stored in a single model file.
41285	Simulation data is now shown on plots according to the type - Probe or Expression.
41299	The Simulation Properties panel has been updated with new features.
41309	Simulation profiles are now autoloaded.
41475	The Simulation profiles processing has been updated as project documents displayed in the Projects panel.
41483	The Component Library of the SimModel window has been updated to account for Altium 365 Simulation.
41505	The feature to sweep parameters in the Parameter sweep by Decade, Octave, and List has been added.
41600	Simulation global parameters, errors, and warnings have been added to the Simulation dashboard.
41749	The models of all placed components are now stored in a special cache library.
41810	The Simulation Model verification is now available in the Sim Model Window.
42047	The Simulation process has been sped up with interactive plotting data.
42051	A new feature allows you to set the color of the probe's plot in the Simulation Dashboard.
42114	The Simulation data of unlocked transient analysis is now displayed in the Probe Window.
42119	Global parameters defined in the NSX text blocks are now displayed in the Advanced Settings Window as disabled items.
42423	Improved Pin Mapping is released for the Simulation models.

Version 20.2.8

Build: 258 Date: 22 March 2021

Schematic

43947

Harnesses nested by using a dot connection resulted in an invalid error message. (BC:14436)

Version 20.2.7 HotFix

Build: 254 Date: 18 December 2020

BOM

41728

The template file name was not displayed in the Bill of Materials report.

Data Management

41675

If models are soft-deleted, the Library Migrator will still recognize them and will reuse them.

Version 20.2.6

Build: 244 Date: 28 October 2020

PCB

40299	xSignals remained broken in the PCB panel after they were fixed and saved. (BC:14110)
40895	Polygons placed on top or bottom layers were not transferred properly to decals in the MCAD CoDesigner panel. (BC:14330)
41040	Polygons were not connected to the correct net in exported ODB++ files.
41133	IPC-2581 export resulted in missing pads for certain components.
41134	IPC-2581: Component designators have a different output name if the original title ended with a letter.

Platform

37983	An access violation occurred when switching to a new Workspace after disconnecting from another.
41064	Crash occurred in Extension Manager when software was installed from Offline installer and extension did not have pictures.
41331	An issue caused the software to no longer be accessible if a modal dialog was open and another application, such as Excel, was used afterward.

Data Management

38702	An exception error was displayed instead of a proper warning during Version Control operation due to unsupported protocol.
41046	When uploading an Outputjob file to the Explorer panel, the Name and Description of the item was removed.
41118	The Project Releaser used the wrong variant in PDF outputs when No Variations was used.

Draftsman

40195

Variant components were not displayed in the Draftsman document. (BC:13900).

Version 20.2.5

Build: 213 Date: 13 October 2020

Schematic

37492	All violations from Connection Matrix were incorrectly added to the "Specific Violations" in the Properties panel after reloading the Schematic document.
39694	The 'Send to back' command caused the software to crash when used outside of the sheet. (BC:12218)
40693	"No top level document to compare with" error message displayed during attempted import of changes.

PCB

40443	When IPC-2581 Fabrication files were output, the project board name was appended to the component designators.
40752	Footprints with the same name from different libraries are now reported with different names in IPC-2581.
40793	No custom layers were propagated in the new footprint when created from Vault Explorer. (BC:13639)
40794	"Tented" option did not take effect for placed Vias after setting in Preferences dialog. (BC:13392)

Draftsman

36441

Solder Mask Layers were not displayed when exporting Draftsman document to PDF. (BC:14384)

Platform

40767	High CPU usage resulted in animations continuing after control was closed.
40986	Enabled outputs for the folder structure container were connected with red lines.

Data Management

39248	PartsSync feature has been added to the software to support Supply Chain in custom providers.
40707	Inability to open a project in Altium Designer through the Altium 365 viewer.
40844	Altium Designer freezes for several minutes when saving a project to a server.
41011	Errors occurred when performing a component rule check if a component had more than one footprint. (BC:14460)
41115	Software was delayed before committing a new project to the server.

BOM

40524

Parameter values with comma decimal separator removed parameter continuity in BOM.

Import/Export

40545

The IPC-2581 output generates incorrect Part Angle (Rotation) information.

Version 20.2.4

Build: 192 Date: 24 September 2020

Schematic

37426	Crash occurred when Fonts were not selected for Pin names or Designators in the Schematic Library.
38385	Placing a specific violation ERC on a net also suppressed all other violations on the net. (BC:13511)

PCB

40257	Output option of "Merge Net-Tie Nets" failed for specific Footprint rotations and gaps between Pads. (BC:14014)
40440	Crash occurred during Differential Pair Routing when the Routing Layer rule was not defined for the layer.

Draftsman

40267	The total board thickness of some placed Board Assembly Views did not match when compared in the Layer Stack Manager and Draftsman document.
40313	Error message appeared during PDF exportation when file was previously opened.

Platform

39450	Local files did not recognize that a project in Altium 365 had been updated.
39695	Symbols did not appear in the preview pane of the Explorer panel.
40389	Opening Output jobs resulted in unresponsive software. (BC:14219)
40399	LayerType settings were not saved after editing a managed footprint.

Data Management

39982	Removed 'Output Jobs' type from Edit Folder dialog for Altium 365 Standard users.
40160	Improved hard-deleted projects handling by removal of the link from Version Control and link to the server project.
40382	"Unable to cast object of type" error message when editing PCL for cloned component.
40617	Project templates still appeared in the Create Project dialog after they were soft-deleted.

Version 20.2.3

Build: 150 Date: 1 September 2020

Schematic

38891	Probes were not recognized in the software.
39554	Move Selection by X, Y in the Schematic Library Editor resulted in the Properties panel not displaying the updated properties of the moved objects. (BC:13981)

PCB

35894	Error message when releasing a project where the drill symbol limit was exceeded. (BC: 12985)
37104	Width rule was not applied to the substack. Use the 'Show values for layer stack' control in the Routing Width design rule to set the width for each substack.
37190	Running DRC on a design returned inconsistent error counts related to the Return Path rule. (BC:14040)
37466	Copper features incorrectly displayed in CAMtastic.
38101	Added control over Gloss Effort to be applied to pushed traces.
38472	Broken Impedance calculations after routing on a PCB with hidden net connections.
38757	The Solder Mask Expansion and Paste Mask Expansion settings were changed after moving pads or making other updates to a pad in a PCBLIB document. (BC:13681)
38798	Crash occurred during placement of Layer Stack Table in PCB.
38992	Invalid Width values for a layer that was not set in Layerstack resulted in an invalid error.
39005	Regions with less than three counts of vertices were still present on the board and PCB List panel when the InPolygon to IsRegion clearance rule was used.
39014	Pad was displayed under Keepout area in Generated Gerber Output when “Include mid-layer pads” checkbox was disabled.
39191	Length Tuning rules were not properly saved after closing and reopening PCB.
39192	The 'Prefer Generic 3D Bodies" mode has been added to the Advanced Settings dialog as a legacy option. (BC:8872)
39202	Via Propagation Delay is now calculated in proportion to the length of the Via used.
39217	The Solder Mask Expansion and Paste Mask Expansion settings in the Pad and Via modes of the Properties panel did not reset to the previous state after using the Undo or Ctrl+Z commands. (BC:13779)
39705	PCB incorrectly activated and zoomed in on placed Comments when switching between documents.
40020	Snapping objects did not work for Embedded Board Array objects. (BC:14150)

Draftsman

36791	Dimensions, images, and fabrication views were missing during PDF output. (BC:12807)
37346	Generated Output PDF Views did not match the Draftsman document.
37955	A compatibility warning was incorrectly displayed in the same version in which the document was created.(BC:14123)
38634	Added "Draftsman.UI.SoftwareRender" option in the Advanced Settings dialog to use software rendering in Draftsman documents.
39587	PDF Outputjob files did not print solder mask polygons with cutouts correctly.
39849	Objects could scale and shift incorrectly after zooming and scrolling, which could not be fixed until the file was closed and opened again.
40021	Variant components defined by alternate parts were incorrectly presented as 'Not Fitted'. (BC:13900)

Platform

37838	Software crash upon startup.
38344	Access violation error occurred after changing any part of the path in the Script Report of an OutJob document.
38368	Removed obsolete file extensions from the Altium Designer installer. (BC:6183)
38377	Some parameters, such as ItemAndRevision, were not being interpreted for OutJob file names.
38968	Preferences located in the %APPDATA%\Altium\Altium Designer folder were not deleted unless admin rights were used.
38999	The Default Prints and Search Paths tabs on the Project Options dialog are now hidden by default.
39092	'File In Use' dialog appears stating that actions cannot be completed if Autocad Fusion and Altium Designer are running simultaneously. (BC:10103)
39397	Added editing support for 'Shared with Me' projects in the Comments panel.
39427	Performance degradation when using File > Recent Documents/Recent Projects/Recent Project Groups commands when files from these groups were located on slow servers.
39746	Software displayed a Warning message that Network Activity is disabled and blocked startup when "Altium Portal" checkbox was disabled in System Preferences. (BC:12850)

Data Management

30525	During project migration via the Item Manager, Component parameters were replaced by Symbol model parameters.
37863	Added the ability to save the component selection after using the Refresh command. (BC:13295)
38247	The "Rename" option has been added to the Projects panel to rename files. (BC:4530; BC:1708)
38310	Fixed regression that caused an inability to connect to AltiumLive after disabling the 'Data Management Server' option from the System - Network Activity page of the Preferences dialog then restarting Altium Designer.
38583	Added 'Include Standard (No BOM) Items' option to the Pick and Place Setup dialog.
38591	Component Synchronization did not support views and did not show all tables. (BC:13599)
38776	Inaccessible Excel-based DBlib components when Excel file of current library was opened. (BC:13387)
38820	Parameters were incorrectly overlapping when made visible after placement from server to document.
38892	Added the ability to Rename managed projects. (BC:10422)
39023	Memory leak in Draftsman.
39065	'Exception has been thrown by the target of invocation' error message as a result of the enabling of FIPS when using Components.
39073	The ActiveBOM document is now named using the naming rule provided by the project template. (BC:13744)
39162	A 'Connection' dialog has been added to connect to available workspaces.
39280	Content Vault was not accessible when not already connected to a workspace.
39382	Added the ability for managed Items to be used as New Document Defaults.
39451	Version Control's 'Commit Whole Project' command did not warn the user of unsaved files.
39552	Resistors were displayed without reloading the entire list in the Explorer panel.
39735	"Navigate to" command from Search in the Explorer panel did not work. (BC:14026)
39781	DBLib column values created from Query Expressions were displaying the incorrect Design Item ID.
39927	Error occurred during Project Releaser due to missing template or insufficient user rights.

BOM

35692	Exception error after signing out of Altium Live account and opening BOM document.
39242	Component revision state for managed components was not available in ActiveBOM for unmanaged designs.

Import/Export

36186	When importing files using the PADS importer, PADS Logic library files were not imported.
39196	PCBs imported from Eagle resulted in the creation of duplicated Mechanical Layer Pairs listed in the View Configuration panel.

Simulation

39446

Case models of digital elements were not found.

Version 20.1.14

Build: 287 Date: 20 July 2020

PCB

39443	The Delay values for xSignals in the PCB-xSignals panel were incorrect when the PCB was opened.
39568	When the Thickness value for copper layers were changed in the Layer Stack Manager, the new values were not saved if the Weight value was not also changed. (BC:14005)

Draftsman

38617

Snap to grid option did not function as intended when dragging. (BC:8351)

Data Management

35158	'Revision ID' field did not correspond to the value of the 'Item ID' field when viewing Revision properties in the Explorer panel.
38232	'Specified file already exists' error message during releasing of Project Template.
39098	Hidden Component Templates prevented the use of naming schema of Folders in the Explorer panel.
39112	Lifecycle state of components did not update automatically after updating in the Explorer panel.
39323	"Server SSL certificate is issued by unknown authority" error message upon the attempt to open the Components folder in Explorer panel.
39391	When the Operations > Export Grid command was used in the Explorer panel, the RevisionID and Revision were not properly exported.

Version 20.1.12

Build: 249 Date: 29 June 2020

Schematic

38653	SVG graphics placed on a Schematic document were not present in the generated output PDF. (BC:13351)
38871	Messages panel did not automatically open after compiling a project. (BC:13313)
38872	ERC used logical designators instead of physical designators, resulting in Component error messages.
38955	Violation markers did not appear on placed components if a new Schematic document was saved directly after creation.

PCB

39012

Snapping to Via did not work properly in the PCB Editor.

Platform

38579	'Change component type' command is now available from the context menu of the Library Migrator.
38973	Connectivity monitor caused false reconnects resulting in interrupted user experience.
39063	Exception error upon starting software.

Data Management

38529	Error when scrolling through Part Requests in Explorer panel.
38589	Improved Library Migrator by adding 'Change Component Type', 'Exclude from Migration', and 'Add Library' commands to the right-click context menu.
38812	"Search server components error" message appeared after attempting Integrated Library migration.
39018	Properties panel did not display the current revision status of a Component by default and did not refresh automatically.

Version 20.1.11

Build: 218 Date: 3 June 2020

Schematic

37555	Vertical scrolling and auto-panning did not function properly in a Schematic library document after attempting to place a pin object.
37801	No import performance occurred when attempting to import a DFX/DWG file.
37917	Unconnected pins ignored inherited net classes. (BC:13238)
38149	When connected to a server, a crash occurred when changes were made in the schematic editor.
38242	Graphical editing keyboard shortcuts closed when attempting to move Schematic objects, causing data loss in objects if the F1 key was used during dragging. (BC:13188)
38357	File extensions in *.PrjPCBStructure of certain schematics were removed upon saving.
38488	Crash occurred when opening some Schematic Library documents. (BC:13522)
38536	The newest revision of a Schematic template was not immediately available for use upon saving. (BC:13578)
38575	Diagonal wires caused improper connectivity and shortened nets when updating the design. (BC:13597)
38694	Certain edit operations in the Schematic caused a disconnect of power ports from sheet entries.
38889	Clicking the parameter visibility icon in the Properties panel did not change the parameter visibility.

PCB

35306	Project Releaser displayed incorrectly auto-generated naming formatting for PCB Assembly Variants.
37522	ECO failure when importing changes from (or silent crash when inserting) a PCB into a Multi-board Assembly document that contained a specific board cutout. (BC:13054)
38404	Colors configured in the PCB Editor- Layer Colors Preferences page were not saved.
38444	Error message after generating an ODB++ file from an embedded board array when using mm units then importing the file into CAMtastic.
38465	Error occurred when trying to view the Layer Stack Manager.

Draftsman

37925	Incorrectly overlaid components for different variants.
38505	Special strings were not recognized on Draftsman outputs for ‘No Variant’ Assembly and Fabrications.

Platform

35584	Select dialogs and panels experienced issues in certain UI themes and high dpi monitors.
38059	Error in managed components caused empty designator fields and batch settings to not function.
38503	Added ability for unmanaged templates to be used while connected to Altium 365.
38731	Server configurations defined in preferences were not applied in the software.

Data Management

35371	Freeze occurred when entering an incorrect setting on the Item Naming tab of the Project Release Options dialog.
35614	Components placed from the Components and Explorer panel did not contain information about the simulation model. (BC:12770)
36200	Column sorting did not work properly in Components panel. (BC:12505)
36601	Exception error when scrolling through Explorer panel after adding columns. (BC:12728)
36873	Improved performance when releasing with a newly-created or edited footprint.
36874	Improved performance when using the Components panel to search for a replacement component in a Schematic.
36936	Cloned projects from the Explorer panel were incorrectly saved to the default path after specifying a local, custom path. (BC:12904)
37210	Improved performance when searching in the Manufacturer Part Search panel.
37255	Added confirmation pop-up dialog for dragging and dropping of folders in the Explorer panel to prevent accidental broken folder structure. (BC:11087, BC:12993)
37511	Improved Altium 365 performance regarding sharing permissions.
37964	Inability to place a component from the 'File-Based Libraries Search' option if 'No' was selected when asked if you would like to install the library that contained your selected component.
38137	Error occurred when saving .Cmplib file after adding part choices.
38168	Template parameter values were not applied to managed templates.
38187	'Category' and 'Type' source library parameters were not recognized by the Library Migrator when migrating to the server.
38194	Project templates shown in the Explorer panel did not appear in the Create Project dialog.
38196	Existing project files that were added to a managed template item did not appear after releasing the template to the server.
38333	Added the capability to save the 'All' library category status in the Components panel.
38384	The Components panel performance has been optimized to not generate empty conditions when none of the text in the search request string matches.
38522	Error occurred during component releasing.
38573	Where-used tab of the Explorer panel incorrectly displayed the first revision, not the latest.
38673	Exception error after attempted PCB update when Library contained a large number of Footprints.
38748	Crash or freeze while dynamic compilation collected data for validation.

Import/Export

37402	Import Wizard could not reestablish Component Links when adding Schematic and PCB docs from OrCAD and PADs to the same project.
37471	The software did not import Allegro projects with versions 17.3 and 17.4.

Version 20.1.10

Build: 176 Date: 26 May 2020

Schematic

38353	Missing duplicate designator message in the Messages panel.
38714	Parameter value incorrectly displayed in place of the parameter name.

PCB

38499	The software could freeze when changing PCB Editor preferences.
38737	Regions did not account for ODB++ fabrication output when generated for masks layer.

Draftsman

37877	Polygon pour cutouts did not display after PDF output.
38432	Transmission lines were sometimes missing when a substack was added to the Layer Stack Manager.

Platform

37915	Crash after connecting or reconnecting to a Workspace.
38237	Last connected workspace not being restored when restarting software.
38371	Improved performance time when selecting one by one component in a schematic.
38578	Crash when closing the software after loading certain preferences. (BC:13573)

Data Management

37570	'Project' folder changed to a 'Generic' folder after viewing the Project folder's permissions.
38141	Draftsman documents did not open when accessed from a project template. (BC:13525)
38170	Fixed regression that caused no part request folder to appear in the Explorer panel after signing into the workspace.
38202	Component Revision ID parameter value was missing in the Explorer panel.
38258	'Navigate to' option in the Explorer panel stated 'There are no items in this folder', even though the item existed.
38378	Error when releasing an updated component.
38396	Crash when adding part choices in the Components panel.
38431	Parameter and Comment font color defined in a library was not used when placing components on a schematic.
38475	Sorting by the Values column of the Explorer panel was incorrect.
38535	Error during Integrated Library compilation, resulting in an unsuccessful library creation. (BC:13580)
38639	Error when releasing a component after adding a new model.
38650	Exception error when releasing an updated component in the Single Component Editor.
38671	'Object accessed after being destroyed' error appeared when closing documents that have been generated by the project releaser.
38736	Adding object parameters for a Device Sheet, Sheet Symbol, Pin, or Port caused a crash.

BOM

37907

Exception error when the project file is modified outside of the software and a BOM document was open

Version 20.1.8

Build: 145 Date: 14 May 2020

Platform

37730	Fixed issue that caused Altium Designer to reconnect to a server every few minutes, which rendered UI functionality to be locked until the reconnection was completed.
38372	Fixed regression that caused an error to occur when using the 'Show in Explorer' command.
38448	Resolved an issue with updating index data after moving an Item in the Vault Explorer Classic View.
38469	Fixed issue that caused a crash after validating the project then moving a component.

Data Management

38471

Fixed an issue that caused the name of the saved copy of the PCB or SCH document to display as the tab rather than its original name.

Version 20.1.7

Build: 139 Date: 1 May 2020

Schematic

32458	Fixed issue that caused a crash when Ctrl+W was used twice.
34880	Fixed issue that caused suppressed violations to not be reported if the 'Report Suppressed Violations in Message Panel' option was enabled in the Messages panel. (BC:12706)
35644	Fixed issue that caused schematic to crash after extended periods of time.
35858	Added ability to add the Creepage Distance design rule to a Schematic document.
36001	Fixed issue that caused Net Labels to become misaligned from the grid when dragging wires.
36002	Fixed regression that caused font size to change during inline editing in the Text object. (BC:12873)
36055	Fixed issue that caused alignment of negation of pin names to display incorrectly for specific fonts. (BC:12991)
36081	Fixed regression that caused transparent geometric shapes to be printed as solid, rather than transparent shapes, when exported to PDF file format. (BC:12555 & BC:13051)
36082	Fixed issue that caused the Designator/Comment properties to not automatically update the schematic library document after editing the properties in the Properties panel.
36109	Updated the dynamic compiler to better handle project compilation and memory management when multiple projects are opened.
36123	Fixed regression that caused transparency levels to display incorrectly.
36168	Fixed issue that caused text and text frames to not center justify when there are tabs in the text.
36264	Fixed an issue where the Compiler was incorrectly reporting duplicate net names during Validation.
36267	Fixed an issue with the schematic Annotate dialog, where the right-click Order By Project Order command did not work. (BC:12964)
36445	Fixed issue where the Print Selection control in the Print Configuration resulted in a blank document.
36482	Fixed regression that caused validation errors to occur when using repeat functions and differential pair buses on Schematic documents. (BC:12468, BC:12889)
36563	Fixed issue that caused harnesses with indirect net labeling to generate the wrong connectivity.
36585	Fixed issue that caused IEEE symbols to render improperly.
36603	Fixed an issue whereby a Device Sheet would remain in the project structure, even though the corresponding Device Sheet Symbol had been removed from the relevant schematic sheet.
36735	Fixed issue that caused empty net classes when running an ECO with a 'Parameter Set' directive assigned to a port connected to a bus or harness.
36750	Fixed issues that caused stabalizaton errors to occur in Schematic documents.
36769	Fixed issue that caused the $SheetDesignator keyword format to not be recognized during Multi-Channel configuration, causing incorrect interpretation. (BC:12796)
36797	Fixed an issue where the $SheetNumber keyword was not being used in the designator numbering during board level annotation. (BC:12710)
36895	Fixed issue that caused the dashed line for a Blanket to have square instead of rounded edges in the PDF output. (BC:12677)
37026	Fixed an issue that caused incorrect text justification in templates. (BC:12564)
37044	Fixed issue that caused incorrect, duplicate nets error messages to appear when the name of a Sheet Entry was changed.
37075	Fixed issue that caused unused managed schematic sheets to not be removed from the project after removing them.
37155	Fixed regression that caused the software to not detect output port to output port violations that were specified in the Connection Matrix. (BC:13074)
37215	Fixed regression that caused the Smart PDF dialog to hang and consume large quantities of CPU power when only some, rather than all, Schematic files were chosen to be generated.
37264	Fixed issue that caused selected objects to disappear when moving them using keyboard shortcut keys. (BC:12835)
37323	Fixed regression that caused Altium Designer to hang after the Ctrl+C or Ctrl+X keyboard shortcuts were used following the use of the 'Add Template to Clipboard' command in the Schematic Library editor. (BC:13081)
37458	Fixed an issue that caused project parameters to not carry over to sheet symbols correctly. (BC:13133)
37463	Fixed an issue that caused performance degradation when selecting objects in a schematic document.
37689	Fixed an issue that caused the up/down hierarchy to not work when navigating between documents. (BC:12907)
37800	Fixed regression that caused the Bill of Materials (BOM) report generated during the Project Releaser process to display incorrect Physical Designators when Dynamic Compilation was enabled. (BC:13302)
37994	Fixed issue that caused an 'index out of range' error to occur when some components were placed in a Schematic document and updated into a PCB document.
38007	Fixed regression where, when clicking on a placed hyperlink with an invalid URL from a schematic document, resulted in a software crash. (BC:12773)
38017	Fixed issue that prevented a modified/added net class or rule from being applied to more than one selected parameter set at a time. (BC:13355)
38365	Fixed custom font setting reset after library reloading.

PCB

3082	Improved performance of routing in the presence of complex shapes.
13935	Fixed regression that caused texture to be displayed on the surface adjacent to the board, rather than on the outer surface, when some components were placed on the bottom layer. (BC:11732, BC:10304)
31887	Fixed an issue that caused a crash and alteration of the PCB document while generating ODB++ files in CAMtastic.
34130	Fixed a regression in which the PcbDoc was altered when an OutJob file was generated.
34268	Fixed bug with exported DWG files that caused holes in pads to export incorrectly if the pads were originally created with offset holes from the center. (BC:8168)
34853	Fixed an issue to automatically update the reference layers in the impedance tab of the Layer Stack Manager, after adding or moving metal layers in the layer stack.
35105	Fixed an issue where pad holes were missing from the NC Drill File when the pads has a certain combination of settings.
35223	Fixed issue that caused free pads to disappear from the Solder Mask layer when viewed from a 3DPDF file.
35742	Added ability to calculate impedance profiles in the Layer Stack Manager when in multi-thread mode.
35893	Fixed issue where running a Design Rule Check on the Minimum Gap to Return Path resulted in an error.
36132	Fixed issue that caused incorrect comparison after running the Show Differences command.
36242	Fixed an issue where interactive length tuning unions were given duplicate names, resulting in an error when the PCB file was being re-opened.
36289	Standard (No BOM) components are now included in the pick & place file, to support fiducials.
36534	Fixed issue that caused all True Type text to be deleted from mirrored embedded boards when in ODB++ format.
36535	Fixed issue that caused the ODB++ outline/profile layer to revert to 'Board Outline' after 'Mechanical Layer 17' was selected as the desired layer.
36536	Fixed issue that caused ODB++ outputs to not assign net information to free pads.
36539	Fixed issue that caused the Polygon thermal relief graphic to not overlap the intended object, nor display the generated ODB++ output correctly.
36541	Added options for selecting units of measurement in ODB++ Setup.
36542	Added options for selecting the type of output files in ODB++ Setup (BC:8262)
36545	Fixed regression that did not allow certain layers to be removed or added in the Layer Stack Manager.
36547	Fixed an issue that caused a comment of a component that refers to a project parameter to be displayed as a literal string in the PCB.
36559	Fixed an issue that caused keyboard arrows to not work when dragging selected tracks. (BC:12797)
36600	Fixed issue that would not allow a change in footprints for multiple components when the Properties panel is floating rather than docked. (BC:12717)
36663	Fixed issue that caused PCB Library footprints to sort in incorrect alpha-numeric order. (BC:12579)
36921	Fixed issue that caused the Gerber output for an OutJob file to truncate the penultimate period (.) within the generated file name if the file name contained multiple periods.
36945	Fixed an issue that caused PDF to not show component parameters if Schematic Prints is not set as the first PDF to be generated. (BC:3707)
36982	Fixed regression that caused the cursor to not snap to the center of a pad when prompted. (BC:12655)
37013	Component parameter support has been added to the ODB++ component exporter.
37069	Fixed regression that caused no error to be shown after running the Design Rules Checker (DRC) on pasted objects.
37103	Fixed issue that caused Strings in a PCBLib file to jump to the absolute origin. (BC:12933)
37180	Fixed a regression that caused generated teardrops to behave incorrectly for certain objects.
37230	Fixed issue that caused a crash when dragging trace segments in the PCB. (BC:13055)
37274	Fixed issue that caused incorrect xSignal delay values.
37404	Fixed a regression that caused incorrect justification for PCB printouts when TrueType font was enabled. (BC:13025, BC:13253)
37680	Teardrops no longer impact on the delay calculations for the route signal length.
37741	Fixed an issue that caused an error when managed project changes were committed but not pushed to a server for a time.
37822	Fixed regression that caused Altium Designer to display an error message regarding there being 'no top level document to compare' to after using the 'Import Changes From Source Schematics' command.
37840	A .SameCoordinates file attribute has been added to the Gerber Output.
37844	Fixed a Gerber bug where a non-circular aperture was selected for drawing an arc.
37998	Fixed regression that caused selecting connected copper option to not select polygons.

Draftsman

32323	Fixed regression where merging cells in a table resulted in an error message.
34370	Fixed issue that caused the Step Model to crash when changes were imported from within a Draftsman document.
36439	Improved the display of hole tolerances in the Drill Table, which now displays: empty fields as blank (instead of None); and +ve and -ve zero values. (BC:11213)
36442	Fixed bug that caused Parameters to not be transferred properly when a file was created from a Draftsman template. (BC:11424)
36473	Improved grid snapping for all Draftsman objects. (BC:8351)
36474	Added dimensioning to the centers of arc segments and quadrants of circles. (BC:12012)
36503	Added support for variants for Board Realistic View. (BC:11977)
36505	The 'All Variants' option featured in Draftsman documents has been renamed to 'No Variants' to reflect the fact that the two options function the same and to provide consistency between Draftsman documents and the Projects panel. ( BC:11529)
36508	Added ability to snap to middle of line (BC:7663).
36511	Added ability to use Schematic Sheet templates within Draftsman documents (BC:6630)
36512	Rectangular shape option has been added to the Board Detail View. (BC:8271)
36513	Added ability to alter the Symbol Size of selected symbols within the Drill Symbol Configurations dialog (BC:11304).
36514	The same Drill Table symbols that are available in the PCB editor can now be used in the Draftsman editor to ensure consistency, courtesy of the new Sync symbols with PCB option. (BC:8197)
36515	The SVG file format has been added to Draftsman documents (BC:10014)
36516	The ability to snap dimensions to component references has been added to the Draftsman editor. (BC:7031)
36517	Added current grid units to status bar.
36518	Added multi-selection capability when dragging a vertex in the Draftsman editor.
36521	Added relative values to Snap Distance for document options.
36522	Added "New" command to insert or add a new sheet (BC:8131)
36809	Added board size information to document parameters (BC:7482)
36842	Fixed issue where the Realistic View was not demonstrated properly for rigid-flex designs.
36843	Fixed issue where Assembly View did not adhere to the Document Variant Settings.
37016	Server-side Schematic sheet templates are now available in Draftsman. (BC:6630)
37120	Fixed issue that caused the zoom function to not work as intended within Draftsman and Multi-board Schematic editors when a display scale of more than 100% was used on a 4K monitor. (BC:12233)
38099	Fixed issue that did not allow edits to cloned managed Draftsman templates.

Platform

32826	Fixed issue that caused the autosave function to run multiple times on library files during the first backup after manually saving, depending on the quantity of projects that use the same library file.
35540	Fixed an issue that caused Altium Designer to not minimize when the task icon was clicked from the task bar.
35734	The background color present in the 3D preview featured in the Components mode of the Properties panel has been changed to grey to contrast black-colored components.
36059	Fixed an issue that caused high CPU usage after using the Components panel.
36061	Fixed issue that caused users to be using several licenses at once when the 'Sign in automatically' option was checked, when they should have only been utilizing one license at a time.
36177	Configured and executed component data synchronization from flat table sources (dblib, csv, ODBC) for Concord Pro and NEXUS.
36223	Fixed issue that caused zoom and highlighting features to not work properly for some objects from within a generated PDF.
36642	Fixed an issue that caused a crash after opening the Find Similar Objects dialog when a script is installed using the Scripting System - Global Projects page of the Preferences dialog.
36741	Fixed issue that caused the entire text typed in the port name to be deleted during typing if the cursor was positioned at the beginning or end of the text.
36965	Fixed an issue where performing the SVN function 'Compare with Head' would result in an incorrect project structure being displayed in the Projects panel. (BC:12882)
36972	Fixed issue that caused the Aperture Wizard dialog to be incorrectly resized.
37091	The Share dialog has been added, allowing you to share your design projects with others, directly from within the software
37348	Redesigned the user login and connections drop-downs.
37381	Added ability to share a project on any server without additional validation dialogs when viewing and editing.
37499	Fixed bug that caused the tab of the active panel to not show as active.
37532	Added ability to invite team members from your workspace to edit selected projects.
37551	Fixed an issue with opening a project from a cloud-based workspace through a proxy server.
37734	The Storage Manager, Messages and Output panels are now hidden by default.
37903	Improved experience when starting Altium Designer for the first time after installation including automatic log-in to AltiumLive and choice of appropriate license.
38066	Updated the connection and authorization processes to reduce the software start-up time.

Data Management

35951	The cache folder on the Data Management - SVN Libraries page of the Preferences dialog is now included when saving preferences to file (*.DXPPrf).
36010	Fixed issue that caused links within the Components mode of the Properties panel to not disappear after being deleted until the Properties panel was reopened.
36034	Improved performance optimization for the Library Migrator.
36165	A new option has been added to the Advanced Settings dialog - Explorer.ShowSystemFolders. With this option enabled, system folders will be visible for all connected servers when browsing server content through the Explorer panel.
36218	Fixed an issue that caused the 'Sign in' dialog to open again after clicking Sign In then accessing servers/workspaces you can connect to from the user login drop-down.
36276	Fixed an issue where the Single Component Editor did not support a 2-level revision naming scheme, giving a duplicate revision ID error after editing and re-releasing the component.
36291	Improved Components panel caching behavior to only present cached components from currently connected server(s).
36638	Fixed an issue that caused the location and visibility of parameters to not update when the 'Preserve parameter locations/visibility' options were disabled in the Update From Library dialog.
37116	Fixed an issue whereby signing in to https servers would not allow certain plugins to work in the software if the certificate was self-signed.
37119	Fixed performance degradation issue with the Item Manager.
37173	Improved performance time when accessing the Create Project dialog.
37275	Ability to activate the Altium 365 Workspace for a company from within Altium Designer.
37433	Fixed an issue that caused an error when committing a project to version control
37436	Fixed regression that caused print settings to be lost from the original template after the report was generated.
37646	Fixed regression that caused an erroring reading 'Unrecognized library type' to appear after an exported .IntLib file was installed in the Components panel.
37834	Fixed issue that caused the filter in the Components panel to not display all available values.

BOM

36793

Fixed issue that caused Excel macros in *.XLSM or *.XLTM to be removed when exporting. (BC:12723)

Layer Stack Manager

36954

Fixed issue that caused newly added material to not be updated in the Altium Material Library dialog when 'Update' was selected.

Import/Export

33952	The KiCAD Importer has been added to Altium Designer. (BC:6199)
35034	Fixed an issue that would cause an Access Violation while importing a specific CADSTAR PCB file.
35035	Fixed an issue that caused CADSTAR schematics to import incorrectly.
35036	Fixed an issue with the P-CAD importer that would cause a List Index Out of Bounds while importing a specific PCB file.
35299	Fixed issue that caused objects to be displayed incorrectly when importing CADStar projects.
35303	Fixed issue that caused backslashes to incorrectly appear before the first character when importing a CADStar project that contained negation over net names.
36128	Fixed an issue that caused vias and pads to not import when importing P-CAD designs.
36278	Fixed issue that caused DxDesigner to import components incorrectly. (BC:12361)
36737	Added ability to select specified layers when exporting to AutoCAD. (BC:6287)

Output

37839

A .FilePolarity attribute has been added to the Gerber Output

Version 20.0.14

Build: 345 Date: 14 April 2020

Platform

37551

Fixed an issue with opening a project from a cloud-based workspace through a proxy server.

Schematic

37319	Fixed issue that caused concatenation of parameters to be interpreted incorrectly by the BOM and PCB for components in the project hierarchy (BC:12806, BC:12884).
37451	Fixed issue that caused performance degradation when placing wires on a Schematic sheet.
37456	Fixed regression that caused the software to hang and display an empty Messages panel during project verification.
37484	Added option to disable anti-aliased rendering in Schematic (BC:12419).

PCB

35521	Fixed issue whereby pasted selections containing primitives connected to different nets were assigned suboptimal net names.
36287	Fixed an issue where a specific polygon would cause an access violation when repoured (BC:12606).
37037	Fixed a Division by zero exception that could occur during track sliding.
37331	Fixed issue that caused the 3D model to not update when the variant was switched in the Embedded Board Array.

Simulation

37431

Fixed crashes in Temperature, Parametric Sweep, and Monte-Carlo Analysis caused by invalid memory allocation.

Version 20.0.13

Build: 296 Date: 25 February 2020

Schematic

36578	Fixed issue that caused access errors or no function at all to occur when using the Show Physical Differences command. (BC:12901)
32458	Fixed issue that caused a crash when Ctrl+W was used twice. (BC:12756)

PCB

36750	Fixed issue that caused concatenation of special strings to incorrectly interpret component parameters within PCB and BOM documents. (BC:12884)
37147	Fixed issue that caused an access violation to occur in the PCB editor when zooming into a placed Via or Pad.

Platform

37094

Fixed issue that caused the platform to hang and cease function after attempting to use the Project Releaser process.

Version 20.0.12

Build: 288 Date: 14 February 2020

Schematic

35872	Fixed regression that caused the Schematic Sheet to become dimmed when hovering over primitives (except for sheet symbols and device sheets) (BC:12846).
36112	Fixed issue that caused lengthy performance loading times when loading Database libraries.
36113	Fixed regression that caused a schematic sheet to be non-responsive when the SCH List panel was open.
36116	Fixed an issue that caused power ports to not be displayed with channel post-fixes on compiled tabs when the project is set to Strict Hierarchical (Sheet entry <-> port connections, power ports local) on the Options tab of the Project Options dialog.
36555	Fixed regression that caused a deleted managed sheet to display in the project hierarchy in the Projects panel rather than in Free Documents.
36593	Added new 'Update On Project' command to the Port Cross Reference menu to update cross references of all schematic documents from within the targeted project that have changed (BC:7135).
36637	Fixed regression that caused the 'Do Not Change Zoom Between Components' option to render texts in the Symbol Editor in the incorrect position when enabled (BC:12429& 12489 ).

PCB

36776	Fixed regression that caused a delay after moving vias when polygons are unshelved.
36920	A new 'Ignore internal layers' option has been added to the Creepage rule within the PCB Rules and Constraints Editor dialog to ensure the rule may only be applied to outer layers (BC:12656).

BOM

36747	Fixed issue that caused values in the ActiveBom to not be calculated when special string interpreters are used (BC:12806).
36893	Fixed issue that caused incorrect parameter values to be displayed in the BOMDoc.

Draftsman

36648

Fixed issue that did not allow Drill Tables and Layer Stack Legends to be added to Draftsman document templates.

Simulation

36704

Fixed regression that caused an error when using the Temperature parameter as the primary variable in DC sweep analysis (BC:12772).

Version 20.0.11

Build: 256 Date: 28 January 2020

Schematic

35929	Fixed issue that caused an error when dragging a component from the Components panel to a schematic document. (BC:12578)
35952	Fixed issue that caused invalid generated messages when Validating a project for each Net contained in Harnesses.
35979	Fixed regression that caused placed components covered by a Compile Mask to still be checked when compiling a project.
35989	Fixed an issue whereby the number of created channels was not equal to the total declared number of channels in the separate REPEAT declarations, when two instances of the same sheet symbol were used.
36022	Fixed issue that caused locked designators to be reset in the Properties panel.
36038	Fixed an issue whereby errors that existed on a project and being detected in Altium Designer 19, were not being detected in Altium Designer 20.
36095	Fixed regression that caused certain fonts to shift vertically in a manner that covered the wires they were placed above.
36117	Fixed an issue whereby pins were being removed from nets erroneously during ECO.
36135	Fixed an issue where certain SVG image files could not be placed on a schematic.
36189	Fixed bug that caused harness sheet entries to report violations as harness objects.
36235	Fixed an issue where opening a multichannel design created in an older version would not respect the Lock Physical Designator option, resulting in changes to component designations. (BC:12498, BC:12500)
36259	Fixed an issue with multichannel designs where the compiler was not resolving and displaying the physical net names correctly, in accordance with the selected net naming options.
36360	Fixed an issue where schematic junctions would render as hollow circles when printing in black and white mode.
36456	Fixed issue that caused Parameter Manager to incorrectly display Parameter values.

PCB

35542	Fixed issue that caused visibility settings to be reset in the View Configuration panel after switching from 2D to 3D and/or saving and reopening the PCB.
35863	Fixed an issue that required the object justification button within the Properties panel to be pressed numerous times in order to select the desired justification, rather than requiring a single click.
36048	Fixed issue that would not allow a change to units in the PCB Modal Properties dialog. (BC:12428)
36295	Fixed an issue where defining a pad propagation delay resulted in an incorrect total propagation delay for an xSignal.
36311	Fixed issue that caused Tuning tool to not use Via delay for matching.
36386	Fixed issue where the track width values displayed in the Layer Stack Manager were slightly different from the values displayed in the PCB design rules.
36387	Fixed issue that caused incorrect rounding errors for Impedance profile in the Layer Stack Manager.
36449	Fixed issue that caused text position to move when using Text Justification in a PCBLIB document when saving and reopening. (BC:12642)
36450	Fixed issue that would not allow selection of rotated text in PCB documents when using Text Justification. (BC: 12642)

Other

36527	Platform: Fixed issue that caused the Scripting system to incorrectly handle cases when function returns set. (BC:12177)
36590	Platform: Updated Japanese localization.
36087	Data Management: Added 'Content Vault replaced with Manufacturer Part Search' dialog that redirects users to the Manufacturer Part Search panel.
36122	Data Management: Fixed an issue with alpha-numeric sorting in the Components panel.
36262	Data Management: Fixed an issue where the Manufacturer Part Search panel could not be used because of an issue with user access authorization.
36121	SIM: Remove generation and displaying of empty *.sim files after running the simulation
36231	SIM: Fixed bug that caused current and power probe data to not be utilized correctly by the simulation engine.
36467	Draftsman: Fixed issue where the component reference marker was not shown for a BGA with alpha-numeric pad numbering. (BC:8576)

Version 20.0.10

Build: 225 Date: 24 December 2019

Schematic

36077	Resolved an issue where entering Note text that wrapped to multiple lines (via the modal dialog) would lock up the application, requiring the Task Manager to shut it down.
35887	Fixed regression that caused the inability to annotate with preassigned start indexes for designators when performing an Engineering Change Order.
35820	Fixed regression that caused designator values and default component prefixes to overlap, rather than display in separate positions, after using the Reset Schematic Designator command.
35923	Fixed issue that ignored values that were created as combined values within Sheet Symbol parameters.
36019	Fixed issue that caused software to crash upon the opening or creation of a schematic on 4K screens and higher
35565	Fixed issue that caused Port Cross References texts to not be properly positioned until clicked on.
35725	Fixed issue that caused parameter values to be transferred incorrectly following the execution of an Engineering Change Order (ECO).
34582	Fixed issue that caused net colors to be wrongfully assigned after Script execution with DDM (Dynamic Data Model) enabled.
35849	Fixed issue that caused incorrect Parameter values to be displayed on the compiled tab of the schematic for the not fitted part.
35823	Fixed issue that caused directly placing a No ERC object to a floating net label to be ignored, resulting in a Floating Net Label warning after compilation.
35880	Fixed issue that caused components set as mechanical to be checked for electrical properties and errors.
35202	Fixed issue that caused component movement to slow significantly within certain projects if the design enabled Cross Select mode and had a schematic document open.
35874	Fixed issue that caused an invalid dash size to appear within a PDF document when changing line style from 'dashed' to 'dotted' in a schematic document.
35857	Fixed issue that caused a rule inconsistency to occur between object properties displayed in a modal dialogs and properties panel modes.
34903	Fixed issue that caused a delay in Altium Designer and Altium NEXUS to occur when opening sheets in some large projects.
35825	Fixed an issue with "Duplicate Net Names" ERC check.

Platform

35916	Fixed issue that caused the expression 'If Nil = ObjectVariable' to cease functioning within the scripting system.
36009	Fixed issue that caused problems opening generic documents when new Documentation Outputs for Schematic Prints and PCB print was created.
35840	Fixed issue that caused invalid violations when loading and transferring alternate parts from the managed content server.
35737	Fixed issue that caused ECO to not transfer nets for alternate parts when the pin designator was different from the original part pins.
34664	Added ability to still use Altium Designer in Viewer mode, when signed in to AltiumLive account, but not using an active license. Features permitted to be used are the same as when using an Altium Designer Viewer license. (BC:1027)

PCB

35819	Fixed regression where Tented checkboxes were unavailable for enabling in the Properties panel for Via Stitching and Via Shielding (BC:12491).
35753	Fixed regression that caused polygons to not appear in the Polygon manager after creating a new one using the Board Outline tool.
35864	Fixed regression that caused extra, unnecessary words to appear within the Polygon Manager rules expression within the Polygon Pour Manager.
36012	Fixed regression that caused Altium Designer to stop working in Windows 7 when opening the Layer Stack Manager for the first time in a specific PCB document.
35915	Fixed issue that caused the Propagation delay of an Accordion object to be incorrectly displayed as "0" in the Properties panel.

Other

35855	PDNA: Fixed previously broken possibility to edit pins in PDN Analyzer
35822	Importers/Exporters: Fixed regression that caused Schematic sheet to not import when attached Eagle libraries have been imported.
35362	Importers/Exporters: Fixed an issue where PCAD Import does not extract components.
36257	CAMtastic: Fixed issue where it was not possible to re-open ODB++ files that were exported from CAMtastic when PCB contains slots.

Version 20.0.9

Build: 164 Date: 2 December 2019

Platform

30546	Improved handling of network disconnection and latency issues between design client and server.
31167	Fixed an issue that caused alternate parts to not be taken into account after 3D STEP generation. (BC:2654)
31797	Added support for proxy server authentication.
31921	Updated Properties panel so main tabs remain visible while scrolling.
32240	Fixed regression that caused crash when Preferences dialog was opened and left idle.
32351	Fixed scripting FontManager interface bug that caused Undeclared Identifier errors when running scripts that accessed fonts. (BC:10957)
32808	Fixed bug where double-clicking on an IntLib file would open it in the running software instance and also in a new software instance. (BC:9671)
32820	Fixed issue where Panel GUI customizations were not being restored after the software session was closed and restarted. (BC: 3492)
32873	A warning is displayed in the Messages panel when a file has been implicitly removed from the project while opening the project (to clarify the reason of the project modification for the user) (BC:10546)
32896	Added a setup option for excluding specific component parameters from being in the generated PDF. (BC:2470)
32904	Files missing from an opened project are now reported in a Messages panel list rather than a sequence of error dialogs. (BC:9313)
32906	Added 'Open All Schematic Documents' option to the Source Documents right-click menu in the Projects panel. (BC:11055)
32989	Open Project dialog now displays detailed information about the selected project when browsing Local Projects. Search bar now supports entering a local location, and includes an Up Folder navigation icon.
33222	Added an option to disable fractal mode for Panels in Advanced Settings (BC:1384).
33223	Fixed bug that caused polling for every printer driver when a project file is loaded. (BC:6980)
33462	Autocomplete functionality has been removed from Font Size property lists (BC:11591)
33467	Restored 'Multiline documents bar' option on the System - View page of the Preferences dialog. (BC:8672)
33468	The To-Do panel has been restored. (BC:8622)
33896	Restored Clipboard Panel, which can be managed in Preferences>>Advanced Options (disabled by default) (BC: 9142).
33921	Project validation checks will now correctly report missing component footprint models in the Messages panel. (BC:6066)
35005	Fixed issue that kept the Messages panel from opening automatically when ERC errors are discovered during compilation.
35272	Fixed regression where a relative Output Path in Project Options prevented the Project Releaser from generating Assembly and Fabrication outputs.
35492	Fixed an issue that caused the scripting system to incorrectly compare Object with Nil. (BC: 12177)
35670	Fixed issue that caused Net colors to not be included in the PDF Output when generated from a Fabrication Outjob file.
35774	Fixed regression issue where Exception occurred while moving Libraries inside the Project panel.

PCB

11837	Justification and Margin options were added to Text strings. The reference handle on a selected string is denoted by a small x. (BC:2176)
24358	Improved Drag Track/Arc behavior to prevent the creation of acute and right angles and self-intersections; utilize new Push-Shove.
29821	Fixed regression that caused DRC to run slowly. (BC:11604)
30620	Fixed an issue where TrueType fonts in an assembly drawing were not presenting at the same size as that text displayed in the PCB editor. (BC:10383)
30624	Fixed an issue where stacked uVias were not used correctly during a layer change while routing a differential pair.
30627	Fixed performance regression issue in Find Similar Objects function.
30655	Improved performance for moving components in PCB Editor.
30824	Added new Creepage design rule which checks the creepage distance between the specified signals across the board surface, through unplated holes and cutouts, and around the board edge. (BC:553)
30965	New Return Path design rule added to the High Speed rules category. Checks for a continuous return path along the reference layer(s) defined for the chosen Impedance Profile. Return paths can be created from Regions, Polygons and Plane layers. (BC:5984)
31538	Added support for time-based (propagation delay) routing, includes changes to: specify the delay in the Length and Matched Length design rules, and showing delay values in the PCB panel (Nets and xSignals modes, and Primitives details in Diff Pair mode) and the Properties panel (track, arc, pad, via object modes and the Interactive Length Tuning gauge). Via and Pad delays can be manually defined.
31171	Fixed an issue where a rotated rectangular pad which had unused mid-layer pads removed, would create an ODB++ error when loaded into the Valor ODB++ Viewer.
31613	Added the ability to switch between states (All ON, All OFF, Last ON) in the Selection Filter, Snapping Objects, and View Configuration panel.
31919	Added new Net link for Properties panel to provide dedicated access to PCB net properties.
31923	Removed redundant Apply button used for confirming a change in Polygon Pour properties.
32092	Fixed issue where a board outline could not be defined from a closed tracks/arcs shape derived from an existing Board Shape.
32095	Implemented dual Lock state icon mode in Properties panel, which indicates that selected objects have different Lock states, for all lockable objects in PCB documents and libraries.
32258	Interactive router with arcs and Any Angle segments is now able to push obstructing traces.
32368	Fixed an issue where the Signal Length was not being calculated for a net, when that net passed through a plane layer.
32583	Added option "Pad Entry Stability" to Interactive Routing Panel Properties which controls how much freedom is allowed for automation in changing the existing Pad Entries (BC:10582)
32602	Fixed an issue that caused a catastrophic failure when placing a Layer Stack Table if another PCB document with an opened Layer Stack Manager was closed before placing the table.
32609	Fixed snapping issue that prevented placed Dimensions locking to intended locations.
32623	Move Component with re-route now remembers the last used net-line mode (BC:10685)
32705	Fixed regression bug that prevented objects placed on a mechanical layer Route Tool Path from displaying in the 3D View.
32761	Fixed bug that caused graphic artifacts to display on a group of pads that have been copy-pasted into another PCB document.
32779	Fixed an issue where the .VersionControl_PrjFolderRevNumber special string was not being interpreted when the PCB was part of an embedded board array which was under version control. (BC:71)
32838	Added the option to show scrollbars in a PCB. (BC:4032)
32839	Fixed bug where the last used value in the Rotation Angle dialog was not being retained for the next application. (BC:4942)
32895	Added new 'ModifiedDate' and 'ModifiedTime' special string options for timestamping modified PCB documents. (BC:1541)
32902	Added the ability to enter relative (Delta offset) distances in the Jump To Location feature dialog. (BC:8492)
32944	Fixed issue in the Layer Stack Manager where the '=' character in an Impedance Profile caused a validation error.
32947	Added 'Thermal Relief Overrides' option to the Pad(s) Attributes region of the Component(s) Update Options dialog. (BC:11377)
32973	Fixed an exception that sometimes occurred in RoutingEntry.dll during Interactive Routing in Push mode with Via Pushing allowed, near differential pair vias. (BC:11398)
33053	Fixed issue where PCB Library panel UI settings were not being retained between sessions.
33224	Added 'Tented' option for SolderMaskExpansion Design Rule. (BC:923)
33230	Restored the ability to perform a layer change in the PCB List panel. (BC:10970)
33280	Added support for Margin and Text Offset borders for all types of PCB text strings (except BarCodes).
33282	PCB component bounding box is now determined by the Courtyard layer (BC:1266)
33284	Restored a feature that adds a transparency value to the Object Visibility table, allowing users to define transparency for selected primitives on all layers. (BC:9097)
33306	Fixed an issue where it was not possible to select multiple pads and then enable and configure the local thermal relief setting. (BC:11477)
33392	Added tool to automatically add component designators to a Component Layer Pair of type Designator, for assembly drawing generation. New commands added to the PCB and PCB library editor Tool menu, which creates the layer pair if it does not exist. (BC:687)
33465	Improved autocomplete filter results when using Properties panel. (BC:10418)
33469	Synchronization between SCH & PCB (ECO) now correctly detects situation when SCH component doesn't have a footprint (BC:10027).
33497	Fixed a bug where when using impedance profile in Rules, if the "Layers in layerstack only" option was disabled for flexible stack, the width values became 0. (BC:11594)
33575	Implemented search in Rules and Constraints dialog (BC:10810)
33614	Removed unsupported item "Node Voltage, Supply current and Subcircuit VARs" from Analysis Setup Window. (BC:1395)
33622	Added automatic area calculation for the board and defined copper shapes to the Properties panel.
33630	Fixed bug with pre-processing of SPICE netlist documents that broke simulation launch
33679	Added Roughness properties to the Properties panel when viewing the Layer Stack document. Properties include Model Type, Surface Roughness (SR) and Roughness Factor (RF).
33745	Fixed a regression that caused all selected components, except for the first selected, within a PCB Library document to have listed coordinates of '5000', rather than the expected or entered amount.
33754	Jump To Location dialog (with the new support of relative coordinates) has been refactored to retain the last entered values where possible.
33761	Added ability to calculate and display the Area of Board. (BC:10814)
33762	Added a feature that calculates and displays the total Area of Components and Density within the Board Information section within the Properties panel.
33765	Added new Copper Area report to the Board Report dialog. This option allows to get report about copper percentage on layer. (BC:3049)
33863	Fixed a regression in which an access violation occurred in PolygonClipper.dll after changing the track width within a PCB document.
33912	Fixed bug that caused the wrong default focus field in the Properties panel (Template instead of Designator). (BC:9887)
33918	Fixed an issue when Tools>>Update from PCB Libraries displayed incorrect (swapped count) update message (BC:4116).
33983	Fixed a bug in which solder or paste mask changes did not transfer from a PCBLIB document to a PCB following an update. (BC:8897)
34034	Fixed regression that caused layers in the Pad & Via Library to not be updated correctly. (BC:11615)
34044	Fixed PCB editor messaging bug where the Autosave notification would loop indefinitely if a software licensing issue is encountered. (BC:10234)
34111	Fixed bug that did not allow coordinates with decimal places in the PCB list panel. (BC:10655)
34141	Added new 'Measure 3D Objects' feature to the PCB Library Editor to verify that 3D files for component display the correct height as defined in their datasheets. (BC:6776)
34169	Added command 'Delete Selected Unions' command to the popup menu in the PCB panel. (BC:8421)
34173	Added options to the Unused Pad Shape removal tool: Scope now includes the option 'Both' to target both pads and vias; Operation now includes the option 'Update unused' which restores then removes unused shapes. (BC:6551)
34174	Fixed option to ignore snap by holding the Ctrl key when moving PCB objects. (BC:11605)
34175	Added ability to Show or Hide net connections between selected components using the right-click Component Actions submenu. (BC:11239)
34200	Fixed bug that caused a union with 3D bodies to not move together. (BC:9519)
34205	Fixed issue where the electrical Layer Name in an ODB++ output did not match the Layer name in the Layer Stack Manager. (BC:11636)
34208	Added icon for all primitives in the Properties panel that allows you to interactively choose a net connection. (BC:595)
34209	Added the ability to lock the Polygon object in the Polygon Properties panel. (BC:8964)
34219	Added new "Skip Hidden 3D Bodies" option to the STEP and Parasolid Export Options dialogs. (BC:1531)
34238	Fixed regression bug in IPC-D-365A output generation where the incorrect syntax was used for a long net name alias (BC:11349)
34267	Fixed bug that caused errors in Layer Drawing Order. (BC:11196)
34269	Extended ability to permanently display layers in the View Configuration panel for Single Layer Mode. Implemented the same as for mechanical layers but now includes all layers. (BC:9276)
34318	Added 'Create 3D Body from Selected Primitives' command to the Tools > Convert sub-menu in a PCB Library document. (BC:11849)
34366	Added resizing capabilities to the PCB Library Footprint dialog and allowed more room for the Name field. (BC:11626)
34404	Fixed an issue whereby a column filter was not being applied as part of setting up a Pick and Place output generator (in an OutJob), if a parameter used in the filter contained a space in its name (BC:9468)
34406	Dimension objects can now be hidden using the View Configuration Object Visibility setting (BC:10277)
34471	Added 3D view of the padstack when browsing the properties of a selected Pad object through the Properties panel.
34556	Fixed an issue whereby the label for the Height field - in the Extents region of the Cartesian Grid Editor - was misaligned (BC:11900)
34575	Updated Interactive Routing mode of the Properties panel to improve usability and expose new interactive routing features, including: Hugging Style, Pad Entry Stability, and Miter and Min Arc Ratios.
34576	Updated Interactive Length Tuning and Accordion modes of the Properties panel to improve usability, now includes a Preview on/off mode that better relates the setting controls to those settings in the preview.
34577	Added a new Interactive Sliding mode to the Properties panel that displays whenever a track segment is being dragged, giving control of the available interactive route sliding options.
34661	Fixed bug where drawing primitives could not be placed on the Keepout Layer without another layer being automatically selected. (BC: 8409)
34667	Fixed an access violation when selecting Structure Classes for a particular design.
34683	Added ability to group polygon pours by layer in the Polygon Pour Manager dialog. The Pour Order list will present only those polygon pours on the same layer as the currently selected polygon pour (or first selected if multiple pours selected across different layers).
34715	Updated system text storage to Unicode (UTF-8) to ensure that text-based symbols and characters are correctly interpreted. (BC:718)
34736	Fixed regression where snapping to a Room vertex is still active after it has been disabled. (BC:11716)
34805	Fixed an issue where any action with primitives from broken differential pair resulted in an exception error.
34856	Updated the Simbeor Impedance calculator to support coplanar structures and better support asymmetric stripline structures. (BC:1302)
34864	Fixed a bug that failed to display BOM Reports following the execution of an Engineering Change Order (ECO).
34879	Routing Properties panel now appears before the process has started, so it is possible to set parameters beforehand.
35015	Interactive Tuning Properties panel now appears before the process has started, so it is possible to set parameters beforehand.
35054	Fixed bug that caused the Jump To Location command to not jump to entered location.
35094	Added a new option to the PCB Editor - General page of the Preferences dialog (Double Click Runs Interactive Properties) to either open a modal dialog or the Properties panel when editing objects using double click.
35095	Fixed bug that corrupted the Keepout Restrictions of a moved Keepout Arc when its position is restored using the Undo command. (BC:12088)
35304	Fixed regression where Update From PCB Libraries command did not display Component Footprints in the Difference Details display region.
35405	Fixed an issue where the polygon pour order was not retained when a number of polygons were copied and pasted.
35552	Fixed regression that caused pad and via objects the inability to display nets or text on the currently active Plane Layer or Non-Signal Layer in Flip Board view.
35557	Fixed issue where the Pick Net command did not work properly for different multi-selected objects.
35567	Polygon Pour mode of the Properties panel, removed the Auto Naming checkbox. The software now respects the user-defined name, or automatically names the polygon if the Name field is empty.
35594	Removed auto-completion for Routing width in the Properties panel.
35599	Fixed an issue with the layer drawing order where mechanical layers 17 and higher would not display in front of other layers when configured to do so.
35602	The Follow Mouse Trail option within the PCB Editor - Interactive Router preferences has been retired.
35603	Fixed an exception that would occur when a PCB object's layer was changed, and then the Select Outside Area command was used to select it.
35617	Fixed issue that caused Assertion failure during creepage distance rule check.
35667	Fixed issue that displayed a full circle violation, rather than a violation that should have been placed around the edge of an Arc, after using the Design Rule Checker in some projects.
35705	Fixed issue that caused the value for Length in the Net Information section of the Differential Pair Routing Properties panel to always display 'N/A' rather than the genuine length.
35733	Fixed an issue where 'Drag PCB' command from the Active bar or 'Edit' menu does not work for traces.
35783	Fixed an issue where Multi-Layer drawing order is not respected when promoting Mechanical layer above Current layer.
35848	Fixed an issue where the component designator position was wrong after component rotation or location changes.
35888	Resolved an issue where the "Choose Component" dialog does not occur during the "Move Component" PCB command.

Schematic

27346	Fixed regression where a Blanket with Parameter Set enclosing a Sheet Symbol caused the subsheet Parameter Sets and No ERC to be ignored.
30922	The Schematic editor graphics rendering has been upgraded to now use DirectX for increased performance and quality.
31610	Fixed an issue where batch replacement of selected components (via the Design Item ID ellipsis) would fail, with the error message "Could not find component in available libraries", even though the component was available.
32238	Fixed a bug that allowed users to only change the Design Item ID value of the last selected component, although various components were selected to be edited jointly.
32405	Part Choices section has been added to the Properties Panel for schematic components.
32418	Fixed issue that caused a crash while dragging the SCHLIB panel from the right monitor to the left monitor.
32637	Update from schematic libraries no longer resets the footprint to the default (BC:1846 and BC:11261)
32762	Component parts are no longer randomly swapped when annotating. (BC:1137)
32809	Fixed issue where configured net colors were not shown across all sheets due to case sensitivity. (BC:8905)
32840	Fixed bug that caused a warning for every Part selected when multiple parts on the schematic are selected, the Design Item ID is manually changed, and there are no applicable components in available libraries. (BC:4991)
32898	Added an 'Update Selected From Libraries' option so that only preselected components will be compared to libraries, rather than the slower process of first comparing all project components. (BC:4560)
32900	Added the ability to hide schematic editor scroll bars. (BC:7370)
33450	Fixed bug that caused a crash when attempting to modify the pin parameters from the SCHLIB List Panel.
33458	Fixed an issue whereby a net label could not be modified when changing the case of one or more characters in the name
33697	Schematic & SchLib editor Properties panel have been redesigned to improve usability and performance.
33784	Fixed bug where a schematic NoERC marker would create a net connection when placed on crossing wires. (BC:7766)
33785	Restored the ability to define parameters within the Parameter Set Properties panel.
33914	Fixed bug where the position and visibility of the component designator, comment and other parameters were reset to default after changing the Design Item ID. Previously changing the Design ID acted as a Full Replacement, now this method behaves like Update from Library (BC:4293).
33979	Fixed issue that used the autocomplete function in the "Find Text" schematic tool. (BC:6065)
33980	Added the UI.AutoComplete option to the Advanced Settings dialog, disable the option to switch off autocomplete. (BC:7301)
33984	Added ability to interactively navigate by ports, sheet entries, sheet symbols and off-sheet connectors for Schematic PDFs. (BC:2273)
34107	Added ability to rotate a schematic object and access its properties when the object is being dragged. (BC:7196)
34113	Fixed issue that caused a defined-by-blanket Net Class to not be transferred to PCB.
34140	Fixed a bug that caused designators to fail to reset within a Schematic document when copying components by using the Shift+Drag feature. (BC:6010)
34316	Added a new option (Preferences>>Graphical Editing) to either open a modal dialog or the Properties Panel when editing objects using double click.
34363	When selecting to use an alternate part in the Variant Management dialog, the default footprint is now used, rather than leaving the field empty.
34652	Fixed compiler issue that falsely reported an ERC violation that Nets contain multiple Input Ports.
34654	Fixed bug that caused incorrect data in the Engineering Change Order.
34658	Improved the performance of wire/bus optimization, which was causing an unreasonable delay during component dragging.
34682	Fixed bug that caused unwanted rooms to be generated when updating using the Update PCB command.
34705	Fixed bug that caused the compiler to not create compile tabs for device sheets.
34706	Fixed bug that caused up/down hierarchy regarding buses to not work properly.
34789	Fixed bug that caused a crash when adding or editing a variant.
34881	Fixed bug that caused Up/Down Hierarchy to not work properly with ports and sheet entries.
34943	Fixed bug that caused high memory usage and performance degradation when performing some schematic functions.
34976	Restored the ability to access and manage the Unique ID of schematic objects in Properties Panel. (BC:8686)
34977	The Unique IDs of schematic Directives are now reset to prevent duplicates when copied and pasted.
35024	Fixed bug that caused the ECO process to work incorrectly when variants have the same schematic symbols and PCB footprints but different 3D models.
35028	Fixed regression where active cross-probing from the Details section of the Messages panel did not function.
35029	Fixed an exception that occurred when opening a specific schematic sheet.
35033	Refined the modal dialogs (that open on double-click) based on user-feedback.
35117	Fixed schematic net coloring bug that caused connected Nets to be colored rather than the selected Net. (BC:11497)
35121	Fixed issue that caused hierarchical structures to not apply to projects after compiling was finished due to Sheet Symbol objects that didn't have connectivity.
35211	Compile PCB Project command changed to Validate PCB Project, since the introduction of the Dynamic Compiler means this command now only performs an ERC.
35212	Fixed a regression where the ERC incorrectly flagged errors for Sheet Entries being used in a Signal Harness.
35285	Fixed an issue where the Dynamic Compiler caused the Board Level Annotation feature to incorrectly annotate the components on a test schematic.
35350	Fixed compiler mask issue that did not detect changes after resizing or re-positioning.
35395	Fixed slow performance during placing wire/bus/harness in Schematic, if templates path refers network server.
35525	Fixed issue that caused symbols to become unlinked when dragging Designators from a Schematic Symbol.
35526	Fixed regression where Font Selection was not available in the Properties panel for Harness Connectors and Sheet Symbols.
35541	Fixed issue that caused graphic to not update correctly when pasting a component in the Schematic Library Editor.
35565	Fixed issue that caused Port Cross References texts to not be properly positioned until clicked on.
35566	Fixed issue where modified fonts were not updated correctly when using the Update Schematic command.
35569	Fixed a regression in which the ability to select multiple Parameter Set objects was not working within the Schematic and Schematic Library editors.
35576	Fixed an issue in which the Text Frame dashed outline was missing during placement.
35582	Fixed issue that caused Invalid Dash Style in PDF output.
35676	Fixed issue that caused a line object to be incorrectly marked and indicated when selected.
35703	Fixed issue that failed to detect changes in the Schematic documents if several pins were placed over each other in a Schematic Symbol object until after the PCB document was updated, and Altium Designer was restarted.
35704	Fixed issue that caused a Schematic document with the ' µ' character in the filename the inability to appear as a child document.
35767	Fixed an issue when sub - grid lines sometimes disappear.
35778	Fixed an issue with incorrect PDF output for a rounded rectangle with a radius larger than its size.
35847	Fixed an issue where the E value is interpreted when using Parameter Value as a reference in another Parameter.
35856	Fixed an issue where 'dragging' schematic symbol with wires left NetLabels behind.
35870	Fixed an issue that caused exception, which occurred while generation Smart PDF with default options.

Data Management

24225	Fixed an issue where it would not be possible to release a project after BOM generation, if the BOM used a custom template.
27574	Added the ability to send a symbol or footprint directly to the active server, from the open SchLib or PcbLib. This is possible when only a single symbol or footprint is present in the open library document. If the library contains more than one symbol/footprint, you will be prompted to use the Library Migrator.
28538	Fixed an issue whereby the wrong lifecycle type was being shown for a released item, after changes to the Content Type settings had been made for lifecycle definitions with respect to that item type.
31602	Fixed an issue where Component Types could be edited by all users, they are now restricted to users with relevant permissions.
31833	Fixed an issue where managed component parameter visibility was not being applied when the component was placed via the Components panel.
31839	Fixed issue where the Remove From Version Control function does not behave as expected for a Git server repository.
31849	Fixed an issue in the Explorer panel where columns containing numerical values were not sorting with respect to their value and units.
32083	Fixed backward compatibility issue that caused Description parameter values to be missing in the Part Search feature of software versions prior to AD19.0.
32085	Fixed issue where Find Similar Components feature did not correctly return components specified by same Revision State.
32129	Fixed a regression whereby system parameters such as 'Revision ID', Item ID', and 'Name' could not be used as suggested keywords, when adding part choices through the Manufacturer Part Search dialog (when accessed from the Explorer or Components panels).
32270	Fixed regression where BOM is not available in Bookmarks section of a PDF document generated by SmartPDF from a schematic document. (BC:11111 and BC: 11199)
32343	Fixed an issue whereby the total available stock for a manufacturer part was being incorrectly calculated and presented in the ActiveBom (BomDoc), in comparison to viewing such data through the Manufacturer Part Search panel and other areas where Part Choice data could be viewed.
32582	Fixed issue that caused a generated BOM report to open off-screen where previous reports have been opened in a second monitor. (BC:10619, BC:11243)
32802	Fixed bug where replacing multiple selected unmanaged components caused an error for all but the first component. Also resolved issue where Properties panel ellipsis icon would be missing of not function when multiple components are selected for replacement.
32842	Fixed an issue where defining a custom filter in the BOM Status column of a BomDoc returned an empty list, even though the string entered was present in some of the BOM Items. (BC:11345)
33052	Adding a Part Choice to a managed component no longer changes the Name, unless the Name field is empty. (BC:11407)
33121	Added ability to link multiple templates to the same component type, from the Data Management - Component Types page of the Preferences dialog. Enhanced ability to choose each required template from a dynamically-populated list of available templates.
33152	Implemented the possibility to migrate only symbols/footprints using the Library Migrator tool. (BC:10414)
33157	Added new "None" option to the Component Type drop-down in the Library Migrator.
33276	Fixed issue where a PDF BOM report generated into an Excel file format was incorrectly rendered. (BC:11744)
33291	Updated Library Migrator so that a common symbol used for multiple migrated components has a generic Name (Symbol) rather than one adopted from the first migrated library component.
33296	Fixed an issue where the GIT Local Path was not being updated, after the value was edited in the Git Repository dialog.
33397	Fixed an issue that caused the application to show the project as disconnected from the server when the VaultID in the Project file differed from the VaultID from which the project is being opened.
33418	Fixed Output file issue where a particular Template caused incorrect and differing results when a BOM Report is generated to a Folder Structure or a PDF Container. (BC: 11514)
33427	Fixed incorrect Generic XLS output formatting.
33429	Fixed bug where Naming Scheme codes were not supported in the Library Migrator. (BC: 10414)
33769	Fixed a bug that added an additional, unnecessary footprint to appear within the Explorer panel if a component was downloaded from the PCB Library.
33847	Added new option in the 'Use component data' dialog to allow the import of only those parameters that are mapped in the source preferences. (BC:11438)
33926	Fixed bug that caused an error when a component sourced from the Manufacturer Part Search is released from the editor to the server.
34198	Fixed bug that caused .ldb files to not be removed when AD is closed. (BC:3761)
34529	Fixed an issue whereby the BomDoc in a project was being auto-compiled every time a design primitive on an open schematic in that project was being moved. This happened when many schematics and the BomDoc were opened in vertical 'split viewing' mode.
34594	Fixed an issue whereby a footprint that references a 3D model item in the active server could not itself be released, if the name of the 3D model was too long.
34595	Fixed an issue where the Excel VLOOKUP function was not transferring from the BOM template into the final BOM.
34671	Added duplication detection to the Library Migrator, which flags a violation when a library component's Part Choice or a specified Parameter matches that of a component in the
34862	Fixed bug where an OutJob Data Source option selected by the mouse wheel is not applied during generation. (BC:11726)
34970	Improved the behavior of in-grid searching in the Components panel: with a 0.7 sec delay, supporting typing in of multiple search terms, for both managed and unmanaged components.
34997	Edit command added to the Components panel right-click context menu for SVNDbLibs, as an alternative to the pencil edit icon.
35077	Reorganized violations for detected Duplicate Components, when using the Library Migrator. Only one violation of this type will be generated while validating, and that violation will list the server and source components involved.
35146	Enabled Note column visibility in the Item Manager.
35259	Fixed a regression that caused PCB Libraries to not be viewable in the Components panel unless a PCB document was the current active document. A 'Footprints' view has been added to the Libraries menu of the panel.(BC:12166)
35601	Fixed issue that caused Move to Part Choice action to delete Description and Name parameters.
35761	Fixed an issue when the Error message appeared after changing component source in the Properties panel and opening BomDoc.

Importers/Exporters

30197	Fixed an issue in the Allegro PCB importer, where polygon coordinates would be changed if the PCB origin had been moved in Allegro.
30940	Added an option in the OrCAD importer to treat all properties as occurrence properties.
30947	Fixed issue that caused the importer to ignore defined net classes when importing Allegro designs.
30949	Fixed bug where exporting P-CAD ascii files modified the source PCB.
30970	Fixed bug where nets were missing from power and ground ports when importing xDxDesigner designs.
30994	Fixed bug that caused creation of prefixed parameters when importing xDxDesigner designs.
30995	Fixed bug that caused misalignment of power symbols when importing xDxDesigner designs.
30996	Fixed bug where the orientation of some parameters were changed when importing xDxDesigner designs.
31001	Fixed bug where schematic components used more area than their actual size when importing xDxDesigner designs.
31009	Fixed bug that caused mounting holes to not convert successfully when importing Mentor Expedition Designs and Libraries.
31028	Fixed an issue in the Allegro PCB importer, where vias with different sizes per layer were not being imported as Top-Mid-Bottom style vias in the PCB editor.
31326	Added the ability to remap\remove PCB layers when importing Allegro designs.
31327	Added ability to remap\remove PCB layers when importing Mentor Expedition designs.
31328	Added a new feature that adds additional stages for the import process, allowing for the remapping or removal of PCB layers during the import.
31329	Added ability to remap\remove PCB layers when importing Eagle designs.
31516	Fixed bug that caused system to freeze when importing PADS ASCII Design And Library Files in PADS VVX1.2 format.
31855	Allegro Importer now imports rules and clearances from an Allegro Project through the support of XML files generated by the Allegro Constraint Manager.
32173	Fixed bug where off sheet connectors were missing after importing OrCAD Designs and Libraries Files.
32200	Fixed issue with Japanese OS when importing Eagle designs.
32225	Added option to Allegro importer to optimize the creation of clearance design rules.
33852	Extensive improvements and bug fixes in the area of polygon-pour import from Allegro projects.
33853	Completed improvements and bug fixes to the xDxDesigner Importer.
33854	Completed improvements and bug fixes to the Xpedition Importer.
33855	Completed improvements and bug fixes to the OrCAD Importer, including support for multi-channel projects and multi-page schematics.
34234	Fixed issue were importing a specific P-CAD PCB would result in a List index out of bounds error.
34629	Fixed an issue whereby the Allegro Importer would crash when importing a design with the constraints file included.
35381	Fixed an issue that caused a crash when importing an Allegro project.

SIMULATION

33516	Add reworked simulation engine to Altium Designer and Altium NEXUS.
33534	Fixed a crash when the parser processed a functional source and found an incorrect expression.
33535	Improved processing of text constants in the spice-netlist parser.
33536	Checked and improved component nodes, models and nominals description, and interpret any incorrect descriptions as an error.
33541	Added support for math functions inside functional sources.
33547	Improved simulation control options to ensure they are interpreted correctly.
33548	Improved transfer of calculated simulation data to SimView to improve the readability of the graphical results.
33554	Fixed a bug with the SWEEP command, now runs a Parametric Sweep Analysis.
33556	Fixed a bug with adding new waves in SimView.
33557	Added support and fixed bugs in the processing of VSWITCH and ISWITCH models.
33558	Fixed a bug to correctly apply the Level parameter in mosfet models.
33559	Added support for .plot command.
33563	Optimized status bar interaction to better reflect the current status of the simulation.
33564	Improved handling of diode model input parameters, revert to default value when BV=0.
33726	Fixed an issue with default values in XSpice code models that caused the simulation to not start.
33781	Improved speed and reliability of processing embedded XSPICE code models.
33803	Fixed issue when processing nets whose name begins with the '$' symbol.
33804	Fixed the processing of unnecessary transistor parameters when those are defined by .param directive.
33890	Fixed detection of the recursive subcircuits.
33905	Fixed processing of nested subcircuits.
33934	Fix syntax of sweep command.
33993	Fixed units in the x axis signature.
34126	Fixed circuit's matrix decomposition in the case of a singular matrix
34222	Determine if the encrypted PSPICE model is used in the circuit and send the appropriate message.
34223	Determine if the encrypted LTSPICE model is used in the circuit and send the appropriate message.
34224	Determine if the encrypted TINA-TI model is used in the circuit and send the appropriate message.
34327	Fixed plotting of numbers in the e-notation.
35293	Fixed calculation of expressions with pwr() and pwrs() functions.

Draftsman

27909	Fixed a bug that caused various objects to disappear when generating PDFs in a Draftsman document. (BC:6801)
32047	Fixed Draftsman crash that occurred after importing changes from a PCB document and then selecting another Draftsman page.
32253	Fixed crashed when generating Draftsman PDF from OutJob for a particular Assembly View in document.
32654	Added the capability to specify row height in a custom table object.
32655	Updated Draftsman Layer Stack Legend labeling to rename Copper Plating to Surface Finish, corresponding to the Layer Stack Manager.
32811	Fixed Draftsman issue where component designators on an Assembly View could not be moved (Ctrl+drag) in the source area of a Detail View.
32844	Fixed issue where 'Application_BuildNumber' special string parameter was not being interpreted. (BC:8700)
32926	Fixed an issue where Draftsman was not presenting the surface finish layer correctly in the Layer Stack Legend when the board included back-drilled vias.
32996	Added the ability to align text horizontally within columns in a Drill Table.
34035	Fixed issue in Draftsman where Designators could disappear if changed to Manual position mode.
34611	Added the ability to export in DXF format. (BC:7094)
35192	Fixed multiple Draftsman output bugs - Variant selection ignored when set in OutJob file; only documents that have been opened printed; 'All Draftsman Documents' option not available in output selection drop down menu. (BC:8278)
35500	Fixed a regression in which column numbering within the Bill of Materials table were changed after the value in the Designator field was altered.
35559	Fixed issue that caused invalid sized items when exporting DXF files from Draftsman.

BOM

27062	Excel templates are now correctly applied when the Generic XLS format is selected for BOM generation, and page setup settings are now correctly applied when generating a PDF. Note that for performance reasons, the Excel template must use the correct cell format for the cell contents.
32817	Fixed issue where a BOMdoc's Manual Solution was being deleted in response to a component being modified and updated. (BC:11312)
32999	Fixed PDF generation degradation.
33405	Fixed bug which occurred during BOM generation with MS-Excel native file format failed, when a Variant name contained the '/' symbol (BC:11461).
33416	Fixed bug in ActiveBOM, where pricing for Manual Solutions were rounded to whole cents (BC: 11418).
33428	Fixed issue that caused some manufacturer links to not display in the ActiveBOM. (BC: 11515)
33820	Fixed an issue in ActveBOM where some Manufacturer Links were not being loaded correctly.
33991	BOM Generation from an Outjob to a Folder Structure Output Container now displays an Error message dialog if the BOM is currently open.

COMPONENTS PANEL

32131	Changed behavior of Place Component shortcut (PP) so focus is set to the Search field in the Components panel.
32387	Added ability to merge multiple selected Component Types into a single specified Component Type. Accessed in the Data Management - Component Types page of the Preferences dialog.
32780	Fixed Component Panel issue where some columns could not be correctly sorted by value. (BC:10476)
32993	Added support for the arrow keys to operate in the Categories list of the Components panel, use the Up/Down keys to walk through the list and the Left/Right keys to open/close branches. (BC:10473)
33333	Fixed an issue whereby the information text associated with the footprint preview - on the Components panel - could not be read easily when using the Altium Light Gray theme (BC:11379)
33801	Added the ability to share Components panel settings between installations through use of DXP preference files.
33812	Fixed an issue where the stored screen location value for the Select Columns dialog resulted in the dialog not being visible due to changed monitor configurations. (BC:11708)
33885	Added a new 'Apply to all libraries' feature within the Extract Sources or Install dialog.
35546	Fixed a performance degradation issue that occurred when searching for Footprints from Component's panel File-based Libraries Search.
35550	Fixed issue that caused crash when executing Components panel File-based library search for Footprints.
35581	Fixed issue where the Components panel was not refreshed (updated) when launching the 'IntegratedLibrary:RefreshInstalledLibraries' command.

MULTI-BOARD

30988	Added support for exporting a Multi-board Assembly as a 3D PDF, options to include copper, silkscreen, soldermask and 3D bodies.
30989	Added the ability to export Multi-board Assembly documents as PDF3D documents. (BC:8798)
30990	OutputJobs now support 3D PDF generation of a Multi-board Assembly.
32835	Fixed issue where the Multi-board Schematic Editor did not use the scroll/zoom behavior specified in the Mouse Wheel Configuration preferences. (BC:9132)
33466	Fixed a Multi-board Schematic error that would occur when attempting to edit pin mating in the Module Entry properties.
33472	Multi-board Assembly editor now obeys the Mouse Wheel Configuration settings in the Preferences dialog.
33809	Support for ActiveBOM added to Multi-board Assemblies.

Historical Public Release Notes for Standalone Altium Designer

Altium Designer 25

Schematic

PCB

Constraint Manager

Draftsman

CAMtastic

3D-MID Design

Multi-board Design

Harness Design

Platform

Data Management

Import/Export

Circuit Simulation

SI Analyzer by Keysight

Schematic

PCB

PCB CoDesign

Constraint Manager

Draftsman

Harness Design

Platform

Data Management

Import/Export

Schematic

PCB

PCB CoDesign

Constraint Manager

3D-MID Design

Harness Design

Platform

Data Management

Import/Export

Schematic

PCB

PCB CoDesign

Constraint Manager

Draftsman

Wire Bonding

Multi-board Design

Harness Design

Platform

Data Management

Import/Export

Schematic

PCB

PCB CoDesign

Constraint Manager

Draftsman

Wire Bonding

Harness Design

Platform

Data Management

Import/Export

Power Analyzer by Keysight

Schematic

PCB

PCB CoDesign

Constraint Manager

Wire Bonding

Multi-board Design

Harness Design

Data Management

Import/Export

Power Analyzer by Keysight

SI Analyzer by Keysight

Schematic

PCB

PCB CoDesign

Constraint Manager

Draftsman

Wire Bonding

Harness Design

Platform

Data Management

Import/Export

Power Analyzer by Keysight

SI Analyzer by Keysight

Other

Schematic